stringing splice protection sleeves

Brand Name:Lingkai

Model Number:J240B J400B J630B J1000B

Place of Origin:NINGBO CHINA

... stringing operation. Application: Designed to protect the compression sleeve joints for ACSR conductor in line stringing operation, and make them pass through stringing blocks safely. The product is made of high strength steel and good quality rubber, to

Place of Origin:Ningbo

Brand Name:Newart

Model Number:JW800B

Splice Protection Sleeve Splicing Sleeves for Steel Strand Introduction Apply to protecting the ground wire pressure tube on steel strand releasing and make it avoid torsion when pass throuth pulleys.If the size of crimp tube is different from the standard, the dimension of splicing sleeve should be indicated in the contract. Notes Please writing the dimension of splice in contact if the splicing sleeve...

Brand Name:XINYA

Model Number:-

Place of Origin:MADE IN CHINA

...ing conductor stringing operation.The cover joints consist of two shellsmade of steel with shaped endds to house the rubber noses which protect the mid span joint during the passage over the pulleys.The shells are coupled together by socket screws and the

Brand Name:XXR

Model Number:OFSS-40M

Place of Origin:China

...Splice Protection Sleeve With Polished Steel Needle And Burr Free Definition: Optical fiber heat-shrinkable tube, commonly known as optical fiber connector, scientific name: optical fiber connection heat-shrinkable protection tube, or optical fiber fusion protection heat-shrinkable tube, is an optical fiber connection protection...

Brand Name:Net Electric Power

Place of Origin:China

...Splice Protection Sleeves Fibre Splice Protectors In the electrical field, when performing the splicing operation of wires and cables, Splicing Sleeve Protector is an indispensable protective equipment. It tightly wraps the splicing sleeve to prevent it from being damaged by external physical factors. For example, in outdoor wire splicing, it may face wind, sun, rain, and possible human collision. This protective sleeve...

Brand Name:ANC

Model Number:Heat-shrinkable Sleeve

Place of Origin:China

... intends to protect (mechanically) fiber optic splices. The protection sleeve is built from shrinkable plastic tube with metal cylinder inside. The fibers are inserted before splicing into the plastic tube. After making the splice, the shrinkable tube is

Brand Name:SHENGHON

Model Number:J400B

Place of Origin:MADE IN CHINA

Splice Protection Sleeve Splicing Sleeves for ACSR Conductor Introduction Apply to protecting wire pressure tube on ACSR releasing and make it avoid torsion when pass through pulleys. If the size of crimp tube is different from the standard, the dimension of splicing sleeve should be indicated in the contract. Notes Please writing the dimension of splice in contact if the splicing sleeve...

Brand Name:Hanxin or OEM

Model Number:60611202

Place of Origin:Shenzhen ,China

... Steel Rod which keep optic transmission properties of optical fiber and enhance the protection to optical fiber splices. Easily operating to the optical fiber during installation without damaging and clear sleeve make it easy to detect splice before

Brand Name:ZGT

Model Number:single fiber

Place of Origin:SHENZHEN,CHINA

Fiber Optic Splice protect Sleeve For Single Fiber With Strength Member You are here: Home > Products > Fiber optic splice protector Serial Number: single fiber Quick Detail: Fiber optic Splice Protector in different length, such as 30mm, 40mm ,45mm 60mm...

Brand Name:OMC or OEM

Model Number:shrink fiber splice sleeve

Place of Origin:China

...Splice Protector FTTH Products Fiber Fusion Splice Protection Sleeve FTTH 60mm Heat Shrink Splice Protector Fiber Fusion Splice Protection Sleeve Special designed cross-linked Clear Heat Shrinkable tubing, with Clear fusion tubing liner, providing strength member and protection to fiber optical splices...

Brand Name:Geehe,OEM

Model Number:GC-60MM-1.5MM

Place of Origin:Wuhan,China

...Splice Protection Sleeve-Single Fibre Fusion-Protection Sleeves It Consists of cross linked polyolefin, Hot fusion tubing and Stainless Reinforcing Steel Rod which keep optic transmission properties of optical fiber and enhance the protection to optical fiber splices. Easily operating to the optical fiber during installation without damaging and clear sleeve make it easy to detect splice...

Brand Name:JQ/OEM

Model Number:Fiber Heat Shrink tube

Place of Origin:Guangzhou,China

60mm Optical Fiber Heat Shrinkable Splice Protection Sleeves Shrinkable sleeve is applied to the optical fiber closure to fix and protect the optical fiber when splicing. The sleeve can be divided into two types(single and mass) according to the function...

Brand Name:TAKFLY

Model Number:Fiber Optic Fusion Splicing Tube

Place of Origin:Shenzhen, China

Fiber Optic Fusion Splice Protection Sleeve for 40mm/45mm/60mm Fiber Optic Fusion Splice Protection Sleeve - Characteristics: Single holed (pre-shrunk) Clear sleeve design Smooth stainless steel reinforcing member Sealing structure suitable to temperature ...

Brand Name:KNOFC or OEM

Model Number:Fusion Splice Protection Sleeves

Place of Origin:China

...n splicing consist of cross linked polyolefin, Hot fusion tubing and Stainless Reinforcing Steel Rod which keep optic transmission properties of optical fiber and enhance the protection to optical fiber splices. Easily operating to the optical fiber during

Model Number:Fiber Optic Heat Shrink Tube 60/45 X3.0mm

Place of Origin:China

Fiber Optic Fusion Splice Protection Sleeve Fiber Optic Heat Shrink Tube 60/45 X3.0mm 40mm 45mm 60mm Fiber Optic Cable Fusion Splice Protection Sleeve Fiber Optic Heat Shrink Tube Description: 1.Continue operating Temperature:-45°C~125°C; 2.Shrink ...

Brand Name:KEXINT

Model Number:KXT-H01

Place of Origin:CHINA

... fiber optic cable protective box is a case to put in a butterfly cable with a thermal protection tube after hot melting, so that the splice spot can get a better protection.Relative to the cold welding, the hot one can improve the optical performance of

Place of Origin:China

Brand Name:DONGWE

...Protection Sleeves Condition: New Tube Length: 35~60mm Standard Color: Clear Operating Temperature: -45℃ ~ +110℃ Shrinking Temperature Range: 120 °C Stainless Steel Needles Diameter: 1.0mm 1.2mm 1.4mm 1.5mm Packaging & Delivery Packaging Details: 5pcs, 10pcs, 20pcs//package, In Carton Box Delivery Details: 3-7 working days Fiber optic fusion splice protective sleeve

Brand Name:kelong

Place of Origin:china

Heat Shinkable Tube Fiber Splice Protection Sleeves For Fiber Optic PLC Splitter Hangzhou Fuyang Kelong Telecom Equipment Co.,Ltd is a high-tech manufacture of fiber optic connectivity ...

Place of Origin:Shenzhen（China）

Brand Name:DYS/OEM

Model Number:Single Splice Sleeve

Waterproof Fiber Optic Splice Sleeves , Single Splice Protector 1 Core Quick Details: Brand Name: DYS Model Number: Heat-shrinkable Type:Double :Waterproof Length: 60mm Steel ...