Static Wind-Force Test Apparatus IEC60598-2-3 for Testing Lighting Fixture
|
Static Wind-Force Test Apparatus IEC60598-2-3 for Testing Lighting Fixture 1. Introduction The static wind-force test apparatus is designed to meet the test requirements of IEC60598-2-3:2011 clause 3.6.3.1 & figure 1 and IEC60598-2-5 clause 5.6.5, the equipment consists of sandbag, net, weight and test rig. The static wind-force test......
Pego Electronics (Yi Chun) Company Limited
|
IEC 60598-2-3 Mast-arm Mounted Luminaries Static Wind Force Test Device
|
....5. It used to detect the static load test of wind resistance for street lamps outdoors. The working principle is to use a small sandbag to spread evenly on the road lamp under test, or use a net to cover the lamp, and then test the load on the net. This...
Sinuo Testing Equipment Co. , Limited
|
EV Charging Connector Withdrawal Force Test Apparatus IEC 62196-1
|
... This EV Charging Gun Withdrawal Force Test Apparatus is designed in compliance with IEC 62196-1:2022 clause 16.16. It accurately measures the maximum force required to insert the charging gun into the socket, ensuring the charging interface is easy to...
Sinuo Testing Equipment Co. , Limited
|
CF8785 Roof System Wind Resistance Testing Apparatus Used In Construction Materials And Testing
|
... roof wind resistance test, physical properties of metal roof. [Applicable standards] GB/T 31543 "Wind resistance test method for single-layer roll roofing systems", JGJ 255 "Technical specifications for skylight roofs and metal roofs&......
Dongguan Chengfeng Testing Equipment Co., Ltd
|
IEC60884 Figure 20 Six Workstation Flexible Cable Cord Retention Force Test Apparatus
|
...Force Test Apparatus Product details: This is a customzied 6 workstations flexible cable cord retention test apparatus.It well meets our customer's special testing requirements. The cord retention test apparatus is designed and manufactured according to the standard requirement of IEC60884 figure 20. It is used to test......
KingPo Technology Development Limited
|
Vertical Pressure Chair Footrest Static Vertical Force Testing Equipment BIFMA Standard
|
...testing, destructive testing and fatigue testing use of the office chair Ipomoea base (Star Base) repeated pressure loading in setting force test cycle, as the fatigue test. Pressure on the size of the holding pressure time and cycle number of tests can be...
Dongguan Haida Equipment Co.,LTD
|
IEC 60851-3 Winding Wires Winding Test Apparatus For Enameled Round Wire
|
...winding test apparatus is suitable for measuring the flexibility, adhesiveness, thermal shock and other performances of the film of enameled round wire with nominal conductor diameter below 1.600mm; 3.Used with JRB-16 enameled round wire winding test bar; 4.This winding test apparatus can set any number of winding......
Advanced Instruments Co.,Limited
|
PVC Wire / Cable Cracking Resistance Winding Test Apparatus GB/T2951.31.9-2008
|
...Winding Test Apparatus Product information: This test device conforms to the standard requirement of GB/T2951.31.9-2008. It is applicable for the PVC wire and cable to do the winding test before the split test in the condition of high temperature. It is the auxiliary means for the split test. It is also used for the winding test......
Guangzhou HongCe Equipment Co., Ltd.
|
Fire Smoke Density Test Apparatus For Building Material With Standard ASTM D2843
|
...Test Apparatus For Building Material With Standard ASTM D2843 Building material smoke density test ,use for test building material static state smoke density in the condition of burning or decompose ,by test the loss of light in test case ,can watch flame and smoke during testing. Model:5910 Standard:ASTM D 2843 SMOKE DENSITY TEST GB/T 8627 SMOKE TEST......
Suzhou Yangyi Vouch Testing technology Co.,Ltd
|
Electrical Wire Tester PVC Cable Cracking Resistance Winding Test Apparatus
|
...Winding Test Apparatus Application: PVC wire and cable, in the high temperature state before the cracking test winding, wire and cable cracking test is also an auxiliary tool for other industries can also be applied to the soft wire winding test. Test standard: meet GB / T2951.6-1997 standard requirements. The main parameters: 1, the largest winding diameter: Φ12mm 2, the maximum winding......
Guangzhou Kinte Electric Industrial Co.,Ltd
|
Submit your “static wind force test apparatus” inquiry in a minute :