IEC 62196 Charging Plug Tester EV Socket Mechanical Test Device Endurance Tester
|
IEC 62196 Charging Plug Tester EV Socket Mechanical Test Device Endurance Tester Complied Standards & Clauses Conforms to IEC 62196-3: 2020 clause 22 and 23, IEC62196-1: 2020 clause 22 and clause 23, IEC60309-1: 2012 clause 20 and clause 21, etc. Product Overview The servo motor drive mechanism is used to perform linear plug......
Sinuo Testing Equipment Co. , Limited
|
2000V TPU IEC 62196-2 Plug Type 2 To Type 2 EVSE Charging Cable
|
...Phase IEC 62196-2 Plug Type2 To Type 2 Connector Car Charger 16a 32a Ev Charging Cable Product Description: a) 3 Phase 1 Phase IEC 62196-2 Plug Type2 To Type 2 Connector Car Charger 16a 32a Ev Charging Cable suitable for all e-cars and plug-in hybrids .To ......
Chengdu Heiu Technology Co., Ltd.
|
IEC 62196 EV Plug Grounding Contacts Short-time High-current Withstand Test Equipment
|
IEC 62196-1 Short-time Test Current and Temperature Rising Test System Test Current 6500A Product overview: This test system meets the standard requirements of IEC 62196-1Ed.4CDV 2020 clause 12.3, clause 24, table 10, clause 34.2, 34.4 and 35.4., IEC 62916-2, IEC 62916-3, etc. It is suitable for detecting the temperature rise test after the EV plug......
Sinuo Testing Equipment Co. , Limited
|
16A / 32A Wallbox Home EV Charging Station 22KW 11KW 7KW 1 / 3 Phase IEC 62196-2 Plug
|
...IEC 62196-2 Plug EVOYAGE EV Charger support your life! EVOYAGE Wall Box Type 2 EV Charger is a Three Phase AC charging pile, mainly used for AC charging of electric vehicles. The design of the product is highly simple. It provides card swiping and plug and play charging modes, with charging protection...
Chengdu Sixpence Technology Co.,Ltd.
|
7kW IEC 62196-2 Plug-in Charger Unit with Max Output Power and Connector Type
|
...maximum output power of 7kW and weighs only 5kg. The Wallbox EV Charger also features an IEC 62196-2 connector type, and is equipped with essential safety features such as overload, over-voltage, over-temperature and short-circuit protection. This Plug-in...
LINCHR NEW ENERGY
|
Robust Lightweight Type 2 To Type 2 EV Charging Cable IEC 62196-2 Plug EU Standard
|
Selling EU standard dc fast EV charging connector type 2 to type 2 ev charging cable Product Description Input & Output Input voltage/Output voltage 100~250V AC Max. output current 16A 1Phase Input frequency 47~63Hz Charging interface type Type 2-2 Max. ......
Chengdu Honors Technology Co.,Ltd
|
Charge Gun EV Plug And Connector Breaking Capacity Tester IEC 62196-1
|
... vehicle charging interfaces, industrial plugs, socket-outlets and couplers can withstand the mechanical, electrical and thermal stresses that occurred during normal operation without excessive wear or other harmful effects. The ......
KingPo Technology Development Limited
|
IEC 62196-1 Connection Set Conductive Charging For Electric Vehicles Test Machine
|
IEC 62196-1 Connection Set Of Conductive Charging For Electric Vehicles Test Machine Introduction: IEC 61851-1 specifies electric vehicle conductive charging equipment. This international standard, referred to as the IEC 60309 series in IEC 61851-1, specifies the requirements for plugs, socket-outlets, connectors, inlets and cable assemblies as described in IEC......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 62196-1 Clause 25.3 Cord Anchorage Pull Force And Torque Tester For EV Plugs And Vehicle Connectors
|
... and torque tester is designed according to IEC62196-1 clause 25.3 figure 17 and IEC60309-1 clause 23.3, It is used to test tension and torque on the electric vehicle plug and vehicle connectors provided with a flexible cable, it shall not be possible to...
Pego Electronics (Yi Chun) Company Limited
|
CCS2 150A Iec 62196 2 Electric Vehicle Charging Plug
|
Fast charger CCS2 150A Electric Plug Type2 iec 62196-2 EV plug in Charging Connectors Electric Performance Rated Current: 80 125 200 250Amp Operating Voltage 750V DC Insulation ......
Deligreen Power Co.,ltd
|
