IEC 60669-2-1 Self - Ballasted Lamp Switch Load Cabinet For Test Capability Of The Switches
|
...Self-Ballasted Lamp Switch Load Cabinet For Test Capability Of The Switches Product information: The load cabinet conforms to the requirements of IEC60669-1:2017 clause 19.3 and IEC60669-2-1: 2015 figure 103, clause 19.109, IEC60669-2-1: 2021 clause 19.106. It is suitable for the on-off capability and normal operating life test of switches for household and similar fixed electrical installations. Especially suitable for switches...
Sinuo Testing Equipment Co. , Limited
|
IEC 60669-1 Test Equipment Self Ballasted Lamp Bulb Load Box Three Test Stations
|
... – Part 1: General requirements clause 19.3 Test for switches intended for self ballasted lamp loads. Application of Self Ballasted Lamp Load Box: Switches intended for self ballasted lamp (SBL) loads shall withstand, without excessive wear or...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC60669-1 LED Testing Equipment / Self Ballasted Lamp Switches Fully Automatic Breaking Capacity Endurance Tester
|
...Self Ballasted Lamp Switches PLC Control Fully Automatic Breaking Capacity Endurance Tester Product introduction : This device is suitable for breaking capacity and normal operation life test of switches intended for self ballasted lamp loads. Switches intended for self ballasted lamp (SBL) loads shall withstand, without excessive wear or other harmful effect, the electrical and thermal stresses occurring when controlling self...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60669-1 3 Stations Breaking Capacity And Normal Operation Life Test for Self Ballast Lamp Load
|
...Self Ballast Lamp Load Standard: IEC60669-1:2017 clause 19.3 Application: This device is suitable for breaking capacity and normal operation life test to fixed switches for house held and similar purpose, especially suitable for self ballast lamp switch electric stress and thermal stress test when control the LED circuit. To verify whether the switch......
Dongguan Kingpo Technology Limited
|
10V 3W UV Lamp Self Ballasted UVC Light Shoe Cabinet Disinfection
|
... Overall length: 52mm Lamp holder: screw E17 Scope of application: It is suitable for sterilization and deodorization of shoe cabinets, disinfection cabinets, microwave ovens, refrigerators, etc. Special reminder: The bulb must be used with a capacitor or...
Ningbo Uv Light & Electricity Co., Ltd.
|
KP-GT1802 Lamp Load Cabinet 3-Station 250V IEC 60669-1 Test
|
... lamps. Test principle: Switches used to control self-ballasted lamps should withstand the electrical and thermal stresses that occur when controlling LED circuits without excessive damage or other harmful effects. The purpose is to assess whether there is...
KingPo Technology Development Limited
|
Resistive Inductive and Capactive Power Load Cabinet 300V/30A for Plug Socket Coupler and Switches Testing
|
...Load Cabinet 300V/30A for Plug Socket Coupler and Switches Testing 1. Introduction Power Load cabinet is a support equipment to work with plug socket-outlet and switch life testing machine, and meet the test requirements of IEC60884-1 clauses 20 and 21, and IEC60669-1 clauses 19.1 and 19.2. This power load cabinet can switch to resistive output, capacitive output (fluorescent lamp load......
Pego Electronics (Yi Chun) Company Limited
|
17AM 250V Thermal Protector Bimetal Thermostat Switch ROHS Self Hold
|
Self-Hold Normal Closed 17AM Thermal Protector 10A 250V 45C~180C For Motor Power Applications Of The 17AM Thermal Protector 10A 250V 45C~180C Ballasts, fluorescent lamps, motors, motors, transformers, laminators, rechargeable batteries, solenoids, ......
Dongguan Ampfort Electronics Co., Ltd.
|
Ul1054 / UL943 Tungsten Lamp Load Bank 50/60 Hz 1-20 A Test Rated Current
|
...lamp load cabinet in accordance with requirements for various switches. ● Technical parameters: 1. Testing voltage: AC125/250V, 50/60Hz; 2. Tungsten lamp load control cabinet can provide 10 groups of tungsten lamps (holder) for each lamp box, and several...
Guangzhou Kinte Electric Industrial Co.,Ltd
|
IR Hand Wave Sensor Switch 12V 24V For Cabinet Desk Wine Case Drawer Lighting
|
...Switch for Cabinet, Desk, Kitchen, Wine Case, Drawer Lighting Product Introduction: Load power: 12V 60W / 24V 120W Working voltage: DC12-24V 5A Detection distance: 30-80 mm Appearance color: white Wire specifications: UL2468 20AWG*2C Switch cord length: 1.5 meter Product function: wave hand above sensor to turn on LED light, wave again to turn off LED light. Application lamps: LED lights, wardrobe lights, cabinet......
Microwave Intelligent Electronics (Zhongshan) Co., Ltd
|
Submit your “self ballasted lamp switch load cabinet” inquiry in a minute :