shoe bending tester iso9001

Brand Name:GAOXIN

Model Number:GX-5010

Place of Origin:China

... the situation in which the shoe surface is squeezed, stretched and twisted during walking. After the test, examine the wrinkles, creases or damage of the test piece as a reference for selecting the upper material. The shoes bending testing grips is

Brand Name:Lixian

Model Number:HZ-3602

Place of Origin:China

... shoes, or check the the shoes cracking for improving the quality. Footwear Testing Equipment Corresponding Standard SATRA-TM92 Footwear Testing Equipment Technical Parameters Model HZ-3602 Specimen fixture 2 pcs of shoe Specimen size Test the whole

Brand Name:HAIDA

Model Number:HD-P810

Place of Origin:Guangdong, China (Mainland)

...the reinforcement of the waist region of shoes. The shank is clamped at its heel end and bent as a cantilever beam by masses added to its forward end. The amount of bending is measured and used to calculate the flexural rigidity of the shank. STANDARD QB/T

Brand Name:Lonroy

Model Number:LR-A217

Place of Origin:China

... performance of finished shoes. By inspecting the force value required when the sample shoe is bent to a certain angle or the angle reached when a certain force is applied, the bending resistance performance of the sample shoe material is evaluated. It

Brand Name:SKYLINE

Model Number:SL-LB01

Place of Origin:CN

... tester, and the flexed part of the finished shoes will be driven by the finished shoes flexing tester to carry out repeated flexing with the angle of flexing matching the shoe type and the fixed rate of the flexing machine, and then the destruction of

Brand Name:HTI

Model Number:TX-532

Place of Origin:Guangdong,China(mainland)

..., or measure the fracture part of the specimen and the fracture level to improve quality. Specification: Specimen: can test two pairs of shoes at a time, children’s shoes 4~13 yards, adult shoes 1~12yards(UK size); Bending angle: 30°, 45°, 60°, 90°(

Brand Name:Great Win

Model Number:GW-009C

Place of Origin:CHINA

Shoes Flexing Testing Machine/ Shoes Forepart Tester(GW-009C) • Brief introduction: This tester is used for determining the flexibility resistance and or indicating the cracks of shoe or shoe sole through reciprocating flexing movements under the specified angle and frequency.(flexing forepart) • Technical Specifications: Model GW-009C Shoe flexing testing machine (forepart) Sampling: 4pcs Bending...

Brand Name:YUYANG

Model Number:YYX-017

Place of Origin:CHINA

...Use the material make into norms specimens, After the bending fatigue of continuous. Observe crack degree to understand or compare their durability. Specifications: 1. Specimen: (L)6"*(W)1"*(D):(L)6"*(W)1"*(D) 2. Sole: 0.25" 3. Rubber: 0.5"0.125" 4. Clamp:

Brand Name:ZL

Model Number:ZL-7044

Place of Origin:CHINA

...Shoe Flexing Tester For French shoes 39 , 42 yards & British 6 , 8 Purpose: Used to test finished shoes - French shoes 39 yards, 42 yards, and the British shoes 6, 8 resistance to bending resistance. The front of the jaws is clamped (the front palm of the shoe is 1/3, located at the position of the shaft). After the motor is actuated, the pulley is driven to drive the rotary plate to apply 30 N of force to the shoe...

Brand Name:HongCe

Place of Origin:China

...Bending Test Apparatus bend tester without screw thread Production introduction: According to the provisions of IEC 60884-1, GB2099.0-1996,12.3.12 provisions of the non threaded terminal bending testing machine. The test machine without screw thread is mainly used for the bending...

Brand Name:kingpo

Place of Origin:china

Model Number:AS/NZS 3112:2011 Clause 2.13.7.2

... tests shall be tested as follows: Pins of assembled plugs shall be tested by clamping the plug in a rigid holding block and applying a bending force, as shown in Figure 2.8, to the pin under test. The pins shall be

Brand Name:Infinity Machine

Model Number:RS-8232

Place of Origin:Made in China

... bending test, observe the material damage, record the bending times while broke. Standard: CNS-7705,JIS-K6545,BS-3144 Specification: Model RS-8232 Test Speed 100±5cpm Grips (optional) 6 sets or 12 sets Specimen 70x45mm Bending Angle 22.5°

Brand Name:BAXIT

Model Number:GLO-50a

Place of Origin:CHINA

... and outside, twist and turn over and over again until a certain times, and checking the damage of the tested materials. The machine is mainly used in clothing, shoes, bags, etc. Compliance with the standard: Manufacture of required specifications for

Brand Name:Liyi

Model Number:LY-S512

Place of Origin:Guangdong, China

...Shoe Flex Tester Product Description This tester is used for testing all kinds of finished shoes after flexing for a certain times in certain angle and frequency, observation shoes and shoe soles damage condition, or check the crack position and degree, to improve quality. Determines the fatigue durability and services life of shoes...

Brand Name:Sinuo

Model Number:SN2302B

Place of Origin:China

...Pulley Flexing Test Machine Cable Bending Tester Product Infromation The SN2302B Integrated Two Pulleys and Three Pulley Flexing Test Machine is a precision testing system designed to evaluate the bending mechanical performance of flexible finished cables...

Brand Name:JIEDONG

Model Number:JD-3001F

Place of Origin:Guangdong, China

... and other related standards "General safety requirements for cord components and power cords". Applicable to the relevant manufacturers and quality inspection departments to bend the

Brand Name:AI

Model Number:AIC22180

Place of Origin:China

...tests of bare wires and metal wires, to detect their plastic deformation performance and failures in repeated bending. Test method: fix one end of the specimen, and the free end along with a predetermined radius of cylindrical surface to do bending test at

Brand Name:MIYU

Model Number:MY-XC-360-R

Place of Origin:China

Wire/Cable Bending Tester (MY-XC-360-R), Sheet metal material with white color Description This testing machine is customized according to the "General Safety Requirements for ...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-E805-1

..., placing in the oven for 4 hours. Take out the test pieces, after drying, evaluate the levels of the resistance to sweat. Apply to all kinds of fiber cloth fabric and the shoes. The