20 KA Class II DC Surge Protection Device DIN Rail 48V SPD With CE Certificated
|
.... • Indoor/Outdoor: Indoor. • For mounting: DIN-Rail. • Service Voltage: 48Vdc. • SPD Technology: MOV. • The varistor have thermal disconnection devices. • Designed according to IEC 61643-31/GB 18802.1. • Fault indication via red mark in...
Britec Electric Co., Ltd.
|
Vmax 275V LED Surge Protection Device Din Rail ISO9001 Approved
|
230V Class III SPD ,3kA LED Surge Protection Device Made by Thermal plastic Lightning protection LED Surge Protection Device SPD classification according to EN61643-11 Type 3 SPD classification according to IEC 61643-11 Class III Nominal a.c. voltage Un ......
Guangdong Uchi Electronics Co.,Ltd
|
Vmax 275V LED Surge Protection Device Din Rail ISO9001 Approved
|
|
230V Class III SPD ,3kA LED Surge Protection Device Made by Thermal plastic Lightning protection LED Surge Protection Device SPD classification according to EN61643-11 Type 3 SPD classification according to IEC 61643-11 Class III Nominal a.c. voltage Un ......
Guangdong Uchi Technology Co.,Ltd
|
Single Channel Network Surge Protecter Device Guide Rail
|
Single Channel Network Surge Protecter Device Guide Rail 1. Support 10/100/1000Mbps Ethernet Device Protection 2. Guide Rail & Desktop Installation 3. POE Surge Protection 4. Industrial Grade Technical Parameters Interface Form RJ45 Rated operating voltage......
Shenzhen Qiutian Technology Co., Ltd
|
Power surge protection device low voltage arrester surge protector 220v
|
...surge protection device can be produced on request Product Installation With 35mm standard DIN-rail mounting, connecting copper stranded conductor is 2.5~35mm² At front of spd each pole must be setted protection---used fuse or miniature circuit breaker lightning current SPD protection,after SPD breakdown to short circuit protection. SPD install on protected......
Zhejiang THOR Electric Co., Ltd
|
Yellow 20ka 3 Phase AC Surge Protective Device 385V For Lighting Protection
|
...Low-voltage Surge Protective Devices-Part 1: Surge Protective Devices Performance Requirements and Test Method of Low-voltage Power Distribution System. With good sealing, it is designed as module and 35mm din-rail mounting. With working indication window,...
Hunan Heou Engineering Consulting Co., Ltd
|
Standard Rail 35mm 3P AC275V SPD Surge Protective Device
|
... supply system of AC 50/60Hz,<380V, installed on the joint of LPZ1 or LPZ2 and LPZ3. It's designed according to IEC61643-1,GB18802.1, it adopts 35mm standard rail, there is a failure release mounted on the module of surge protection device, When the...
YUEQING FEEO ELECTRIC CO.,LTD
|
HKSPD1 Control And Protective Switching Device Surge Protection Device 1P
|
... installations. It is designed according to ICE61643-1 and GB18802.1 standards, installed on DIN rail EN 60715 (35mm) by means of fast clip device. It is built in with failure interrupter device, will automatically interrupt when breakdown fails due to...
Yueqing Vorax Electric CO.,LTD
|
LPEP 385/20M Series Surge Protective Device with 385V Max Continuous Voltage 35mm Rail Mounting and Up≤1.8kV Protection Level
|
The LPEP 385/20M Series Surge Protective Device The LPEP 385/20M T2 Series Surge Protective Device is designed for overvoltage/surge protection in power secondary systems, including distribution cabinets, feeder panels, control/monitoring panels, UPS ......
Guangzhou GENY Electric Co., Ltd
|
Phoenix Contact 2907918 PLT-SEC-T3-120-FM-UT - Type 3 surge protection device
|
...remote signaling for single-phase power supply networks. Nominal voltage: 120 V AC/DC Specifications Product type Device protection Product family SEC Family IEC power supply system TN-S TT Type DIN rail module, two-section, divisible Number of positions 2...
Nanjing Dortmund Electric Co., Ltd.
|
Submit your “surge protection device din rail 35mm” inquiry in a minute :