25-175 RHAM Heavy Wall Rod Insert Pumps For Oilfield
|
25-175 RHAM Heavy Wall Rod Insert Pumps For Oilfield RHAM heavy wall rod insert pumps description: Sucker rod pump is equipped with a seating nipple(there are two seating nipples in API-RHBM-AC) , seating nipple connection on the tubing string, down to ......
Puyang Zhongshi Group Co., Ltd.
|
Insert Pump 1 Inch Sucker Rod Pump Oil Drilling Diameter 28mm 32mm
|
...sucker rod pump: The Sucker rod pump is connected to sucker rod after being assemblied on the surface then it is pulled down to the well bottom through the tubing. Thus it is convenient for the inspection and workover because they can be pulled up and down...
Dongying Oilman Machinery Equipment Co.,Ltd.
|
Haihua F1600 Mud Pump Valve Rod Guide (Lower), Mud Pump Fluid End HH11309.05.05.002 mud pumps for drilling rigs148
|
...Pump Valve Rod Guide (Lower), Mud Pump Fluid End HH11309.05.05.002.148, Valve Rod Guide (Lower) was used in Mud Pump Fluid End. The mud pump valve rod guide (lower), which is installed in the chamber of the cylinder, acts as a centring and positioning suction valve body assembly. It consists of a guide body and an inner sleeve, which is inserted......
Sanyuan Yinda Petroleum Machinery Co.,Ltd
|
Carbon Steel Downhole Oil Extraction Sucker Rod Pump
|
... by pumping units and sucker rod, which is also referred to as insert pump as its plunger is attached to, moves up and down with the sucker rod string. It is suitable for reducing the time of workover for deep well as it is not neccessary to pull all...
Xi'an TianRui Petroleum Machinery Equipment Co., Ltd.
|
FB-1600 Mud Pump Piston Rod 40Cr Phosphating Fluid End Components
|
... and Oil Well brands, two piece rods are offered to facilitate removal of piston. An elastic stop nut is available for tightening the piston on to the piston rod. A specially designed piston rod nut wrench is available to prevent crimping the wall of the...
SUSITNA TECHNOLOGY（QINGDAO）CO., LTD
|
National 14P220 mud pump spares, 12P160 mud pump, 10P130 mud pump, 9P100 mud pump, 8P80 mud pump, 7P50 mud pump
|
Description Part No. Description Part No. Discharge Module, Studded 1295601 Seal Retainer 1295174 Suction Module, Studded 1295604 Back Up Ring 1295175 Valve Guide Holder 1292140 Threaded Ring 1295176 Valve Guide Insert 1292141 Discharge Connector 1295252 ......
Qingdao National Premium Oilwell Machinery Co.,Ltd
|
ISO9001 3m Length DTH Hammer Directional Drilling Pipe Double Wall
|
... drill rod and outer drill rod). The inner cavity hole of the inner drill pipe is a channel for pumping water or mud to the construction hole during operation. In engineering operations, the outer drill rods are connected to each other by threads, and the...
Langfang Baiwei Drill Co., Ltd.
|
011057-1 FLOW direct drive plunger insert; .49" OD of water jet cutting machine waterjet pump parts
|
... the gland is inserted, the circlip is used to snap into the groove on the inner side of the piston and the installation is stable. It moves in the high-pressure cylinder and contacts with the high-pressure seal, which ......
SHANDONG WAMI CNC TECHNOLOGY CO.LTD
|
4" (101.6)mm RC Dual Wall Drill Rod With 4" Remet Thread For RC Drilling
|
... of inner and outer drill pipes (called inner pipe and outer pipe). The inner and outer pipes constitute an annular gap, which is a channel for pumping the flushing medium to the bottom of the hole when hydraulic rock drilling and...
ROSCHEN GROUP
|
3kg Grease Bucket Pump Pneumatic Wall Mounted Dilute Oil Pump 45mm
|
Pneumatic wall mounted dilute oil pump Pneumatic wall mounted dilute oil pump. Suitable for wall mounted oil pump Specification: 1:1 PUMP 35L/min oil pressure<8Kg Suck rod:270mm diameter :45mm Suitable for wall mounted Company Profile Shanghai AA4C AUTO ......
Shanghai AA4C Auto Maintenance Equipment Co., Ltd.
|
Submit your “thin walled rod insert pump” inquiry in a minute :