three 50n mandrel test device

Brand Name:HongCe

Model Number:HX9804

Place of Origin:China

... forming REINFORCED INSULATION , are used. One sample at a time is fixed to the mandrel of the test fixture (Figure AA.1) as shown in Figure AA.2. A downward force of 150 N ± 10 N is applied to the free end of the sample (see Figure ...

Brand Name:kingpo

Model Number:KP-1601

Place of Origin:china

... Application: Insulation anti damage strength verification for non separable thin layer materials. Test sample: Non separable thin layer material. Feature: The position of 10°and 230°are set with mechanical limit, not only to ensure the accuracy of

Brand Name:KINGPO

Place of Origin:Mainland China

...Mandrel Test Equipment For Insulation Material IEC 61558-1 Mandrel Test Equipment For Insulation Material Mandrel Test Device Description: This device is used to test the Insulation anti damage strength verification for non separable thin layer materials. Confirm to IEC60950 Safety of information technology equipment, IEC60065-1 Audio, video and similar electronic apparatus-Safety requirements, IEC 61558-1. Test...

Brand Name:Pego Tester

Model Number:PG-MTD

Place of Origin:China

...Mandrel Test Equipment for Insulation Film Mandrel / Mechanical Strength and Abrasion Test 1. Introduction of Mandrel Test Equipment Mandrel Test Equipment is designed according to IEC61588 figure 6, IEC60950 annex A, IEC60065 and GB1921. It is used for the insulating thin layer of the power transformer and supply unit as well as the similar products to do the spindle test, mechanical strength test and abrasion test. This test device

Place of Origin:China

Brand Name:KeRang

...n layer material. Feature:The position of 10°and 230°are set with mechanical limit,not only to ensure the accuracy of the test angle, but also to achieve a simple operation method; weight with a hanging ring, in case of a point is damaged because of too

Brand Name:DAXIAN

Model Number:DX8403

Place of Origin:China

... or round insulated cores at low temperature. The manual low-temperature impact test device is used to measure the samples of wire and cable insulation and jacket, plugs and sockets, insulating electrical sleeves and accessories for construction. After

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

Product Description Complies with IEC61032 Figure 7 Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing...

Brand Name:HJ

Model Number:HX9804

Place of Origin:China

Mandrel Test Device IEC Test Equipment 150N Test Force Manual Control Standard: IEC 61558-1 ‘Safety of transformers, reactors, power supply units and combinations thereof – Part 1: General requirements and tests’ clause 26.3.4; IEC 60065-1 ‘Audio, ...

Brand Name:BAXIT

Model Number:GLO-101

Place of Origin:CHINA

...designed to test the opening and closing torque of various caps. It is mainly used to test the opening and closing torque and correction tightening force of various caps, lamp holders, etc., and the torsional destructive test of parts. The instrument has a

Brand Name:Sinuo

Model Number:SN2210-22

Place of Origin:China

...is used to test non-detachable parts that protect against access to live parts, moisture or contact with moving parts shall be fixed in a reliable manner and withstand the mechanical stress occurring during normal use. Snap-in devices used for fixing such

Brand Name:AI

Model Number:AIC21149

Place of Origin:China

...test of wires, cables, terminals etc. Standards: • GBT 25085-2010 Technical parameters: • Max test force: 50N, 100N (optional for users) • Stroke: about 300mm • Speed: 50 ~ 250mm/min, settable • Relative error of test force indicating value: ≤±1% • Power system: AC rate regulating motor • Safety device...

Brand Name:SHC

Model Number:SC-F711

Place of Origin:China

IEC61032 Fig7 Device 11​ Rigid Finger Probe Test Finger Probe Main specification and corresponding technical parameters: Parameters /Model SC-F711-F1 SC-F711-F2 SC-F711-F3 Name Test finger Test finger with 50N force Test finger with 75N force 1 20 0 -0.05 ...

Brand Name:Lonroy

Model Number:BGD 564

Place of Origin:China

BGD 564 ISO 1519 Cylindrical Mandrel Tester Paint Film Bending Device 1.Description:Designed in accordance with the requirements of "Type II" instruments in the latest standard GB/T 6742-2007 and ISO 1519:2002, it is used to evaluate the crack ...

Brand Name:XIWUER

Model Number:CDX-S-27kV-P8.5-LD

Place of Origin:XIAN, CHINA

...mandrel capacitor customized 27KV charged display device insulator capacitor from factory Technical Parameter 1. Capacitance: 85±3pF 2.Operating Temperature: -40°C ~ 65°C 3. Accuracy: ± 1,2% in the Temperature range 4. Dielectric Performance in an Insulated Environment: 50Hz 65kVac / 1 min (In oil) 5.Partial Discharge: 18kV< 3 pC,extinguish > 25kV (In oil) 6. Impulse withstanding test...

Brand Name:Haida

Model Number:8038-HD

Place of Origin:China

... mandrel in the syringe barrel, which plays an important role in the medical device industry. Test Standard: GB15810-2019: ISO 7886 Technical Parameters Model 8038-HD Test Standard GB15810-2019: ISO 7886 Test item Sliding performance test of sterile ...

Brand Name:HAIDA

Model Number:8038-HD

Place of Origin:Guangdong, China (Mainland)

... mandrel in the syringe barrel, which plays an important role in the medical device industry. Test Standard: GB15810-2019: ISO 7886 Technical Parameters Model 8038-HD Test Standard GB15810-2019: ISO 7886 Test item Sliding performance test of sterile ...

Brand Name:HUST Tony

Model Number:TW-220

Place of Origin:Guangdong,China(Mainland)

... PTFE tape(to simulate human skin) is attached to a mandrel, which is then rotated for a single 360-degree revolution along the accessible edge being tested. If the tape is cut in half or longer in length (approx. 13 mm), the edge is identified as a