iso footwear testing equipment

Brand Name:GAOXIN

Model Number:GX-5010

Place of Origin:China

Vamp Flexing Grips 12 Groups Shoe Bending Grips 3 Groups Freezing Test Chamber The vamp flexing testing grips is a continuous flexing quick action in a low temperature condition, which simulates the situation in which the shoe surface is squeezed, ...

Brand Name:SKYLINE

Model Number:SL-L105

Place of Origin:China

...ISO 20344 Footwear Testing Equipment Sole Flexing Tester Use: Install the sole test piece on the EN sole flexing testing machine, so that the incision falls just above the center of the rotating shaft of the EN sole flexing testing machine, and drive the test piece on the shaft through the machine to stretch flexing (90±2)º .After a certain number of tests, measure the length of the incision of the test...

Brand Name:HTI

Model Number:HTX-053

Place of Origin:Guangdong,China(mainland)

Electronic Footwear Testing Equipment ISO Cold-resistance Tester Detailed Descriptions: Cold-resistance tester is used for testing Cold-resistance of the footwear. Testing method:Fix thermocouple on the centre of the insole.There are many steel balls ...

Brand Name:HAIDA

Model Number:HD-P936

Place of Origin:China

... resistance performance of outsole, forepart and heel can be evaluated accordingly. The principle The item of footwear to be tested is put on a surface, subjected to a given normal force, and moved horizontally relative to the surface( or the surface is

Brand Name:Lixian

Model Number:HZ-3601

Place of Origin:China

...± 5cpm Bending angle 0 degree to 90 degree Timer 6 digital Size 85×40×70cm Number of shoe 4 pcs Footwear Testing Equipment Summary HZ-3601 Finished shoes bending testeris mainly used to test the property of finished shoes and sole resist to

Brand Name:Haida

Model Number:HD-P936

Place of Origin:China

... and the slip resistance performance of outsole, forepart and heel can be evaluated accordingly. The Principle The item of footwear to be tested is put on a surface, subjected to a given normal force, and moved horizontally relative to the surface( or the

Brand Name:YUYANG

Model Number:YY1510

Place of Origin:China

...ISO AATCC JIS Perspiration Testing Equipment for Footwear Description: Competely and averagely soak specimen into acid and alkaline artificial sweat liquid for 30 minutes. Use the meter to press it then put into oven at temperature of 37°C for 4 hours. Take out specimen from oven to appraise grade of dry-endurance against comparision of grey scale mark after dry. Specification: Specification Specimen Acrylic plate Load ISO...

Brand Name:kingpo

Model Number:ISO 18250-3 Fig C.4

Place of Origin:china

ISO 18250 Test Equipment ISO 80369-3 Figure C.4 Cross Reference Connectors ISO 80369-3 Small-Bore Connectors for Liquids and Gases in Healthcare Applications - Part 3: Connectors for Enteral Applications; ISO 80369-3 Figure C.4 Cross Reference Connectors is for testing cross port reservoir connector for: ISO 18250-3 Clause 6.5: Resistance To Separation From Axial Load ISO...

Brand Name:Great Win

Model Number:GW-034B

Place of Origin:CHINA

...testing machine/equipment (GW-034B) • Brief introduction: This machine is used to test the bonding strength of the toe caps. Inspection on the soles and uppers, with steady increase of separation forces make soles and uppers separation, to test the peeling strength between the separations to assess the quality of shoes. • Technical Specifications: Model GW-034B Shoe peeling strength testing...

Brand Name:RISING

Model Number:RSCX

Place of Origin:China

...power source is only less than 1/10 of measured equipment; with smaller volume and lighter weight compared with the equipment in same capacity. The device with large output capacity and small power supply capacity, low cost, easy to operate and safe. 2

Brand Name:ZL

Model Number:ZL-9006B

Place of Origin:CHINA

... strength) special test equipment. The board puncture strength tester with fast compression, operating handle automatic reset and safety reliability, with a liquid crystal display, ...

Place of Origin:China

Brand Name:CHENGFENG

Six Group Swing Testing Machine Suitable for Testing the Bending Strength of Many Kinds of Cables Specification item value Warranty 1 Year Customized support OEM, ODM, OBM, Software reengineering Place of Origin China Guangdong Brand Name CHENGFENG Model ...

Brand Name:Techcore

Model Number:5" Retrievable Bridge Plug

Place of Origin:China

Retrievable Bridge Plug For Well Downhole Testing / Completion The 3L retrievable bridge plug consists of packer-type sealing elements, mechanical slips, and a large-area bypass. The sealing elements of retrievable bridge plug are less susceptible to ...

Brand Name:JINHAIHU

Model Number:DJC-1

Place of Origin:BEIJING, CHINA

DJC-1 Single wire cable vertical combustor Scope of application The vertical combustion tester of single wire and cable is mainly used to evaluate the combustible properties of single wire and cable with conductor diameter greater than 0.8 mm or cross ...

Brand Name:LIYI

Model Number:LY-3050

Place of Origin:China

...rubber, lose tire, conveyor belt transmission belt, sole, soft leather, synthetic leather such material abrasion test, with the highly efficient, good reproducibility and easy operation properties Purpose: Flexible materials DIN abrasion testing machine is

Brand Name:HongCe

Model Number:HCAO1000

Place of Origin:China

... clause 8.1 of IEC 60811-1-2 ‘Common test methods for insulating and sheathing materials of electric and optical cables — Part 1-2: General application — Thermal ageing methods’ and etc. . The equipment is suitable for the heat resistance test of

Brand Name:HJ

Model Number:HH0810A

Place of Origin:China

...Climatic loads clause 5.10 dust test; ISO 20653-2013 Road vehicles — Degrees of protection (IP code) — Protection of electrical equipment against foreign objects, water and access, figure 1- Principle test set-up for determining the protection against

Brand Name:Sinuo

Model Number:SN4421

Place of Origin:China

... and tests for electrical and electronic equipment Part 4: Climatic loads 5.4.2 water splash test and 5.4.3 immersion test. Equipment Overview This product is suitable for products that may be exposed to water at different ambient temperatures during

Brand Name:AI

Model Number:AIC-19921

Place of Origin:CHINA

...Test Equpiment for Valve, Hose & Pipes Introduction: This fire resistance test equipment complies with the following standards: • Valve Fire Test (ISO 10497) • Fire Test hoses (ISO 19921 & 19922) • Plastic Pipe Fire Test (FTP II Res A 753) In the case of internal pressure, valves using a burner simulation of fire, for marine and similar joints of pipe and fire resistance test...

Brand Name:KeJian

Model Number:KJ-1065A-H

Place of Origin:China

...10kg Capacity Adhesive Tape Peel Adhesion Strength Test Equipment is designed for quick and reliable pull, tensile, compression, bending, shear, peel and fatigue cycling on metals, composites, alloys, rigid ...