touch screen flame test apparatus

Brand Name:SHC

Model Number:SC-LTT

Place of Origin:China

... 1±0.05 N Electrode angle 60° Drip size 45 ~ 50 drops / cm3 Delay electric circuit 2 ± 0.1S (at 0.5A) Test voltage range 0

Brand Name:HongCe

Model Number:NF-2

Place of Origin:China

...Flame Test Apparatus For Fire Hazard Testing - Touch Screen Operation Introduction: The best method for testing electrotechnical products with regard to fire hazard is to duplicate exactly the conditions occurring in practice. In most instances this is not possible. Accordingly, for practical reasons, the testing...

Brand Name:vouch

Model Number:5600

Place of Origin:CHINA

...Flame Test Apparatus For Fire Resistance Test Instrument of Plastic material IEC60695-11-5 Needle Flame Test Apparatus For Electronic components Needle-flame Tester could be applicable to ignition hazard test, combustibility test of electronic industry, home electronic appliance and materials. This tester specifies a needle-flame test to simulate the effect of a small flame...

Brand Name:HTI

Model Number:HTB-066B

Place of Origin:Guangdong,China(Mainland)

...-resistant materials :wall and top material of Camping tentage Standard:CPAI-84:1995 clause 6 Flammability Test Method, Wall and Top Material Specification: Specimen size Wall and top material:90mm×300mm (±3mm) Burning Flame height 38±2mm(adjustable)

Brand Name:PEGO

Model Number:PG-NF

Place of Origin:China

...Flame Test Apparatus Electrical Safety Test Equipment 1. Introduction of Needle Flame Test Apparatus: ZY-2 Needle flame tester is designed according to IEC60695-11-5(IEC60695-2-2). It is applicable to ignition hazard test, combustibility test of electronic industry and home electronic appliance. The equipment specifies a needle-flame test to simulate the effect of a small flame...

Brand Name:Sinuo

Model Number:SN7711

Place of Origin:China

...Flame Test Apparatus Cables and Wires Flame Resistance Test Product information: This flammability test chamber meets the requirements of UL1581 and UL94 flame test. The effects of flames in the early stages of fire on electrical and electronic products are used to assess the degree of fire hazard through simulation techniques. It is mainly used for 1080 VW-1 (vertical-specimen) flame test...

Brand Name:DAXIAN

Model Number:UL 1685

Place of Origin:China

...Test Device Instrument Introduction: The UL 1685 Wire and Cable Flame Test Apparatus is an instrument used to evaluate the ability of a single or bundled cable to inhibit flame propagation under specified conditions, and meets the test requirements of UL 1685, IEEE 383 and IEEE 1202. The flame suppression performance of the cable is evaluated by igniting the specimen with a vertically placed flame...

Brand Name:HAIDA

Model Number:ITEM80

Place of Origin:Guangdong, China (Mainland)

...diameter of 102mm on an experimental platform, place a wire mesh on the round hole, place the battery on the wire mesh screen, install an octagonal aluminum mesh around the sample, and then ignite the burner heats the sample until the battery explodes or

Brand Name:YUYANG

Model Number:YY109

Place of Origin:China

...spread of flame,flame condition of ignition at multiple distances,critical flux,and total heat release value.It can also measure the burning characteristics of vertical specimen.After ...

Brand Name:Sinuo

Model Number:SN773

Place of Origin:China

...arrangement and guidance” Equipment Overview Samples and Restrictions: Lighting equipment, low-voltage apparatus, household appliance, machine tool electric appliance, electrical machine, electric tool, electronic instrument, electrotechnical instrument,

Brand Name:Kinte

Model Number:WH-8903A (ZY-1)

Place of Origin:Guangdong,China (Mainland)

..., etc. may cause a flame, which may then be directed to nearby parts. The needle flame test simulates the internal part of the product. A small flame is generated under fault conditions and the risk of ignition is assessed using simulation techniques.

Brand Name:HOOHA

Place of Origin:China

...spread of flame,flame condition of ignition at multiple distances,critical flux,and total heat release value.It can also measure the burning characteristics of vertical specimen.After ...

Brand Name:KINGPO

220V 50Hz Ф0.9mm Needle Flame Test Apparatus Flowmeter Adjustment Laboratory Testing Equipment IEC60695-11-5 Needle Flame Test Chamber Product information: The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45...

Brand Name:GOLD

Model Number:GD-ASTM D1230

Place of Origin:China

... to textile fabric in under 45 ° combustion, determination of the damaged area and damage length determination of heat or melt number to provide exposure to the flame length.

Brand Name:AI

Model Number:NFT

Place of Origin:CHINA

Needle Flame Test Apparatus by IEC60695-11-5 Introduction Needle Flame Tester is designed according to international standards IEC60695-2-2 and IEC60695-11-5.The instrument applies for lighting, low-voltage electrical equipment, household appliances, ...

Brand Name:LIYI

Model Number:LY-SC

Place of Origin:China

..., GB2423.37-89 (Test L:dust test methods), GB 4208-93 protective casing grade (IP code), GB/T 4942.2-93(protective casing grade of low-voltage apparatus), GB 7000.1-1996, GB 7001-1986(protective casing grade of lamps)

Brand Name:HJ

Model Number:NF-2

Place of Origin:China

... test method – Apparatus, confirmatory test arrangement and guidance. Test sample: It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating materials or other combustible materials. Feature: The

Place of Origin:China

Brand Name:KeRang

... to simulate the effect of a samll flame which may result from fault condition, in order to assess by a simulation technique the fire hazard. Test sample:Lighting, low-voltage electrical appliances, household appliances, machine tool electric appliance,