single source flammability testing equipment

Brand Name:SHC

Model Number:SC-SCVB

Place of Origin:China

Single Cable Vertical Burning Electrical Control Test Chamber IEC60332 Parameters: Working voltage 220V/50Hz Control operation mode Electrical control, button operation Blast burner standard IEC60695-11-2 Annex A,Burner opening:Φ7±0.05mm,made of brass Gas ...

Brand Name:DAXIAN

Model Number:DX8369

Place of Origin:China

...Test Single Flame Source Flammability Testing Equipment Description: Ignitability test, also called single-flame source test.Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test...

Brand Name:GOLD

Model Number:GD-ISO11925

Place of Origin:China

... flammability test - test time There are 2 ignition times to choose from, 15s or 30s. The test start time is the start time of ignition. If the ignition time is 15s, the total test time is 20s, calculated from the start of ignition. If the ignition time is

Brand Name:YUYANG

Model Number:YY101

Place of Origin:China

...Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame (length ...

Brand Name:HongCe

Model Number:VF-1

Place of Origin:China

... for a single vertical electrical insulated conductor or cable, or optical fibre cable, under fire conditions. Standard of Flammability Testing Equipment: IEC 60332-1-1 Tests on electric and optical fibre cables under fire conditions – Part 1-1:

Brand Name:HJ

Model Number:VF-1

Place of Origin:China

...Flammability Testing Equipment For Vertical Flame Ignition Source Comply With IEC60695-11-2 Product information: This apparatus conforms to the standard requirement of IEC60332-1-1 Tests on electric and optical fibre cables under fire conditions – Part 1-1: Test for vertical flame propagation for a single...

Brand Name:BAXIT

Model Number:BXT-GW

Place of Origin:Shanghai, China(mainland)

...Flammability Testing Equipment Glow wire tester is designed and manufactured according to the requirements of "Glow Wire Test Method" in IEC60695, GB5169.10-11 and GB4706.1. It is suitable for electric fire electronic products, household appliances and their materials for ignition hazard test, simulating hot elements or Thermal stress caused by a heat source or an ignition source...

Brand Name:SKYLINE

Model Number:SL-FL15

Place of Origin:China

Building Material Flammability Test Furnace with Touch Screen Control Description The building materials flammability test furnace is in the normal combustion environment, with a small flame directly impacted the vertical specimen to determine the ...

Brand Name:KINGPO

...Flammability Test Equipment HWI Hot Ignition Wire Tester IEC60695 Flammability Testing Equipment HWI Hot Wire Ignition Tester Lab Equipment IEC60695 Hot Wire Ignition Tester , HWI Test Equipment Product information: This tester conforms to the standard requirement of IEC60695-2-20. It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source...

Brand Name:Kinte

Model Number:WH-8920JK

Place of Origin:Guangdong,China (Mainland)

...Flammability Test Equipment With Gas Round Mouth Bunsen Burner​ The flammability test is a simulated safety test according to IEC 60950: 1999, UL 94, IEC 707, IEC 695-2-2, ISO 1210: 1992 and other standards. The flammability test is to use a certain size of the Bunsen burner (Bunsen burner) and a specific gas source...

Brand Name:HTI

Model Number:HTB-027

Place of Origin:Guangdong,China(Mainland)

.... It can be used for either the hot metal nut test (BS 4790) or the methenamine tablet test (ISO 6925 and BS 6307). The test chamber is manufactured from non-combustible heat resistant board with a counter weighted sliding panel for easy access. The

Brand Name:Sinuo

Model Number:SN775A

Place of Origin:China

...Single Insulated Wire Vertical Flammability Testing Equipment 1KW Standars For Single Insulated Wire Vertical Flammability Testing Equipment: IEC60332-1-1:2015 "Test on electric and optical fibre cables under fire conditions-Part1-1:Test for vertical flame propagation for single insulated wire and cable-Apparatus,IDT" IEC60332-1-2:2015 "Test on electric and optical fibre cables under fire conditions-Part1-2:Test...

Brand Name:AI

Model Number:AIC-9705

Place of Origin:CHINA

...Flammability Testing Equipment AIC-9705 Mattress Flammability Test Equipment.pdf Introduction This mattress test apparatus is designed according to GB/T 34441-2017, it can test combustion performance of soft furniture mattress exposed to flame ignition source. The test part of this equipment can meet the requirements of GB/T 20286, GA 111-1995, ISO 9705-2, GB/T 27904-2011 and GB/T 25207-2010 "Test...

Brand Name:YUYANG

Model Number:YYF408

Place of Origin:China

Multicomponent Toys Flammability Testing Equipment Vertical ISO 6940 Description: This textile flammability tester machine is used to test the flame spread performance of single-or multi-component (coating, quilted, multi-layered, laminated products and ...

Brand Name:Sinuo

Model Number:SN7712

Place of Origin:China

...Flammability Testing Equipment Complied Standards & Clauses The consumables are for various of flammability test chambers, such as glow wire test apparatus, needle-flame test apparatus, tracking leakage test apparatus, horizontal and vertical burning test apparatus, etc. Equipment Overview Name Accessories for flammability testing equipment...

Place of Origin:China

Brand Name:CHENGFENG

... lab test apparatus designed to simulate various types of fire and test the flame resistance of materials and products. It is used to determine the flammability of materials and products in accordance with national standards, and is widely used in

Place of Origin:China

Brand Name:KeRang

Glow Wire Tester GW-1 Standard:IEC60695-2-10, IEC60695-2-13 and UL746A. Application:This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a short time. It is ...

Brand Name:kingpo

Place of Origin:china

Model Number:KP-FT01

...Flammability Testing Equipment ,Glow-wire apparatus Introduction Glow wire test is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A ,GB/T5169.10,GB4706.1.It makes required material(Ni80/Cr20) and heating wire in required shape(Φ4mm-chromel-filament)heated up to test...

Brand Name:lixian

Model Number:HZ-Building Material Fire Tester-2

Place of Origin:CHINA

...Flammability Testing Equipment For Fireproof Building Materials ISO 11925-2 Building Material Fire Tester Description: Ignitability test, also called single-flame source test .Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test...