st upc variable fiber optic attenuator

Brand Name:CY/OEM

Place of Origin:Hubei

Model Number:ST Attenuator

...: Guangdong, China (Mainland) Brand Name: CY/OEM Model Number: ST Connector Type: ST Return Loss: > 55dB (UPC) ≥ 65dB (APC) Operational Temperature: -40 To+ 75℃ Attenuation Tolerance: 1 To 10dB ± 0.5dB;11 To 30dB ±5%dB Operation Wavelength: 1260 To

Brand Name:Haiyu Optical

Model Number:HYG-ATU-SC-009

Place of Origin:China

....5/125 applications. Our Male to Female Buildout Optical Attenuation are available in all fiber modes with LC, LC/APC SC, SC/APC, FC, FC/APC and ST types. The SC Air-Gap Variable Attenuator has a ceramic alignment sleeve. Can be used on both multimode and

Brand Name:Geehe or OEM

Model Number:Optical Pad Attenuator

Place of Origin:Wuhan, China

...UPC Variable Fiber Optic Attenuator 1310 / 1550 Nm Detailed Product Description Material: Attenuation Fiber Connector Type: LC, SC, FC Interface Polish: APC/UPC Attenuation Value: 1-30 DB Product Description Optical pad attenuators are built with metal-ion doped optical fiber and are designed to provide consistent attenuation levels as well as maintaining polarization characteristics. Typical application for an optical...

Brand Name:GEEHE

Model Number:GH-AT-SM-001

Place of Origin:Hubei,China

... attenuation values are available in 1dB increments from 1 to 20dB. This Fixed Optic Attenuator 10 dB (Low Polarization FC APC) is a passive device mainly used to reduce the amplitude of a light signal without any significant ...

Brand Name:Gapho

Model Number:ST-UPC Optical Fiber Attenuator

Place of Origin:China

... levels as well as maintaining polarization characteristics. Typical application for an optical pad attenuator is to reduce the amount of optical power by a specific amount as to not saturate a receiver which can limit a system's performance. They

Brand Name:UNIFIBER-OEM

Model Number:Variable Fiber Optic VOA In-Line Attenuator

Place of Origin:CHINA

...UPC Variable Fiber Optic VOA In-Line Attenuator 0~60dB As optical passive devices, Fiber Optic VOA In-Line Attenuator are mainly used in fiber optic to debug optical power performance & optical instrument calibration correction & fiber signal attenuation to ensure the optical power in a stable and desired level in the link without any changes on its original transmission wave. Key Features High Precise attenuation...

Brand Name:J&K

Model Number:ST/UPC Attenuator

Place of Origin:SHENZHEN,CHINA

...ST UPC female-male fiber optic attenuator Features Complied with Telcordia (GR-910-CORE and GR-1221-CORE). Visual Tested with 800X magnification: Three Times (After Polishing, Before Assembly, Before Delivery) 100% Geometrical Inspection: Radius(10-25mm/PC), Offset(0-50um), Fiber Height(+/-50nm) High Optical Power Endurance: up to 1000mW (=1W) High Reliability: Specified for Over 500 mating Applications Fiber Optic

Place of Origin:China

Brand Name:CY

Model Number:15dB ST/UPC

Low back reflection and Low PDL Fixed type (female to female) Fiber Optic Attenuator Fixed type (female to female) optical attenuator Fiber Optic Attenuator is a component installed in a fiber optic transmission system that reduces the power in the optical...

Place of Origin:Ningbo

Model Number:ST/UPC Plug fiber optic Attenuator

...Optical Communication EDFA (Erbium-Doped Fiber Amplifier) Features: Work wavelength: 1250-1620nm Return Loss: ≥55 dB (UPC) or ≥60 dB (APC) Attenuation accuracy: +-0.5dB (under 10 dB); +-10% (over 10 dB) Attenuation value: 1dB-10dB(1dB step), 15, 20, 25, 30 dB,etc FC, SC, ST...

Model Number:FKATT-013

Place of Origin:China

Brand Name:FONGKO

#detail_decorate_root .magic-0{border-bottom-style:solid;border-bottom-color:#53647a;font-family:Roboto;font-size:24px;color:#53647a;font-style:normal;border-bottom-width:2px;padding-top:8px;padding-bottom:4px}#detail_decorate_root .magic-1{vertical-align...

Brand Name:FOCC

Model Number:FOCC-ATT001

Place of Origin:China

...UPC 20dB Fiber Optic Attenuator ST Male To Female Metal Housing This Fiber Optic Attenuator, Fixed - ST/UPC 20dB is necessary to prevent over saturating an optical receiver when the optical power is too high. Using attenuators will ensure low bit error rates and prevent damage to receiving components. ST...

Brand Name:KEXINT

Model Number:LC/UPC Singlemode Fixed Fiber Optical Attenuator

Place of Origin:CHINA

...Variable Fiber Optic Attenuator LC UPC 3 25 Db Telecom CATV Product introduction Attenuator optic attenuator is a precise device that can provide different attenuation for needing.They are used in the transmit line of fiber.There are two kinds of attenuator,alterable and fixable .The attenuation form 1dB to 65dB. Optic attenuator is a precise device that provide the attenuation...

Brand Name:FURONG

Model Number:Fiber Optic Attenuator

Place of Origin:Guangdong, China

...: 1dB~30dB Operating Wavelength: 1310nm, 1550nm, 850nm, 1300nm PC, UPC, and APC polish types optional Description: Fiber Optic Attenuator is used in a wide variety of applications and can satisfy almost any requirement where a reduction in power is needed.

Brand Name:YINGDA

Model Number:ATTN-SC/ST S-MVOA-01

Place of Origin:china

...receiver sensitivity, usually place in the optical receiver input to adjust receiving light power. It is in the middle of fiber connector, suitable for all kinds of fibre optic connector with all high performance of connectors. When use optical attenuator,

Place of Origin:Guangdong, China

Brand Name:TTI

Model Number:FC

...ST MU Fixed Fiber Optic Attenuator for Fiber Optic CATV Quick Detail: Name: Fixed Fiber optic attenuator PC, UPC, and APC polish types optional attenuation fiber inside SC,LC,FC,ST,MU Optional Mode: Singlemode, Multimode Operating Wavelength: 1310nm, 1550nm, 850nm, 1300nm Description: Attenuators...

Brand Name:CFO

Model Number:fiber optic attenuator

Place of Origin:China

...Variable Fiber Optic Attenuator 5dB Singlemode / Multimode Female To Male Type Fiber Optic Attenuator is used in a wide variety of applications and can satisfy almost any requirement where a reduction in power is needed. 1. Features: Fixed Attenuator(Fixed Type FC, SC, ST, LC) Female to male type ( FC, SC, ST, LC) In-Line Attenuator(Fused and Fiber Jumpers Type) High Return Loss(In-Line and High RL Type) Exact and Stable Attenuation

Brand Name:TTI/OEM/ODM

Model Number:FC-FC

Place of Origin:China

... FC,SC,ST,MU,LC,MTRJ,MPO Low Splicing Loss Insertion Loss Single Mode PC≤0.3dB,UPC≤0.2dB,APC≤0.2dB Multi-mode PC≤0.3dB Hybrid Adapter ≤0.3dB Female & Male Adapter ≤0.4dB(Both Ends) ...

Brand Name:CY COM

Model Number:ST

Place of Origin:Shenzhen China

... to reduce the power level of an optical signal. It could be applied to debug optical power performance & optical instrument calibration correction & fiber signal attenuation to ensure the optical power in a stable and desired level in the link without any

Brand Name:Gezhi or OEM

Model Number:Male And Female Attenuator

Place of Origin:China

...UPC Online Inline VOA Variable Fiber Optic Attenuator Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver. Optical attenuator...

Brand Name:Wangtong

Model Number:Variable Fiber Optic Attenuator

Place of Origin:Guangdong, China (Mainland)

...Variable Fiber Optic Attenuator SC APC 2db 5 db 10db 15 db db 20 Description Fiber Optic Attenuator is used in a wide variety of applications and can satisfy almost any requirement where a reduction in power is needed. We supply various kinds of fiber attenuators, including LC, SC, and ST, FC and Variable fiber optic attenuators. Feature Precise attenuation values Industry standard attenuation...