test probe b of iec 61032

Model Number:TP04

2.5mm rod test probe,test probe D iec 61032,test finger probe,test probe IEC 529 IP4X code for impact and access testing Model TP04 2.5mm rod test probe,tes probe Dviec 61032 Test Probe is intended to verify the protection of person aganist access to to ...

Brand Name:HongCe

Model Number:HT-I02

Place of Origin:China

... – Part 1: General requirements clause 8.1.1, 8.2, 22.1, 29.1, 29.2 and ect.; IEC 61032 Protection of persons and equipment by enclosures –Probes for verification Application of Test Probe B of IEC 61032: Appliances shall be constructed and enclosed so

Brand Name:KingPo

Model Number:IEC60335-1- clause 20.2.

Place of Origin:China

... 2.Knurled Finger Length:80mm 3.Baffle Plate Diameter:50mm 4.Baffle Plate Length:100mm 5.M6 thread at the end of the probe(can be connected to the push-pull gauge) Packaging and Shipping 1.

Place of Origin:China

Brand Name:Julixing

Model Number:LX-1AT

... and UL 2, IP1X Probe A (Test Probe A) is necessary appliance for household and similar electrical appliance of against electric shock protection test. Technical Parameters: 1. Ball Diameter: 50mm 2. Total Length: 210mm 3. Baffle Plate Diameter: 45mm 4.

Brand Name:PEGO

Model Number:PG-TPB

Place of Origin:China

...IEC 61032 Test Probe B equipped with 42V Electrical Indicator 1. Introduction of IEC61032 Test Probe B: Test probe B ( jointed test finger) is design according to IEC61032 figure 2, meet the requirements of UL507, UL1278 figure 8 and EN60529 figure 2. Test probe B with 50N force is for IP2X testing, it means for the protection of person’s finger from hazard parts. 2. Specification of IEC61032 Test Probe...

Brand Name:SHC

Model Number:SC-F2B-F

Place of Origin:China

IEC60529 IP2X Test Probe B Test Finger Shell Anti Electric Shock​ Specification and technical parameters: Parameters /Model SC-F2B SC-F2B -A SC-F2B -B SC-F2B-F Name Standard test finger Circular baffle test finger Large baffle test finger Standard test ...

Brand Name:KingPo

Place of Origin:China

...Test Finger Probe B Of IEC 61032 Figure 2 IEC 61032 Figure 2 IEC60950 Figure 2A Test Finger Probe B Product Details Standard: IEC 61032 figure 2, IEC60950 figure 2A, IEC60884, IEC60335, UL507, and UL1278 figure 8.4. Application: This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. Test...

Brand Name:Sinuo

Model Number:SN2210-12

Place of Origin:China

Test Probe 18 Ф8.6mm Small Finger Probe For Simulate Children Finger IEC 61032 Figure 12 Product Overview: This probe conforms to the standard requirements of IEC 61032 figure 12 test probe 18, IEC 60065:2014 clause 9.1.1.3, etc. This probe is intended to simulate access to hazardous parts by children of more than 36 months and less than 14 years. Features: IEC 61032 Figure 12 Test Probe 18, also known as Test Probe B or "Cylindrical Rigid Test

Brand Name:HeJin

Model Number:HT-I09

Place of Origin:China

...Test Finger Probe Figure 9 Test Probe 13 With 15mm Length Metal Pin Standard: IEC 61032 ‘Protection of persons and equipment by enclosures – Probes for verification’ figure 9 test probe 13. IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ IEC 60950-1 ‘Information technology equipment – Safety – Part 1: General requirements’ figure 2B. Application: Other access probes...

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

...Test Finger is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts.The Rigid Test Finger was made on stainless steel and Polyamide handle. Applicatiopn 1.The joint part of The Standard Test

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

...Test Probe EVSE Testing Equipment Equipment Overview This is a precision test finger made in accordance the requirements of IEC 61032 test probe, required by many standard such as IEC 61851-1 clause 8 and 12.4, IEC 60529 IP2, etc. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test...

Brand Name:szcx

Model Number:CX-T4D

Place of Origin:china

...IEC 61032:1997 / IEC 60529:2001 / IEC 60065 / IEC 60598 and UL 2. IP4X Test Probe D ( Test Probe D) is the necessary tool to proceed protecting electric shock test of household and similar electrical appliances. Technical parameters: 1. Wire length: 100 mm 2. Wire diameter: 1.0 mm 3. Circular-baffle diameter: 35 mm 4. Handle diameter: 10 mm 5. Handle length: 100 mm 6. According to IEC 61032 figure 4 (the Test

Place of Origin:China

Brand Name:BONAD

Model Number:BND-12

...parameters 1, The probe Diameter :4mm 2, The probe Length:50mm 3,Dam- board Diameter:25mm 4, Dam- board Length:4mm 5,Reference Standard: IEC61032:1997 in figure 8 Appliance: The long test pin meets to the standard requirements of IEC 61032 &GB 16842, it is

Brand Name:kerang

Model Number:HT-I02

Place of Origin:CHINA

... parts. It is also used to verify the protection against access with a finger. Test sample: Easily accessible enclosure live parts or mechanical parts. Feature: This test finger probe consists of dito, finger, base and insulated handle which simulates the