Small Non Destructive Testing Equipment Floor Thickness Detector All In One Type
|
... the thickness of concrete or other non-ferromagnetic media; in use, the transmitting probe and the receiving probe are placed on the floor respectively. The two opposite test surfaces respectively transmit and receive electromagnetic signals, and the...
Jinan Wang Te Bei Equipment Co., Ltd.
|
Portable Non Destructive Testing Equipment , Ultrasonic Coating Thickness Gauge TG 4000
|
Non Destructive Testing Equipment Through Coating Ultrasonic Thickness Gauge TG 4000 with Velocity Range 1000 - 9999 m/s TECHNICAL DATA Display 128X64 Pixel LCD with backlight Measuring range (in two function modes of Standard mode and through coating mode) Standard mode 0.8 mm-- 300.0 mm in steel depending on the probe. Special request can reach measuring range up to 500mm Through coating mode 2.5 mm – 18.0 mm (Probe......
HUATEC GROUP CORPORATION
|
TG-200 Precision Non Destructive Testing Machine Coating Thickness Tester with F and NF Measuring Probes
|
...Non Destructive Testing Machine Coating Thickness Tester with F and NF Measuring Probes Application Description: F Type Magnetic induction: ● Can measure the thickness of non-magnetic coating layers on magnetic substrate ● Such as: (aluminum, chrome, copper, enamel, rubber, paint) on magnetic substrate (steel, iron, alloy and magnetic stainless steel) NF Type Eddy Current: ● Can measure the thickness of non......
Guangdong Hoyamo Precision Instrument Limited
|
Non Destructive Testing Equipment SRT-6210 Portable Surface Roughness Tester Portable
|
...Non Destructive Portable Surface Roughness Tester with RS232 Model: SRT-6210 Technical Data Download: iqualitrol Surface Roughness Tester SRT-6210 When measuring the roughness of surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism inside the tester. The sensor gets the surface roughness by the sharp built-in probe. This roughness causes displacement of the probe...
Dongguan Quality Control Technology Co., Ltd.
|
CSL Cross Hole Ultrasonic Monitor Non Destructive Testing Method
|
... tubes or probes embedded in the concrete. One probe acts as a transmitter, while the other acts as a receiver. As the ultrasonic waves travel through the concrete, they are reflected back to the receiver by any discontinuities or changes in the concrete's...
Chongqing Gold Mechanical & Electrical Equipment Co.,Ltd
|
Non Conductive Coatings Non Destructive Testing Equipment Coating Thickness Tester
|
Coating Thickness Gauge CM-1210-200N for Non-Conductive Coatings on Non-magnetic Metals Brief Introduction: The F probes measure the thickness of non-magnetic materials on magnetic materials. The N probes measure the thickness of non-conductive coatings......
DongGuan Q1-Test Equipment Co., Ltd.
|
0.02~2.00mm Crack Width Gauge Non Destructive Testing Equipment 1 Year Warranty
|
Crack Width Gauge Concrete Testing Equipment Features: Newly upgraded, with three proof shell design, waterproof, dustproof and shockproof; Imported sensor chip is adopted, with high test accuracy; The host screen is provided with scale marks, which is ......
Hebei Better United Import And Export Co., Ltd.
|
MD-4G Non Destructive Testing Equipment 40% Moisture Meter Four Pins Sampling
|
...Non Destructive Testing Equipment 5%~40% Moisture Meter This moisture meter can detect the water composition of a wide range of materials such as wood, bamboo, cotton, tabacco, paper and etc. It has wide measuring range of 5% to 40% moisture level. It has 4 steel sharp probes......
Shaanxi Sibeier(Sbe) Electronic Technology Co., Ltd.
|
Digital Ultrasonic Thickness Meter, Metal Thickness Gauge, non destructive testing RTG-510
|
... IN STEEL DEPENDING OF THE PROBE special request can reach measuring range up to 500mm THROUGH COATING 2.5 mm – 18 mm ( DEPNDING OF THE PROBES ) TOLERANCE +/-0.05 mm IN STEEL DISPLAY RESOLUTION 0.01mm ( Less than 100.0 mm ) 0.1mm( over 100 mm ) BULIT-IN...
RAYTECH NDT INSTRUMENT CO.,LTD
|
Eddy Conductivity Meter Non Destructive Testing Probe With 14mm 60KHz & 8mm 500KHz
|
Standard probe for eddy conductivity meter of TMD-105 Probes B type machine with diameter 14 mm working frequency of 60 KHz and diameter 8mm working frequency of 500 KHz of a probe; The probe is made of imported material, wear-resistant and high ......
TMTeck Instrument Co., Ltd
|
Submit your “non destructive testing broadband probe” inquiry in a minute :