triangle shaped drill bit bearing insert

Brand Name:JS

Place of Origin:cangzhou, Hebei, China

...Drilling Tool Sliding Bearing Insert Tooth Bit Triangle Bit Is Used In Water Well Or Mining JSBIT tricone bits factory offers all kinds of tricone drill bits. Tricone bits are available in new and used tricone bits , steel tooth and tungsten carbide insert, in sizes from 37/8" to 36", for use in all formations, with any bearing: seal type / air type , tricone bits...

Brand Name:ZhongZuan

Model Number:T-005

Place of Origin:Chongqing,China

8mm Orange Tungsten Carbide Triangular Shank Glass Tile Drill Bit Bits are made of high quality alloy steel and have well-built heavy-duty tungsten carbide tips.Our fashioned carbide-tipped drill bits are most commonly used for glass, ceramics and tiles...

Brand Name:Mirco

Place of Origin:China

Oil Well Water Well Drilling Tri Cone Three-Cone Rock Roller Drill Bits Soft formation TCI bits: The soft formation TCI bits are used to drill low compressive strength, very soft formations. This bit maximized to use of both conical and chisel tungsten ...

Brand Name:ENG

Model Number:1600

Place of Origin:China

... shaped inserts for very hard rock or conically shaped inserts for softer rock. The number of rows of inserts is directly related to the type of application and the size of hole to be drilled. here are also open and sealed bearings available as well as

Brand Name:Tianying

Model Number:IADC725

Place of Origin:Hunan CHINA

... a roller bits. In roller-bit drilling, rock is cut by hard-alloy teeth projecting from rolling cutters, which rotate on the drill-bit bearings. Inturn, the drill bit rotates at a high rate, and presses against the bottom hole with a high axial force. The

Brand Name:MIROC

Model Number:Tricone Drill Bit

Place of Origin:China (Mainland)

...Drill Bit TCI Roller Rock Bits TCI Tricone bits offer a variety of carbide inserts such as spherically shaped inserts for very hard rock or conically shaped inserts for softer rock. The number of rows of inserts is directly related to the type of application and the size of hole to be drilled. There are also open and sealed bearings...

Brand Name:ROSCHEN

Model Number:3 1/2"~26"

Place of Origin:China

...Drill Bit For Rock Excavation Engineering Tricone Drill Bit Features: Sealed journal of oil bearing High drilling efficiency Optimized teeth placement Designable tooth shape and height Designable gauge protection Widely used for oil and natural gas field's drilling Efficient in geological exploitation Tricone Drill Bit Advantage Carbide Insert Teeth Tricone bit...

Brand Name:SOLLROC

Model Number:4"-20" with API thread

Place of Origin:China

...Insert Bits Tricone Roller Drill Bits RocK Roller Bits Product specifications: Tricone bits are available in new and used (re-tip and re-run) steel tooth and tungsten carbide insert, size from 3 3/8”(85.7mm) to 26”(660.4mm) for use in all formations, with any bearing/seal type, and a wide range of additional custom features. Tricone bit, are widely used in mining, oil well, water well, thermal drilling. 1, The bearings...

Brand Name:BJTUFF

Model Number:300-3000mm or as required

Place of Origin:China

...Drilling Core Barrel Parts Single Cone Hard Rock Roller Drill Bits Characteristics: ♥ Cutting Structure : The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit; ♥ Gauge Structure: Multiple gauge protection with gauge trimmers on the heel of cone,tungsten carbide inserts and hard-facing on the shirttail increases gauge holding capability and bearing life. ♥ Bearing...

Brand Name:OHANG TECH

Model Number:118-660.4mm

Place of Origin:CHINA

... Description Product Features SRM (Slide Bearing-Rubber Sealing Milled Teeth) bits can load a higher WOB in normal RPM condition. It applies in different formation from very soft to very hard matched with different cutting structure. ...

Brand Name:Pangolin

Place of Origin:HeBei China

...Insert Three Cone Roller Bits Mining Rock Drill Bits Tungsten Carbide Insert Three Cone Roller Bits Introduction Cutting Structure Part of Tricone bits, both Steel Tooth Bits and TCI Bits are available . Gauge Structure With active cutting gauge protection inserts on bit body, the bit has good gauge protection and up drill capability. Bearing Structure High precision journal bearing...

Brand Name:SANROCK

Model Number:3 7/8- 98mm

Place of Origin:Zhejiang, China

...Drill Bit roller cone drill bit is a critical cutting tool primarily used in rotary drilling applications, especially in oil and gas exploration, mining, and geological surveying. It features multiple conical-shaped rollers, or "cones," mounted on bearings that rotate as the drill string turns. Each cone is equipped with hardened teeth or tungsten carbide inserts...

Brand Name:SUVEC

Model Number:tapered drill button bit

Place of Origin:China

... service life, better powder exhausting and easier bit back, which combine well anti-wear and anti-impact carbide butttons and high-performance steel together. Our Tapered Drill bit products are produced by the most advanced production lines to be the most

Place of Origin:HeBei . China

... carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical shaped inserts are used in all rows to provide cutter durability and long life. IADC WOB(KN/MM) RPM(r/min) Applicable Formations ...

Place of Origin:China

Brand Name:ShiTan

... service Details: 1, Types: pdc drill bit which are used for mining pilling, water well drilling or oil well drilling 2, Model: various kinds and according to the requirements of customers 3, Material: ally steel, tungsten carbide insert 4, Color: can be

Brand Name:SD Seriae PDC Cutters

Model Number:SD1305

Place of Origin:Guilin China

Peach-shaped SD1305: Special PDC cutter for Φ30mm,Φ32mm anchor drill bits SD1305 is a PDC cutter specially developed for Φ30mm, Φ32mm anchor drill bits, and can also take into account Φ28mm anchor drill bit. The diameter of the PDC is 13.3mm, the height...

Place of Origin:China

Brand Name:ShiTan

Model Number:customized

... service Details: 1, Types: pdc drill bit which are used for mining pilling, water well drilling or oil well drilling 2, Model: various kinds and according to the requirements of customers 3, Material: ally steel, tungsten carbide insert 4, Color: can be

Place of Origin:Hebei,China

...Bits For Oil Drilling Platforms And Mining Describe Cutting Structure Part of Tricone bits, both Steel Tooth Bits and TCI Bits are available . Gauge Structure With active cutting gauge protection inserts on bit body, the bit has good gauge protection and up drill capability. Bearing Structure High precision journal bearing. Balls lock the cone.Hardface heard bearing surface. Cone bearing...

Brand Name:FLRT

Model Number:9 5/8" FSG515G

Place of Origin:China

... : 6 5/8 inch API REG PIN Nozzle : three jet (side) nozzles SIZE AVAILABLE From 3 7/8inch to 36inch RECOMMENDED DRILLING PARAMETERS FOR APPLICATION Types & IADC Code 415 435 445 515 525 535 545 615 625 635 WOB KN/mm(Bit Dia.)