w ni cu tungsten alloy plate

Brand Name:Forged

Model Number:customized

Place of Origin:Luoyang Henan, China

high density tungsten nickel copper W-NI-Fe alloy bar rod counterweight Feature Tungsten alloy rod has high density, high melting point, small size, high wear resistance, high hardness, high tensile strength, high elongation, high temperature resistance...

Brand Name:PRM

Model Number:custom

Place of Origin:China

...even tungsten-nickel-copper-iron. Some tungsten alloys also add other metal elements such as cobalt, molybdenum, and cadmium. It can be made into various shapes. High specific gravity tungsten alloy tubes are usually used to make nuclear radiation shields,

Place of Origin:China

Brand Name:Satellite

Model Number:W232,W262,W273,W263,W252,W221,W242

...Tungsten Alloy plate 1. Width*Length: (2.0-250.0mm)*(2.0-250.0mm) 2. Thickness: 2mm-15mm 3. Density: 15.8-18.50 g/cm3 4. Composition: W content: 85-97%, W-Ni-Fe, W-Ni-Cu 5. Surface: Sintering surface, Ground surface The main performance of the tungsten alloy...

Brand Name:SANHUI

Model Number:WNiCu WNiFe

Place of Origin:China

...Density 15.8-18.50g/cm3 Composition W content: 85-97%, W-Ni-Fe, W-Ni-Cu Surface Sinter state, finish state Size according to your drawing or requirement. Application balance weight, Military industry Introduction The density of tungsten heavy alloy is very

Brand Name:JX

Model Number:Tungsten Nickel Copper Alloy W-Ni-Cu

Place of Origin:China

..., but also has copper of high thermal conductivity properties, and the tungsten and copper in the thermal expansion coefficient and thermal conductivity can be adjusted with the W-Cu composition, also the composite can be machined to various shape, these

Brand Name:Hilbo

Model Number:AZ31 AZ61 AZ91 AM80

Place of Origin:China

...: 0.6-1.4%, Mn: 0.2-1.0%, Si: 0.1%max, Fe: 0.003%max, Ca: 0.04%max, Cu: 0.01%max, Ni: 0.001%max, Others: 0.3%max; Mg: remainder 2) AZ61A Al: 5.8-7.2%, Zn: 0.4-1.5%, Mn: 0.15-0.5%, Si: 0.1%max, Fe: 0.005%max, Cu: 0.05%max, Ni: 0.005%max, Others: 0.3%max;

Brand Name:OEM

Model Number:various

Place of Origin:China

... Performance Tungsten Alloy Ball Weights Tss Super Shot Pellets Description Name Tungsten super shot tss Diameter 1.9mm,2.0mm,2.15mm,2.25mm,3mm--100mm (customized your need) Density 15.8-18.75 g/cm3 Composition W content: 85-99%, W-Ni-Fe, W-Ni-Cu Surface ...

Brand Name:Sifon

Model Number:75WCu

Place of Origin:China

...tungsten copper alloy tungsten copper plate as Electronic packaging materials Products detail: W-Cu heat sink material is a composite of tungsten an copper, with both tungsten low expansion characteristics, but also has copper of high thermal conductivity properties, and the tungsten and copper in the thermal expansion coefficient and thermal conductivity can be adjusted with the W-Cu...

Brand Name:Tankii

Model Number:Ni Cu alloy

Place of Origin:CHINA

Monel 400/ monel k500 Ni Cu alloy sheet strip with good quality size customized Characteristic as below: Monel 400 is an extremely combination property that use for largest amount and most widely corrosion resistance alloy. This alloy in the hydrofluoric ...

Brand Name:Hypersolid Metal

Place of Origin:China

1,Description: Material: Tungsten copper plates are composed of a composite material consisting of tungsten (W) and copper (Cu). Density: The density of tungsten copper plates typically ranges from 14.5 to 16.5 grams per cubic centimeter (g/cm³), depending...

Brand Name:DLX

Model Number:CuNi Wire

Place of Origin:China Jiangsu

Product Description: One of the key features of this Copper Nickel Alloy is its Emf Vs Cu of -28 UV/C. This means it has a relatively low potential for galvanic corrosion when used with copper and other metals, making it an excellent choice for use in ...

Brand Name:TISCO HW

Model Number:Monel 400

Place of Origin:Jiangsu, China

...Alloy Plate Thickness 0.12mm 1.2mm Factory Cheap Hot Rolled Nickel Alloy Monel 400 Stainless Steel Sheet /Plate / Coil Product Description: Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy...

Brand Name:HMD

Model Number:NONE

Place of Origin:CHN

... 0.003 0.005 0.008 0.003 Al0.004 O0.008 Product Description Item:tungsten strips Purity: 99.95%Min. Surface: Sliver grey metal luster. Highly pure tungsten Plates: With good working quality, suitable for rolling . With good working quality,

Brand Name:ZONCO

Model Number:Customized

Place of Origin:Zhuzhou

Tungsten Carbide Plate With Excellent Wear Resistance And Toughness Tungsten carbide plate have excellent high hardness, good wear resistance, high modulus of elasticity, high compressive strength, good chemical stability (acid, alkali, high temperature oxidation), low impact toughness, low expansion coefficient and thermal conductivity. Products show Common Alloy Grades, Ghysical Mechanical Properties And Recommended Application Grade WC% Co/Ni

Brand Name:PRM

Model Number:custom

Place of Origin:China

Golf Club Counter Weight Putter Counter Weight Copper Tungsten Metal Alloy 1. Golf Club Counter Weight Putter Counter Weight Copper Tungsten Metal Alloy Information: Tungsten copper alloys are used in applications where a combination of high heat ...

Brand Name:TOBO/TPCO/TISCO/VALIN/METAL

Model Number:ASTM B424/ASME SB424,ASTM B906/ASME SB906

Place of Origin:China/Japan/Germany

...) Plate : 1)Size:1000mm x 2000mm 2)Thk:1mm-60mm 3)Standard:ASTM B424/ASME SB424,ASTM B906/ASME SB906 Incoloy 825 Chemical composition: Alloy % Ni Cr Fe C Mn Si Cu Mo Al Ti P S 825 Min. 38 19.5 balance 1.5 2.5

Brand Name:Dongchong

Model Number:3104

Place of Origin:Chongqing ,Dongchong

Free Sample China Factory 3104 Aluminium Alloy Sheet Price per kg Product Description 3000 series aluminium alloy represents 3003, 3A21 mainly. The production process of 3000 series aluminium sheet in China is excellent. 3000 series aluminium bar is mainly...

Brand Name:BOZHONG

Model Number:Nickel Alloy 200 / UNS N02200

...Alloy 200 Trade Name:Nickel 200;UNS N02200;W. Nr. 2.4060, 2.4066 Form ASTM Rod and bar B 160 Plate, sheet and strip B 162, B 906 Seamless pipe and tube B 161, B 829 Welded pipe B 725, B 775 Welded tube B 730, B 751 Welding fitting B 366 Forging B 564 Chemical composition % Ni Fe C Mn Si S Cu...