sff 8417 bending cycle tester

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made In China

SFF 8417 Cable Bending Cycle Tester Suitable for Communication Cable Bending Test Model:C5092 Purpose: Cable bending test machine is suitable for the bending testing of the multi-wires cable, communication cable, earphone cable etc. The testing method is ...

Brand Name:KINSGEO

Model Number:KJ-1065

Place of Origin:China

...fatigue cycling on metals, tape, composites, alloys, rigid plastics and films, elastomers, textiles, paper, board and finished products. Design standard: ...

Brand Name:YUANG

Model Number:YYX-014

Place of Origin:CHINA

.... It is applicable to all fiberboards other than those used for insole seats and heel lifts. Fiberboard is flexed mechanically and repeatedly to (90±1)°each side of the vertical at the rate of 60 cycles per minute until failure occurs. From the

Brand Name:Gaoxin

Model Number:GX-5025

Place of Origin:China

...Bending Resistance , BALLY Leather Flexing Resistance Tester This tester designed to test the leather, artificial leather flexing resistance and transfer finished leather. The clamp descends through an angle of 22.5° and cycling (100±5) times per min, the number of cycles...

Brand Name:SKYLINE

Model Number:SL-BT97

Place of Origin:China

..., in the plane of the wheel and perpendicular to the axis of the fork riser, was applied to a load carrying device that rotated on the pivot of the fork joint. The test cycle is 100,000 cycles and the test force values are shown in Table 9. The

Brand Name:Haida

Model Number:HD-B609B-S

Place of Origin:China

... level widely used for tension, compression, bending and shearing test of all kind of materials. The Test Object Compress tester load cell low cycle fatigue test Tensile Strength Tester mainly applied to test the metallic and non-metallic materials such as

Brand Name:TESTEX

Model Number:TF114

Place of Origin:China

Fabric Stiffness Tester , To Test The Bending Height , Flexural Rigidity And Bending Modulus Application Fabric Stiffness Tester Pneumatic, used for testing the stiffness of fabric by the bending cycle test method of ASTM. Test Procedure A plunger of 25....

Brand Name:ZL

Model Number:ZL-3417

Place of Origin:CHINA

...Bending Tester Product Overview The power line bending tester is designed for testing the bending durability of power leads on small household appliances and lamps (such as electric irons, coffee pots). This equipment complies with GB4706:25.14, IEC60335-1:25.14, UL, VDE and other standard requirements. The tester can preset test cycles...

Brand Name:I-SUNTOP

Place of Origin:china

... Bending Fatigue Test Machine apply for bending endurance test for cable connected with plug.Fix the sample on jig and put the weight at the cable, then to swing the jig right and leftwith the setting angle. after rotating to required cycles then stop to

Model Number:UP-4002

Place of Origin:CHINA

Brand Name:YOUBI

UP-4002 Automatic Leather Bending Tester Detects Cracking Risks of Finished Leather Accessories Product Overview The UP-4002 Automatic Leather Bending Tester determines the resistance of flexible materials to cracking or other types of failure at flexing ...

Brand Name:CHENGFENG

Model Number:CF8390

Place of Origin:Guangdong, China

... D813 De Mattia Flexing Fatigue Tester CF8390 The CF8390 De Mattia Flexing Fatigue Tester evaluates the resistance of vulcanized rubber and elastomeric materials to crack growth and flex fatigue under repeated bending cycles per ASTM D813 and ISO 132. This...

Brand Name:HTI

Model Number:HTX-023

Place of Origin:Guangdong,China(Mainland)

... resistance. Can test 12 pieces of sample at the same time, equipped with preset electronic counter, record the cycles. Specifications: Flexural Angle: 22.5° Speed: 100±5rpm (adjustable) Counter: 0~999,999 Station: 12 Dimension: 850×...

Brand Name:GESTER

Model Number:GT-KB06

Place of Origin:CHINA

... some holes at the maximum bending position, and mount specimen at both grips, one fixed, one movable. Specimen runs flexing owing to the movement of machine. After a certain test cycles, remove the specimen and check its difference of incision length.

Brand Name:BAXIT

Model Number:GLO-7122

Place of Origin:CHINA

...tester of rubber Application : sport shoes oursole flexing resistance tester is used to measure the flexing resistance of shoe soles under continuous movement. Before test, plunge some holes at the maximum bending position, and affix specimen at both, one fixed, one movable. Specimen runs flexing owing to the movement of machine. After a certain test cycles...

Brand Name:HUAKAI

Place of Origin:Guangdong, China

Product Overview The Ski Bending Fatigue Testing Machine is designed to test the bending fatigue resistance of skis and snowboards. It uses a motor-driven mechanism to repeatedly move the sliding rod up and down, bending the ski over a set period. After...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-F750A

...Tester Sponge indentation hardness tester Description: Sponge indentation hardness testing machines compression testing machine is also known as sponge, foam indentation hardness testing machine, tensile metallic and non-metallic, polymer materials, compression, bending, detection of low cycle...

Brand Name:PTE

Model Number:100Kg - 500 Kg Capacity Servo Control System Fabrics Tearing Strength Tester Rubber Tensile Tester Testing Equipment

Place of Origin:China

..., bending, shearing and low cycle test. With special grips, it can also do very special test as customer’s request. It is for metal, rubber, plastic, spring, textile, and components testing. This machine is ...

Brand Name:Wangtebei

Model Number:WAW-600B

Place of Origin:China

... strength testing machine brick compress strength tester 1.introduction universal testing machine is applicable for wide range of material for tension, compression, bending, shearing and low cycle test. Suitable for metal, rubber, plastic, spring, textile...

Place of Origin:Guangdong, China

... Tensile Strength Tester Product Overview The Liyi Computerized Electronic Universal Fabric Material Tensile Strength Tester is designed for quick and reliable tensile, compression, bending, shear, peel, loop tack and fatigue cycling tests on various ...

Brand Name:Great Win

Model Number:GW-005

Place of Origin:CHINA

...er continuous movement. Before test, plunge some holes at the maximum bending position, and mount specimen at both grips, one fixed, one movable. Specimen runs flexing owing to the movement of machine. After a certain test cycles, remove the specimen and