5m flow vertical sand pump

Brand Name:Y&X

Model Number:vertical sand pump

Place of Origin:China

Laboratory Centrifugal Pump Sand Mines Low Noise with ISO9001 Main uses and characteristics: XBSL vertical sand pump is mainly used for transporting ore slurry and discharging tailings in laboratory, and also for transporting medium in coal preparation ...

Brand Name:BSK

Model Number:Vertical Sewage Pump

Place of Origin:Guangzhou

Axial Flow Vertical Sewage Pump Waste Water Submersible Acid Resistance​ Vertical Sewage Pump Application: Cooling water system Water supply: water transportation in water plants, boosting system in high buildings pressure boosting in main ...

Model Number:LSB Series Vertical Sand Pump

Place of Origin:China

... pump,is applicable to transmission of abrasive slurry.Submerged in liquid,the pump operates in a pond or pit.The level of slurry circulated in a slurry pond shall be not lower than the center of pump outlet but not higher than 1/3 of the height of the

Brand Name:TR Solids Control

Model Number:TRSB Series

Place of Origin:Xi'an,China

Vertical Sand Pump – Reliable Slurry Transfer for Drilling & Industrial Applications Product Description The Vertical Sand Pump is a heavy-duty slurry transfer pump specifically designed for the continuous handling of abrasive drilling mud, sand-laden fluids, and high-density slurries. Installed vertically, this pump...

Place of Origin:CHINA

...-stage centrifugal pump, mainly used to transport mortar and slurry media. It is one of the necessary products for the drilling mud purification system of petroleum mines. This product is installed on the top of the tank, ...

Place of Origin:CHINA

Brand Name:BAITAI

Submersible sand pump/Vertical sand pump/Submersible slurry pump/Hydraulic sediment pump/Pipeline sediment pump/Submersible mixer

Brand Name:SHIZA

Model Number:AF

Place of Origin:China

...can eliminate the froth or foam in the running slurry and work normally even if the feeding slurry is not enough.The pump wet parts are made of Ni-hard and high chromium wear-resistant alloy materials. Funnel charging box is of steel structure. It can be

Brand Name:TR Solids Control

Model Number:80YZ50-20

Place of Origin:Xi'an,China

Solid Control System Submersible Slurry Pump for Oil Drilling Main Product Introduction Submersible slurry pump normally is used for feeding shale shaker for CBM, HDD or other drilling industry. It is vertical single stage and single suction system and mad...

Brand Name:Chengdu Yongyi

Model Number:ZJL

Place of Origin:Sichuan, China

...Vertical Slurry Pump Solid Handling Sand Pump 6 ~ 364m³/h Capacity Parameter Data Model: ZJL-series vertical slurry pump Discharge Size: 40mm~200mm Inlet Size: 50mm~250mm Capacity: 6 ~ 364m³/h Head: 4 ~ 60 m Maximal Efficiency: 70% NPSH: 1.4m~3.5m Allowable Max Motor Power: 315 kw Impeller Allowed Max Particle Size: 20 mm Vanes: 5/6 Seal Type: / Type: closed/ half open Pump...

Brand Name:CNSME

Place of Origin:China

...auxiliary impeller to reduce the back pressure of the impeller and extend the life of the seal. At the same time, the flow parts are made of white wear-resistant cast iron, which is resistant to abrasion. The flow parts and inner lining of the pump are

Model Number:6/4D-G

Place of Origin:China

...Sand Gravel Pump Gravel Pump Model 6/4D-G Inlet/Outlet size 150mm/100mm Capacity 39-250m3/h Head 7-50m Speed 600-1400rpm Max. Power 60KW Max.Solid 82mm NPSH. 2.5-3.5m Seal type Gland packing,Expeller,Mechanical Gravel sand pump application: Gravel pumps are designed for continuously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump...

Brand Name:HuiChi (HC)

Model Number:HSB Series

Place of Origin:China

Horizontal Or Vertical Structure Sand Pump For Supporting Circulating Solid Control System In Oil And Gas Drilling ________________________________________Product Description: The sand pump is one of the indispensable key equipment in the solid control sys...

Place of Origin:China

Model Number:G

...Sand Pump Parts Main parts 1. Support frame: main part for supporting flow parts, connect with bearing glands on the two sides to form bearing assembly. 2. Pump casing: connect with support frame by 6 bolts, can rotate in 60°gap according to needs, impeller, protecting plate, pump cover installed inside, material is abrasion resistant, the impeller, pump casing and pump cover of this pump

Brand Name:Aier Machinery

Model Number:WL

Place of Origin:Hebei

...flow capacity slurry pump with anti-abrasive material A05, Cr26, Cr27 for gold mining, coal wing, tailing Pump introduction Sand slurry pump is the standard middle duty slurry pump which designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements. Sand slurry pump is the standard light duty slurry pump which designed for the continuous pumping...

Brand Name:SLAPK

Model Number:120 m3/h New Generation Efficient Energy-Saving Vertical Sewage Pump

Place of Origin:China

... seal waterproof, impeller guide flow vane, high water flow, operate indefinitely, IP68 protection. 2. The weight is light, mounted simple, and convenient maintenance. 3. Centrifugal impeller,axial flow impeller,mix flow impeller design,low head and

Brand Name:XBSY

..., mining tailings, and more), this heavy-duty unit is crated up and prepped for shipment—engineered with rugged durability, efficient flow, and reliable performance for the harshest working environments (think oil/gas drilling sites, mining operations,

Place of Origin:China

Brand Name:naipu

... pumps Drvie Type: BD/DC Power: Motor Discharge Size: 40mm-200mm Capacity: 5.4-247.5 l/s Head: 4.5m-37m Feature: ♣SP pumps are vertical, centrifugal slurry pumps submerged in sump to work. ♣They are designed for delivering abrasive,large particle and

Brand Name:Taishan

Model Number:3PNL

Place of Origin:Jinan

.... In positive circulation drilling, it is used for mud positive circulation; in reverse circulation drilling, it is used for pouring water into the suction pipe of the sand pump; and in case of insufficient natural flow of