smoke optical density testing equipment

Brand Name:AI

Model Number:SDB

Place of Origin:China

...Smoke Optical Density Test Equipment Introduction: It has proved to be one of the most versatile fire testing instruments since its inception in the 1980s. This smoke density test equipment is the most widely accepted apparatus for the measurement of smoke from burning materials and measures specific optical density...

Brand Name:LAB TECH

Model Number:SDB

Place of Origin:China

...Smoke Optical Density Testing Equipment Introduction: The SDB NBS Smoke Optical Density Testing Equipment has proved to be one of the most versatile fire testing instruments since its inception in the 1980s. SDB NBS Smoke Optical Density Testing Equipment is the most widely accepted apparatus for the measurement of smoke from burning materials and measures specific optical density...

Brand Name:GOLD

Place of Origin:China

...Test Apparatus NBS Plastics Smoke Density Testing Equipment Introduction: NBS Plastic Smoke Density Testing Equipment is a test equipment used to measure smoke density according to the technical conditions specified in EN 45545-2, ISO5659.2-2006 and ASTM E662 standards. This standard applies to the determination of the specific optical density of smoke produced by plastic combustion, with the maximum specific optical density

Brand Name:DAXIAN

Model Number:DX8330

Place of Origin:China

...smoke density testing equipment Application scope : Mainly used to determine the concentration of smoke released by cables and optical cables during combustion under specific conditions. Compliance with standards: Meet the requirements of GB/T17651.1-1998 and IEC61034-1-2 "Measurement of Smoke Density of Cables and Optical Cables under Specific Conditions of Combustion" test standards. Main features: This testing

Brand Name:YUYANG

Model Number:YY703

Place of Origin:China

...Smoke Generation Optical Density Tester Description: ISO 5659-2 Plastics Smoke Generation Optical Density Test Apparatus by Single Chamber Test is widely used in assessing characteristics of vehicle interior and inflammable cable. Measure the optical density of smoke when a certain thick specimen is exposed to a heat source of 25KW/m2 or 50KW/m2. Standards: ASTM E 662 Standard test method of specific optical

Brand Name:GAOXIN

Model Number:DH-100

Place of Origin:Guangdong, China (Mainland)

...0001~99.9999g/cm3 Abrasion loss 0.01cm3 Testing board Aluminum alloy die-casting moulding Measuring time About 5 seconds for density measuring Memory method Two procedures for density measuring Three procedures for abrasion measuring Opening lid method for

Brand Name:I-suntop

Model Number:GFKA-100

Place of Origin:China

...Optic Cable Hook Test Equipment I-suntop Optical cable mechanical testing equipmen... 1. Usage of IEC-60794-1-2 Standard Outdoor Fiber Optic Cable Hook Test Equipment: This equipment is suitable for impact resistance hookup test of overhead optical cable,including type test (or routine test) and delivery test (or delivery test) to determine the ability of optical...

Brand Name:ZL

Model Number:ZL-1901

Place of Origin:CHINA

... 210 g/1mg 600 g/0.01g Test types solid, liquid,dust, floating body Test time about 1 seconds Density can be tested Density accuracy 0.001 g/cm3 Setting Temperature compensation setting solution compensation setting Function Direct display of density,the k

Brand Name:AETeP

Model Number:AT810

Place of Origin:America

Optical Time Domain Reflectometer OTDR Fiber Tester , Fiber Optic OTDR Test Equipment Product Name: AETeP optical time-domain reflectometer Model: AT810 Introductions: - 7 inches full touch large color screen, a touch too intuitive GUI, provide you with an unprecedented test experience; lightweight, portable, rugged, 12 hours extraordinary life, ideal for fiber optic test environment. - AT800 series has optical performance, make sure your test

Brand Name:AETeP

Model Number:AT810

Place of Origin:America

... Reflectometer OTDR Fiber Tester , Fiber Optic OTDR Test Equipment - 7 inches full touch large color screen, a touch too intuitive GUI, provide you with an unprecedented test experience; lightweight, portable, rugged, 12 hours extraordinary life, ideal for

Brand Name:Kejian

Place of Origin:China

Model Number:DH-300

... D792,ISO1183,GB/T1033 and by adopting the buoyancy method of Archimedean principle, the machine can accurately and directly show the density of sample.Suitable for Rubber, Plastic, Electric wire, Hard alloy, New materials research lab . Features: It has

Place of Origin:China

Brand Name:TTI Fiber

Model Number:FA-ST

...~30dB Material: Plastic Blue, Green, Beige color housing UPC, and APC polish types optional Description: Fiber Optic Attenuator is used in a wide variety of applications and can satisfy almost any requirement where a reduction in power is needed.

Brand Name:Btutest

Model Number:BTU-RDTAE

Place of Origin:Made in China

...Density Testing Apparatus Electric Soil Testing Equipment Description: The purpose of the test instrument is to calculate It is suitable for incohesive soil particle size < 5mm and samples with particle size of 2-5mm is not more than 15% of total samples to determine maximum density and minimum void ratio to calculate the relative density.Soil Testing Equipment...

Brand Name:Sunwise

Model Number:LC APC

Place of Origin:CHINA

... Cord 12 Fibers Pigtail Simplex For Optical Fiber Test Equipment Fiber optic pigtails provide a fast way to make communication devices in the field. They are designed, manufactured and tested according to protocol and performance dictated by the industrial...

Brand Name:YOUCii

Model Number:UC8523B

Place of Origin:China

UC8523 Insert Return Loss Meter Optical Communication Testing Equipment Specification Model # UC8523B+UC88201 Sensor Element InGaAs Operation Wavelength Range 1310 / 1550 nm Power Range + 5 ~ -80 dBm Return Loss Range 0~70 dB Application Fiber Type ...

Categories:Fused Fiber Splitter

Country/Region:china

... with ABS box is also widely used for different applications. Applications ♦ FTTH network ♦ Local Loop ♦ Passive optical network (PON) ♦ Optical fiber CATV ♦ Optical fiber communication system ♦ Optical fiber testing equipment ♦ Optical fiber

Brand Name:Fiberall

Model Number:FA-TEFS01

Place of Origin:China

FA-TEFS01, Desktop Single Fiber Fusion Splicer Suitable For SM MM DS NZDS Fibers With LCD Optical fiber fusion splicer is mainly used for the construction and maintenance of optical fiber cable, so it is also called optical fiber cable splicer. The working...

Place of Origin:China

Brand Name:Lonroy

ISO 1183 ASTM D792 Density Tester Plastic Materials Geomembrane Relative Density Measuring Test Machine Product Description Introduction The geotextile density tester is used for measuring the density and relative density of plastic and other materials...

Brand Name:New Light

Place of Origin:China

Fiber patch cord use SC square tail set 2.0 / 3.0 mm diameter Green color Parameter of fiber optic boot-SC/FC/LC/ST: Insertion loss SM ≤0.20 dB MM ≤0.25dB Return loss P C ≥50 dB UPC ≥55 dB APC ≥65 dB Durability <0.20 dB typical change, 1000 mating Ferrule ...

Brand Name:RBTX

Model Number:RBTX-330S

Place of Origin:Dongguan, Guangdong, China

RBTX-330S OTDR series optical time domain reflectometer is a reliable instrument for measuring optical fiber characteristics. This series of products have the characteristics of compactness, lightness and simple operation. They adopt ergonomic shape design...