Indentation Device Safety Test Equipment IEC60811 SUS304 For Insulation Sheaths
|
...Indentation Device for Testing Cable Insulation Sheaths 1. Introduction The indentation device is designed according to IEC60811-508:2012 figure 1, the device is consisted by blade, supporting mandrel and loads.It is applied to test the indentation produced by the insulation sheath of the plug or cable under high temperature and pressure, the device should work with oven. 2. Parameter Test......
Pego Electronics (Yi Chun) Company Limited
|
HDX1310 High Temperature Indentation Device IEC Test Equipment
|
...:Particular requirements -Lighting chains’ clause 20.15 EN60811-3-1 insulating and sheathing materials of electric and optical cables-common test methods Application: Used for PVC insulated and...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
AC40-50V IEC Test Equipment , Electrical Safety Testing Equipment
|
... with the testing probe for the convenience and correctness. In the two output electrodes, the low potential (the red one) is connected with the energized part of the electrical appliance and the high potential is connected with the ......
KingPo Technology Development Limited
|
Battery Explosion-proof Test Chamber Lithium Battery Safety Test Equipment
|
..., IEC 62281: 2006, IEC 60086: 2007. Product Overview The SN552D-864L Battery Explosion-proof Test Chamber is specifically designed to ensure the safety of laboratory personnel and equipment during lithium battery testing procedures such as overcharge, over...
Sinuo Testing Equipment Co. , Limited
|
Stainless Steel Toys Safety Test Equipment , EN71 -1 1kg Toys Impact Testing Machine
|
...Testing Equipment EN71 -1 1kg Toys Safety Impact Testing Machine Descriptions: Reduce the material damage or the danger of imitation toys protection devices as the real face. Range: imitation protect device (clear material protector, headpiece ,cap, blinker) Standards: EN 71-2011 8.7 impact test......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
SUS 304 Laboratory Battery Safety Testing Equipment Battery Burning Combustion Tester Machine
|
...mainly used for battery flame resistance test, which is mainly to test the reliability of battery safety performance and battery flame resistance when the battery encounters an open flame. Specification 1. Burner: Bunsen burner, the inner diameter of the...
Guangdong XWELL New Energy Technology CO., LTD.
|
Hammer Test Device IEC Test Equipment Adhesive Force Test Of Hot Dip Galvanizing Coating
|
...Test Device IEC Test Equipment Adhesive Force Test Of Hot Dip Galvanizing Coating Product details: This test device confirms to the standard of YDT757 drop hammer test way. It’s suitable for the adhesive force test of hot dip galvanizing coatings. During the test, the free dropping hammer is used to hit the zinc coating to test......
Guangzhou HongCe Equipment Co., Ltd.
|
Burning Flame 38mm Safety Test Equipment Automotive Interior Material
|
... combustion test device is suitable for identifying the horizontal combustion characteristics of interior materials of automobiles (cars, multi-purpose passenger cars, trucks and buses). Product Description: This burning test device can detect textiles,...
Dongguan jie dong test equipment co.,LTD
|
Lithium Battery Safety Testing Equipment , Cell Battery Penetration Testing Equipment
|
... Test: The battery is to be crushed between two flat surfaces. The force for the crushing is to be applied by a hydraulic ram with a 32mm diameter piston. The crushing is to be continued until a pressure ......
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
Leakage Current Tester Electrical Appliance Safety Testing Equipment
|
Leakage Current Tester Electrical Appliance Safety Testing Equipment Product information: ■ Meet the electrical safety general test requirements of IEC60335.1, UL60335.1, GB4706.1, etc. ■Built-in common human body simulation impedances, different ......
Sinuo Testing Equipment Co. , Limited
|