spread of flame test

Brand Name:GOLD

Model Number:GD-BS476-7

Place of Origin:China

... surface of the specimen of a product oriented in the vertical position under opposed flow conditions, and a classification system based on the rate and extent of the spread of flame. It provides data suitable for comparing the end-use performances of

Brand Name:HOOHA

Place of Origin:China

...spread of flame,flame condition of ignition at multiple distances,critical flux,and total heat release value.It can also measure the burning characteristics of vertical specimen.After ...

Brand Name:HTI

Model Number:HTB-025

Place of Origin:Guangdong,China(Mainland)

Electronic Spread of Flame Testing Equipment Standards ISO 5658-2 ASTM E 1321 Description: It’s suitable to evaluate burning characteristics of construction materials and measure the spread of flame,flame condition of ignition at multiple distances,...

Brand Name:AI

Model Number:PSS

Place of Origin:CHINA

...the vertical position under opposed flow conditions, and a classification system based on the rate and extent of the spread of flame. It provides data suitable for comparing the end-use performances of essentially flat materials, composites or assemblies,

Brand Name:vouch

Model Number:5340

Place of Origin:CHINA

...Flame Test Chamber of Textile products MODEL:5330 It is mainly used for the determination of flame retardant performance of clothing fabric, decorative fabric, tent fabric, rubber, plastic, curtain, building material and other materials with flame retardant requirements.It is also used for the determination of flame...

Brand Name:DAXIAN

Model Number:DX8299

Place of Origin:China

... the transverse flame propagation performance of building products, flame propagation performance/flame spread speed can evaluate the fire retardant performance of materials. 2. BS476-7 Flame Spreading Tester meet the standards BS476-7: Test method for

Brand Name:YUYANG

Model Number:YY411

Place of Origin:China

... specimen. Following ignition, any flame front which develops is noted and a record is made of the progression of the flame front horizontally along the length of the specimen in terms of the time it takes to travel to various distances. The results are

Brand Name:Delta

Model Number:IMO

Place of Origin:China

...Spread of Flame Tester Introduction: IMO Imo Resolution Spread of Flame Tester is used to evaluate combustion characteristics of building materials and ship materials and measures spread rate of flame, flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release. This test method is originated from ISO 5658-2 (Reaction to fire tests–Spread of flame...

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

... Surface Flame Spread Tester stands as a crucial instrument. It is designed to meticulously analyze and understand how flames travel across the surfaces of building materials and structures, providing essential insights that are vital for architects,

Brand Name:HongCe

Model Number:HVF-3

Place of Origin:China

...essential flammability test equipment intended to determine the burning rating of plastic materials used for parts in devices and appliances under specified conditions. It can help users grasp the tendency of materials to extinguish or spread after being

Brand Name:Sinuo

Model Number:SN7711

Place of Origin:China

.... Equipment Overview Applications Wires & Cables: Test flame spread resistance for UL certification. Electronics: Evaluate fire hazards in connectors and insulation materials. Automotive: Ensure compliance for wiring harnesses and ...

Brand Name:YUYANG

Model Number:YYC007

Place of Origin:China

...Testing Machine Descriptions: Applicable to the British building materials and high iron flame retardant test standard, conform to the standards , the method of the test to determine the classification of the surface spread of flame of products. BS 476-7 is mainly used for the determination of the extension of the flame which on the exposed surface of the wall and ceiling. The test

Brand Name:SKYLINE

Model Number:SL-7603B

Place of Origin:China

Single Insulated Wire and Cable Vertical Flame Test Equipment Application Applies to check thesingle insulation wire and cable vertical spreading test which total section area less than 0.5mm2. Standards According to IEC60332-1-1:2004, IEC60332-1-2:2004, ...

Brand Name:Kinte

Model Number:Ul-1581 Vw-1

Place of Origin:Guangdong,China (Mainland)

Electric Wire Flame Test Chamber 1000Ml / M Flow Range For Finished Wire / Cord​ Scope: applicable to finished wire or cord in the specified conditions to inhibit the spread of flame has the ability, and its use of the cable: that is, power, ...

Brand Name:kingpo

Model Number:K6116

Place of Origin:china

...Flame Test Vertical Flame And FT1 Test UL 1581​ 1, Compliance: This combustion cabinet is produced in strict accordance with IEC60332 ul1581 sect 1080.1 ~ 1080.14 and fully complies with VW-1 (vertical specimen) flame test combustion test. It is applicable to VW-1 of ul1581, UL13, ul444 and ul1655 and FT-1 and ft-2 of CSA. And a large number of wires and cables are widely used in the industry. 2, Design principle: The whole test...

Brand Name:GC

Model Number:GC-ZY-A

Place of Origin:China

Needle Flame Test Apparatus Model: GC-ZY-A A. Product Introduction The needle flame test machine is suitable for simulating small flames generated inside the product under fault conditions in electronic and electrical products, and uses simulation ...

Brand Name:HJ

Model Number:NF-2

Place of Origin:China

Flame Test Chamber Needle-Flame Test Apparatus PLC Control 4mm Coper Block Standard: IEC 60695-11-5 Fire hazard testing – Part 11 -5: Test flames – Needle-flame test method – Apparatus, confirmatory test arrangement and guidance. Application: The Needle-Flame Test Apparatus to simulate the effect of a small flame...

Brand Name:Sinuo

Model Number:SN773

Place of Origin:China

... electrical equipment. The burner which produces the 12 mm high test flame shall consist of a tube at least 35 mm long with a bore of 0.5mm±0.1mm and outer diameter not exceeding 0.9mm. The burner is supplied with ...

Brand Name:PEGO

Model Number:ZY-2

Place of Origin:China

...Flame Tester with ISO17025 authorized Third-lab Calibration Certificate 1. Introduction Needle flame tester is made as per IEC60695-11-5 testing - Part 11-5 Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance>. The equipment specifies a needle-flame test to simulate the effect of a small flame...

Brand Name:Haida

Model Number:6011-HD

Place of Origin:China

...Flame Testing Instrument Product Description This instrument simulates small flames generated under fault conditions (e.g., leakage currents, component overheating, poor contacts) to assess fire hazards. Needle Flame Testing Instrument is specifically designed for evaluating fire risks in small components where glow-wire or horizontal/vertical flame tests are unsuitable. If a sample ignites during glow-wire testing, the needle flame test