wire and cable testing machine

Brand Name:HOOHA

Model Number:QJ57 DC Kelvin Bridge

Place of Origin:Guangdong

... or workshop site and field work place, to test DC resistance, resistivity inside of metal conductor, resistance of conductor line, resistance of DC shunt, contact resistance of switch and appliance; winding wire resistance of various of motors and

Brand Name:ZL

Model Number:ZL-1004

Place of Origin:China

Wire and Cable Testing Machine , AC and DC High Voltage Tester Equipment description: AC - DC high - voltage Tester input voltage 220V/±10% 50/60HZ,output voltage AC:0~10KV DC:0~10KV. Technologic parameter: Model: ZL-1004 Input voltage: 220V/±10% 50/60HZ Output voltage : AC:0～10KV DC:0～10KV Breakdown current : 0.5,1,3,5,10,20mA Testing...

Brand Name:HOOHA

Model Number:QJ57 DC Kelvin Bridge

Place of Origin:DONGGUAN

... or workshop site and field work place, to test DC resistance, resistivity inside of metal conductor, resistance of conductor line, resistance of DC shunt, contact resistance of switch and appliance; winding wire resistance of various of motors and

Place of Origin:China

Brand Name:CHENGFENG

...testing machine for automotive wires and cables Scope of application: suitable for low-voltage primary cables for ground vehicle electrical systems with rated DC voltage of 60V (AC 25V) or below. The test in this paper is to test the quality of the cable under the action of limited fluid and physical stress. Standards: EN 50618-2014, SAE J 1128-2005 test...

Brand Name:GOLD

Model Number:GD-IEC60754

Place of Origin:China

...Wire And Cable Halogen Acid Gas Release Tester IEC60754 Wire And Cable Halogen Acid Gas Release Tester Product Introduction: The halogen acid gas release measuring device is designed and manufactured according to the test methods GB/T 17650 IEC 60754-1 and IEC 60754-2. It is used to test the halogen gas content, pH value (hydrogen ion content), conductivity, etc. released by wires and cables during combustion. IEC60754 Wire And Cable

Brand Name:HERRMAN

Model Number:3KV-35KV

Place of Origin:CHINA

Wire Cable Testing Machine AC Series Spark Tester We are the special manufacturer for producing AC series wire sparker. It is main technological properties correspond to JB/278.10-1993 standard. It can be used to check the insulating level of wire & cable...

Brand Name:Wiremac

Model Number:/

Place of Origin:China

... wires and cables Speficiation 1,Power:AC220V 2,Maximum detection voltage:15KV or 25KV 3,Electrode length:600mm Feature 1,The instant sparks will not damage the good insulation of the cable conductors. 2,There is a linkage signal control with the take-up

Brand Name:AISRY

Model Number:ASR-5622B

Place of Origin:China

...Wire And Cable Testing Machine Product Introduction: Wire bending test machine for plug leads, power cord, USB cable, headphone cable, audio cable, headphone cable and other finished wire bending test or swing test. This machine is the sample fixed on the fixture, and add a certain load, the test...

Brand Name:AI

Model Number:FIPEC

Place of Origin:CHINA

...Behaviour of Bunched Cable Testing Machine INTRODUCTION EN 50399 specifies the apparatus and methods of test for the assessment of vertical flame spread, heat release and smoke production of vertically-mounted bunched wires or cables, electrical or optical...

Brand Name:I-SUNTOP

Model Number:XL-313B/C

Place of Origin:china

... requirement, Application range:It is designed to measure the insulation thickness of the measuring wire.It is desktop-type, the scale is bolted to the base, and it is not required to carry the hand. The needle fixture is also accurate for the test of the

Brand Name:DAXIAN

Model Number:DX8301

Place of Origin:China

... and communication cables. Technical Parameters: Table width: 280mm Slice width: not more than 100mm Slice thickness: 1～12mm Power supply: 380V/50HZ ...

Brand Name:YUYANG

Model Number:YYW-005

Place of Origin:China

..., iron and other metal materials. This machine is made of metal materials do damage elongation test; advanced software design and sophisticated electronic sensor technology to measure the amount of tensile test, and automatically converted to LED than

Brand Name:KingPo

Model Number:HD-6159E

Place of Origin:China

...Wire Taper Rotation Testing Machine Simulating under Certain Load Conditions Description: HD-6159E instrument is suitable for testing the service life of wires and planes with a certain degree of taper rotation, and simulating the service life of the tested products under certain load and load conditions. The instrument has built-in low-voltage and high-current load, which can be externally connected with a momentary break test

Brand Name:Infinity Machine

Model Number:RS-8100

Place of Origin:Made in China

...Cable Testing Machine Bending Endurance Test Adjustable Model: RS-8100 Application: Apply for bending endurance test for cable connected with plug. Fix the sample on jig and put the weight at the cable, then to swing the jig right and left with the setting angle. after rotating to required cycles then stop to check the cable; or check the rotation cycles after cable broken while the cable is tested...

Brand Name:Gaoxin

Model Number:GX-4007

Place of Origin:China

Cable Wire Softness Tester For Winding Flexibility Test In Cable Testing Equipment 1.Quick Details: Alternative name Winding flexibility tester Function Test softness of cable when winding Feature Electric drive Weight 100kg Volume 600×1500×700cm Test standard JIS, CNS 2.Equipment Description: Put a 5mm cable on two wheels, give some loading on two ends and let the electricity cycled at speed of 0.33m/sec with test...

Place of Origin:China

Brand Name:KeRang

...cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods. Application:Applicable to the DC resistance measurement of variety of power cables and electrical equipment, wire and cable equipment specified in "Test...

Brand Name:YUYANG

Model Number:YYW008

Place of Origin:China

...Wire Elongation Rate Test Machine Copper Wire and Cable Elongation Testing Equipment Product Description: Copper Wire And Cable Elongation Tester For Aluminum is suitable for aluminum, copper, iron and other metal materials to measure elongation. The tester is testing...

Brand Name:JIEDONG

Model Number:JD-3003

Place of Origin:Guangdong, China

Wire Torsion Bending Test Machine 1 Station Test Swing Angle 0-360 Degrees Wire Torsion Testing Machine JD-3003 product description: Designed and manufactured according to GB4909.4, ISO2627/R957, CNS-1111/8938, UDC621.315.14/620.175 and JIS3005, suitable for small household appliances such as hair dryers, hair clips, power cords for manufacturers and quality inspection departments. Torque test, electrical connection of earphone cable, data cable

Brand Name:Lonroy

Model Number:LR-8S

Place of Origin:China

...Wire tube bending test machine Solar Panel Tester Conduit Bending Testing Machine 1. Product Introduction Purpose of the wire tube bending test machine: The photovoltaic module wire tube bending test machine uses a certain weight to apply to the wire tube, and then rotates the wire tube at a certain speed to judge the bending and twisting resistance of the photovoltaic module wire tube. 2. Applicable standards for wire...