IEC 61386-21 Figure 103 Bending Apparatus For Non-Metallic And Composite Conduit
|
IEC 61386-21 Figure 103 Bending Apparatus For Non-Metallic And Composite Conduit Product information: This testing machine is suitable for bending test of metal conduits and other materials, with a bending angle of 90°. Comply with the requirements of Clause 6.6 and Figure 9 of JG3050-1998 "Insulated Electrical Bushings and Accessories for Buildings", "GB 20041.21......
Sinuo Testing Equipment Co. , Limited
|
IEC 61386-21 HDG Rigid Metal Conduit(RMC) IEC Rigid Pipe 40mm
|
... from magnetic fields, impact damage and crushing. IEC Rigid conduit has much thicker walls than IEC EMT, and is more expensive as a result. But the thickness of rigid conduit makes it perfect for outdoor installation. Rigid conduit will continue to do...
Hefei Elecman Electrical Co., Ltd.
|
IEC 61386-21 Electrical Metallic EMT Conduit Pipe Non Thread Steel
|
...conduits and fittings Scope: IEC 61386-21 is part of a series of standards that covers electrical conduit systems and their components. This particular standard, IEC 61386-21, focuses on the requirements and specifications for EMT conduit in chile market ....
CHANGSHA ELEWELL IMPORT&EXPORT CO.,LTD
|
EMT Conduit Tube IEC 61386-21 Electrical Metallic
|
EMT conduit Tube IEC 61386-21 Electrical Metallic Tubing Conduit from China Description: IEC 61386-21 emt conduit EMT conduit pipe is one of the lightest and thinnest unthread conduit pipe .The pipe head has no thread, and it is connected with set ......
TOPELE ENTERPRISE CO.,LTD
|
manual IEC Test Equipment IEC 60811 Cold Bend Test Apparatus For Cables Sheaths And Insulation
|
... bending performance of wire and cable at low temperature. The equipment is mainly composed of low temperature thermostat, winding device and material testing system. It is ......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60598-2-21 Figure 2 Cold Bend Test Apparatus To Measure Dynamic Bending Performance Of Wire And Cable
|
IEC 60598-2-21 Figure 2 Low-temperature Winding Test Machine Overview Product description This Cold bend test apparatus is used to measure the dynamic bending performance of wire and cable under low temperature conditions, and is suitable for outer diameter less than or equal to 12.5mm round wire and cable or round insulated wire core is the wire and cable industry to test the bending......
KingPo Technology Development Limited
|
Manual Control 60811 IEC Test Equipment Cold Bend Testing Apparatus
|
... Methods for general application-Test at low temperature clause 8.1 and 8.2 and figure 1. Figure 1 Cold Bend Test Apparatus Application: This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 60702-1 Clause 13.6 Electric Vehicle Cables Bending Test Apparatus
|
... to the standard requirement of IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to ......
Sinuo Testing Equipment Co. , Limited
|
AC220V 50HZ Power Cord Flexing Test Apparatus With Digital Display
|
...Adjustable Bend Angle Product information: This test apparatus checks the protection of the supply cord where it enters the appliance. It conforms to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a ......
Dongguan Kingpo Technology Limited
|
AS/NZS3112 Figure 2.8 Pin Bending Test Equipment
|
AS/NZS3112-Figure 2.8 Application of force for pin bending test AS/NZS3112-Figure 2.1 (in part) dimensions of plugs AS/NZS3112-Figure 2.2 Apparatus for flexing test AS/NZS3112-Figure 2.3 Form of pin AS/NZS3112-Figure 2.4 Dimensions of insulaton on ......
Guangzhou Shice Equipment Co., Ltd.
|