withdrawal force verification test apparatus

Brand Name:kingpo

Model Number:KP-BCL03

Place of Origin:china

...Verification Force Plug Socket Tester Apparatus Product details: This Tester is designed to meet the exacting requirements of major international standards such as IEC 60884-1 Fig 18 and Fig 19. It is used to test whether the maximum force of pulling the plug from the socket and the minimum force...

Brand Name:Sinuo

Model Number:SNQC1013

Place of Origin:China

Withdrawal Force And Latching Verification Test Apparatus For Vehicle Connector IEC 62196-1 Product Information For Withdrawal Force And Latching Verification Test Apparatus: This test equipment conforms to IEC 62196-1:2022 clause 14.1.5, 14.1.6, fig13, fig14. It is used to check the withdrawal force required when the test plug is withdrawn from the socket-outlet and latching device. Technic Requirements For Withdrawal Force...

Brand Name:Sinuo

Model Number:SNQC1013

Place of Origin:China

... Overview It is used to check the withdrawal force required when the test plug is withdrawn from the socket-outlet and latching device. Technical Parameters A Withdrawal force The switched EV socket-outlet or switched vehicle connector with interlock is

Brand Name:SHC

Model Number:SC-BC02

Place of Origin:China

... pulled out from the socket assembly. Whether the minimum force required is within the range specified by the standard. Parameter: 1. Standard one-pole 10A, three-pole 10A and 16A test standard plugs each, 10A 16A test standard plugs each, adjustable: 1)

Brand Name:Pego Electronics

Model Number:PG-WDFA2

Place of Origin:China

...Withdrawal Force Testing Equipment / Apparatus for Checking Withdrawal Force of Appliance Couplers 1. Introduction he appliance couplers withdrawal force testing equipment is designed according to IEC60320-1 figure 3 and figure 4 and clause 16 for verification of the maximum withdrawal force of appliance inlet/plug connector, the minimum withdrawal force is verified by inserting the test...

Brand Name:HJ

Model Number:HC9916

Place of Origin:China

...-1 ‘Plugs and socket-outlets for household and similar purposes – Part 1: General requirements’ clause 22, table 16 and figure 18. Application of Apparatus For Checking The Withdrawal Force:

Brand Name:HongCe

Model Number:HO6502

Place of Origin:China

... to ascertain the maximum force necessary to withdraw the connector from the appliance inlet and the minimum force necessary to withdraw a single pin gauge from the appliance inlet, it can also for testing connectors for hot conditions and those for very

Brand Name:SKYLINE

Model Number:SL-PL31

Place of Origin:China

...Force Test Machine Product introduction Insertion Force Testing Machine is suitable for connectors insertion and withdrawal force tests, the use of unique device automatically matched to find the heart of a variety of special fixture connector, the plug can be completely accurate force results. All the testing informations are setting by the computer and it can automatically store testing condition,test...

Brand Name:HOOHA

Model Number:ZY6257 10MW

Place of Origin:China

..., warehouses and components) and extensive fire resistance test verification for raw materials, buildings and physical models Meet the standard: 1. Comply with the test standards of ISO 9705 "Fire tests; full-scale room test for surface products"; 2.

Brand Name:KINGPO

Place of Origin:China

... details: This plug pin force verification tester is designed to meet the exacting requirements of major international standards such as IEC 60884-1 Fig 18 and Fig 19. It is used to test whether the maximum force of pulling the plug from the socket and the

Brand Name:HOOHA

Model Number:ZY6257 10MW

Place of Origin:Guangdong

..., warehouses and components) and extensive fire resistance test verification for raw materials, buildings and physical models Meet the standard: 1. Comply with the test standards of ISO 9705 "Fire tests; full-scale room test for surface products"; 2.

Brand Name:vouch

Model Number:5201

Place of Origin:CHINA

...electrode was used, and the force of the two poles on the sample was 1.0 N; 0.05 N, respectively. The applied voltage is adjustable between 100 and 600V (48-60Hz), and the short-circuit current is 1.0; 0.1A, the ...

Brand Name:PTE

Model Number:Price Tensile Test Apparatus

Place of Origin:China

... force, and elongation of materials, components, and finished products. It is widely used in controling material quality. Application Industries Textile Fabrics Tensile Strength Testing Machine/Tester Price is widely used in most of industries: Rubber &

Brand Name:TONY

Model Number:TNJ-002

Place of Origin:China

...tester.It is simple to operate. Force value can be adjusted through the pressure changes in the precision pressure regulating valve.With high precision power sensor, it can induct the force value immediately. Every load group can be adjusted to control by

Brand Name:JLX

Model Number:LX-6202

Place of Origin:Made in China

...Test Smallest Opening Width and Smallest Withdrawal Force of Contact Sockets Lehre 2 – Lehre zur Prüfung der kleinsten Öffnungsweite und der kleinsten Abzugskraft der Kontaktbuchsen Germany plug and socket gauge is strictly designed and manufactured according to the relevant standard requirements of VDE0620-1:2010. This plug and socket test gauge is mainly used to test...

Brand Name:lixian

Model Number:HZ-1003A

Place of Origin:CHINA

...Testing Apparatus Tensile Testing Equipment Steel metal welding tester with capacity 20kN It can be applied to test lots of materials in rubber tensile elongation,compression, tear, big size peel (can 90 degrees and 180 degrees) and other mid-force mechanical test...

Brand Name:YUYANG

Model Number:YY154

Place of Origin:China

...Test Apparatus, Flammability Testing Equipment Description: UL910/NFPA262 Steiner horizontal tunnel furnace is mainly used for the flame retardant performance test of CMP grade wire and cable. It is mainly used for cables in horizontal subsystems that are directly laid in ventilation or forced ventilation without metal pipelines. The flame retardant test...

Brand Name:DAXIAN

Model Number:DX1014

Place of Origin:China

...Test Apparatus , Flammability Testing Equipment Description: UL910/NFPA262 Steiner horizontal tunnel furnace is mainly used for the flame retardant performance test of CMP grade wire and cable. It is mainly used for cables in horizontal subsystems that are directly laid in ventilation or forced ventilation without metal pipelines. The flame retardant test...

Brand Name:HAIDA

Model Number:HD-B609

Place of Origin:Guangdong, China (Mainland)

...), release paper, plastic films, leather, rubber & plastic, paper, fiber, etc. 2. Different test with different grips: tensile, peel, tear, heat seal, adhesive, bend and open force. 3. Deformation under defined load: Test deformation under defined load of

Brand Name:SAMYON

Model Number:ZJ

Place of Origin:CN

...Apparatus Application: ZJ Light-duty Strain Controlled Direct Shear Apparatus is a kind of strain controlled direct shear apparatus used to test resisting shear strength of soil specimen, it usually adopts four specimens under the different vertical pressure(50, 100, 200, 300, 400kPa (hanger is first grade)), to exert horizontal force...