wireline in situ test sub

Brand Name:Ruixin

Model Number:2inch ID 2.5inch ID 3inch ID 4.06inch ID 5-1/8inch ID

Place of Origin:China Baoji

...remove the tools within. When this joint is reconnected it is normal practice to fill and pressure test the entire lubricator system prior to opening the wellhead valve. The Wireline In-Situ Test Sub allows for only the joint that was broken to be tested,

Place of Origin:CHINA

Brand Name:SINOCOREDRILL

Model Number:BWL NWL HWL PWL

... Good performance High-toughness wear-treatment process Accuracy and interchangeability 1.Adapter sub’s description Large-scale, production-rope drill pipe joints, using imported molding tooling and produced threaded plug and ring gauges testing to

Brand Name:Aoxing

Model Number:40-500mm

Place of Origin:in Plywood Case

...Wireline Inflatable Packer (NQ HQ PQ) The Lugeon test, sometimes call also Packer test, is an in-situ testing method widely used to estimate the avarage hydraulic conductivity of rock mass. It is indeed In situ test of formation permeability performed by measuring the volume of water taken in a section of test...

Brand Name:Techcore

Model Number:ST 16-70

Place of Origin:CHINA

Wireline Pump-in Sub Wireline Pressure Control Tee WPCE Crossover The Pump-in Tee/Sub is a necessary part of a wireline rig-up design, normally located above the wellhead and below the wireline BOP , the pump-in tee / pump sub is used to provide convenient entry path for large flow fluid into pressure control equipment, the pump-in sub is applied for hydrostatic testing or for well control by pumping fluids into the well below a closed wireline