tms 6000 metallographic specimen cutting machine

Brand Name:TMTeck

Model Number:TMS-6000

Place of Origin:China

Metallographic low-speed cutting machine TMS-6000 Purpose and characteristics of cutting machine The TMS-6000 low-speed precision cutting machine is suitable for precise cutting of various hard materials, especially for the cutting of high-value brittle intraocular lenses. The equipment is equipped with four fixtures, which can position and cut...

Brand Name:iqualitrol

Model Number:iCut-863

... for cutting the cylinder and irregular metallographic specimens, it covers double shell in enclosed structure so as to guarantee absolute security under the sample cutting. iCut-863 has strong cooling system so as to take away the heat produced during

Brand Name:Trojan

Model Number:CT-400

Place of Origin:China

...Metallographic Specimen Cutting Machine Product Description 1. CT-400 vertical metallographic cutting machine has a novel and creative design, its performance can compare with the international similar product(Like Buehler) 2. All use Schneider system, low pressure control, safe and reliable. 3. Electronic brake technology, motor can be stopped immediately, safe enough. 4. Large enclosed cutting...

Brand Name:HUATEC

Model Number:HD-150

Place of Origin:China

Metallographic Specimen Cutting Machine Industrial cutting machine HD-150 HC-150 Metallographic Specimen Cutting Machine HC-150 Cutting Machine can be used to cut non-metallic material, circuit board, semiconductor, super hard material etc. Cutting precision 0.01mm. The machine equipped with many jigs, able to cut samples with irregular shape. It is an ideal precision cutting machine...

Brand Name:iqualitrol

Model Number:Metall-100

.... It can cut cylinder specimens with diameter less than 100mm; cube specimens with height less than 120mm, depth less than 200mm. Self circulation cooling tank can be used to cool specimens during cutting to avoid damage metallographical structures.

Brand Name:Johoyd

Model Number:Q-80Z

Place of Origin:CN

... system, cutting wheel and other parts. This cutting machine can not only cut round workpieces with a diameter of less than 80mm, but also can cut rectangular specimens with a height of 100mm and a depth of 200mm. The machine cools the sample through

Brand Name:SINOWON

Model Number:AC-100A

Place of Origin:DONGGUAN CHINA

...Cutting Styles Metallurgical Specimen Cutting Machine with 400 x 280mm Table AC-100A is suitable for cutting the specimens of metal and rock materials, which facilitates the observation of metallographic and rock structure. Technical Data: Technical Specification AC-100A(# 711-231) Cutting Disc Size 350 x 2.5 x 32mm Cutting Wheel Speed 1000 - 3000r/min With continuous adjusts Cutting Table Size 400 x 280mm(W x L) Cutting...

Brand Name:FAST

Model Number:M-2

Place of Origin:China

...Metallographic Specimen Grinding Machine APPLICATION The machine is a wet polishing machine, it uses different size of metallographic sandpaper to polish the samples of various metals and alloys. In addition to mechanical polishing instead of manual operation to improve the efficiency of sample preparation, the pregrinding machine can completely remove the plastic deformation and surface heating trace produced in the cutting...

Brand Name:ZL

Model Number:ZL-2501

Place of Origin:China

... that the best sample can be cut in a safe state, the machine adopts a fully enclosed double shell structure. There is also an independent door-type safety switch for the safety period. In order to avoid ...

Brand Name:BOTO

Model Number:BT150

Place of Origin:CHINA

... cutting machine can cut circle specimen which diameter is inner 100mm, and can cut rectangle specimen which height is 100mm, depth is inner 200mm. This cutting machine to cool specimen by cooling system, to avoid specimen tissue will be damaged due to

Brand Name:AUTOFOR

Model Number:CX20

Place of Origin:China

...Cutting Machine For Laboratory Metallogrphic Analysis​ CX20 cutting machine is a small high-precision, high-efficiency cutting device, which is suitable for metallographic specimen cutting of various metal and non-metal materials. CX20 cutting machine...

Brand Name:HUATEC

Model Number:HC-350X

Place of Origin:Beijing

Portable Hardness Tester Accessory Metallographic Equipment For Specimen Cutting HC-350X Metallographic Specimen Cutting Machine Product Features The machine adopts closed structure Quick double clamping mechanism Crank control feed, feed speed control, ...

Brand Name:Ai Si Li

Model Number:DQ - 150

Place of Origin:China

...Machine is applies for cutting all kinds of hardness material, specially fit for cutting all kinds of electronic component and high value artificial crystal; this equipment has a lot kinds of clamps, cutting samples in best location with limited switch, it

Place of Origin:China

Brand Name:china coal

... system. Using the liquid coolant will help to bring away the heat produced during the cutting process, thus it can help to prevent burning the structure of specimen due to the overheating of specimen. This machine features easy operation, high safety and

Brand Name:AISRY

Model Number:ASR-7109

Place of Origin:China

...specimen 540mm by 20 or 50mm in dimension from the sample being tested into the wheel of Velcro tester to be fitted completely. To subject Velcro (hook & loop) to repeated stripping and peeling for a certain number of times. Use tensile machine (another

Brand Name:ZhongYue

Model Number:OEM

Place of Origin:China

...Cutting Head forming Heat treatment Surface treatment Final inspection Packing Shippment. Inspection machine Brinell Hardness Tester Carbon and Sulfur Analyzer Rockwell Hardness Machine Automatic Impact Testing Machine Metallographic Microscope Automatic High-speed Analyzer Fatigue Testing Machine Metallographic Specimen Polishing Machine...