tanker hull

Brand Name:Zhiyou

Model Number:ZY-R005

Place of Origin:Shanghai China

...Marine M Type Rubber Fenders For Tankers And Bulk Carriers Marine M Type Rubber Fenders are used for pushing a large flat contact face for very low hull pressures – useful when working with soft hulled ships such as tankers and bulk carriers. The grooved...

Brand Name:Henger

Model Number:PRF-1

Place of Origin:China

...hull. 1. Yokohama Type Rubber Fender The Yokohama type pneumatic fender is a bumper with air as bumping media. Impact energy is absorbed by compressed air so that the ship can berth softly to protect the ship from bumping. The rubber fender is widely used for oil tankers...

Brand Name:Shunhang

Model Number:SH-PF6

Place of Origin:China

...gas tankers 2. Fast ferries and aluminum vessels 3. Temporary and permanent installations 4. Rapid response and emergencies 5. In ports with extreme tidal variations 6. For ship-to-ship lightering operations 7. For all navy vessels due to low hull pressure...

Brand Name:Magicart

Model Number:F/FR

Place of Origin:Henan, China

... in excess of 30% depending on if the installation is a retrofit or combined with a fully optimised newbuild hull. Initially aimed at bulk carriers and tankers, further variations will be developed for other large ship types Drawing and Specification

Brand Name:MITTEL

Model Number:EH36

Place of Origin:China

.../40, DH32/36/40, and EH32/36/40 which ranged from different strength. The plates usually used to manufacture ship hulls, bulkheads, upper decks and hatch covers for tankers, bulk carriers, container

Brand Name:Florescence RUBBER

Model Number:Florescence Pneumatic Fender 106

Place of Origin:Qingdao, China

... for small and large tidal ranges 4.Lower maintenance cost Application 1. Oil and gas tankers 2.Fast ferries and aluminium vessels 3.LPG vessels, ocean platforms, large docks 4.Harbors and wharf Net-type fenders are ...

Brand Name:HAOZHIYUE

Model Number:HZY-50

Place of Origin:China

...known as the Yokohama fender. Tankers’ Ship-to-ship (STS) operations mostly uses this type of self-floating, long useful life fender. Industry-wide known as pneumatic fenders. Feature 1.Easy to install and maintain 2.Low reaction and hull pressure 3.More

Brand Name:OEM/ODM

Model Number:DSQ, S275JR, IS 2041 R260, Q245 R, AH 36, DH36, EH36

Place of Origin:Mainland,China

... strength is 355MPa, while its ultimate tensile strength is 490-620MPa. Manufacturers commonly utilize this type of steel to construct the hulls and superstructures of large container ships, bulk carriers, oil tankers, and other commercial vessels that