splash water test chamber

Brand Name:LIB

Model Number:R-800C

Place of Origin:China

...Splash Water Test Chamber Water Spray Test Equipment ►Applicaton for Waterproof IPX2 Rain Splash Water Test Chamber Water Spray Test Equipment Waterproof Ipx2 Rain Splash Water Test Chamber Water Spray Test Equipment simulates the watet drip environment to test the water...

Brand Name:kingpo

Model Number:KP-1023

Place of Origin:china

... shock testing caused by ice water. The purpose is to simulate the splashing of ice water into a heating system or component while driving on a wet road in winter. A failure mode is a temperature expansion coefficient that causes mechanical cracking or

Brand Name:Sinuo

Model Number:SN4421

Place of Origin:China

...n driving through puddles. The test serves to verify functioning of the component when subjected to shock-type cooling by means of water. This happens when driving on water roads during the winter. Failure modes are mechanical cracking of the materials or

Place of Origin:China

Brand Name:KeRang

...,particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements. Application:Simulate rain dripping on the ground, the water splash on

Brand Name:BAXIT

Model Number:IPx1.2.3.4.5.6/IPx6K/IPx9K

Place of Origin:China

... intensities, angles, and rainfall volumes of rainfall scenarios, it tests and evaluates the waterproof performance of products. Its core value lies in helping enterprises identify potential sealing defects and performance degradation ...

Place of Origin:CHINA

Brand Name:YOUBI

Model Number:UP-6195

... immersion test chamber is a composite test box for ice water splash test and ice water immersion test. It can do spatter or immerse tests alone to simulate the ice water splash or immersed in the heating system or immersed in the heating system or

Brand Name:Sinuo

Model Number:SN4421

Place of Origin:China

..., Test Conditions and Tests-Part 2: Environmental Requirements” clause 9.12 K-12 Thermal Shock with Splash Water VW-80000:2009-10 “Electric and Electronic Components in Motor Vehicles up to 3.5t General Requirements, Test Conditions and Tests”

Brand Name:HongCe

Model Number:SW-1

Place of Origin:China

...Test Equipment Splash Water Test Device Product information This splash water test device is according to the standard requirement of IEC60335-2-64 clause 15.1.1 and 15.1.2 to manufacture,In addition, IPX1, IPX2, IPX3 and IPX4 appliances are subjected for 5 min to the following splash test. The apparatus shown in Figure 101 is used. During the test, the water pressure is so regulated that the water splashes...

Brand Name:BOTO

Model Number:BTHJ-SI9

Place of Origin:China

....2), IEC60068-2-78, IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber is used to test the CFL/LED which meets IES LM-80-08, electricity products, automative cars, home appications and mobiles. What is Climate Chamber? This is used to

Brand Name:SQP

Model Number:SLN-300

Place of Origin:Dongguan, China

Condensate Water Test Chamber SLN Series Product Introduction: The condensed water test chamber can integrate low temperature, high temperature, and humidity testing into one, and can perform 100% humidity testing. It is an essential testing equipment for ...

Brand Name:KINGPO

Place of Origin:China

...Test Equipment Splash Water Test Device Product information This splash water test device is according to the standard requirement of IEC60335-2-64 clause 15.1.1 and 15.1.2 to manufacture,In addition, IPX1, IPX2, IPX3 and IPX4 appliances are subjected for 5 min to the following splash test. The apparatus shown in Figure 101 is used. During the test, the water pressure is so regulated that the water splashes...

Brand Name:ALLIED TESTING

Model Number:IPSN

...spray nozzle against spraying and splashing water test Appliance: Spray Nozzle to prove the degrees of protection IPX3 and IPX4 is a hand-held test device to verify protection against spraying and splashing water. The water pressure can be adjusted using...

Brand Name:GAOXIN

Model Number:GX-6039

Place of Origin:China

... of water passage, the consult the standard table and assess its repellent grade. Parameters Sample platform acreage 350x200mm Inclination of test base 45° Dropper and the sample spacing 10mm Burette volume 50ml Drop volume each drop 0.1ml Length of

Brand Name:HUST Tony

Model Number:WT-07

Place of Origin:Guangdong,China(Mainland)

...Water Jetting Test Chamber is applied to test the watertightness of enclosures of automotive parts, outdoor lamps and electronics parts. The chambers built with the water tightness of sealed components such as head lamp, Power connector. Waterproof power connector in the test room can easily supply electricity to the specimens. IPX5 and IPX6 functions on one test chamber,make testing...

Brand Name:ASLi

Model Number:RT-1000A

Place of Origin:China

...,using rainfall simulation to test the product’s waterproof performance and assess the product’s waterproof performance’s loss classification. Technical parameters about rain test chamber: Model RT-1000A RT-1000B Test Standard JIS, ISO, IEC60529,

Brand Name:PEGO Group

Model Number:PG-IWS

Place of Origin:China

...Water Spray Test Chamber with a Slot Jet for Testing Road Vehicle 1. Introdution The splash water test chamber meets the requirement of ISO16750-4 clause 5.4.2. It can be used for splash water or high temperature test alone, to simulate ice water splashing...

Brand Name:Kejian Kinsgeo

Model Number:KJ-2096

Place of Origin:Dongguan China

...machine is applied to test the products performance of water resistance. Our machine meets with standards of IEC60529 and JISD0203. Different type related environmental test equipment is available for us, such as dust test chamber, salt spray test chamber.

Brand Name:HeJin

Model Number:HJAP07

Place of Origin:China

...Test Equipment Splash Water And Submersion Test Chamber Standard: ISO16750-4 Road vehicles-Environmental conditions and testing for electrical and electronic equipment-Part 4: Climatic loads, clause 5.4.2 Ice water shock test. VW-80000 Electric And Electronic Components In Motor Vehicles up to 3.5t General Requirements, Test Conditions and Tests clause 9.12 K-12 Temperature Shock With Splash Water...

Brand Name:Haida

Model Number:HD-E710-4

Place of Origin:China

... performance of equipment and components under rain. This product adopts scientific design, so that the device can realistically simulate various environments such as dripping, showering, splashing, and spraying water. Into the

Brand Name:LIYI

Model Number:LY-L80

Place of Origin:CHINA

...Water Leak Rain Spray Test Chamber ·Meet the requirement of IEC60529 standard IPX3 water pouring test and IPX4 water splash test. ·The test sample will be put or installed on the center of the half-round sinuous pipe and make the bottom of the test samples and the oscillating axis in a horizontal position. During test...