Flammability Testing Equipment Horizontal Vertical Flame Tester For Fire Hazard Testing
|
...Vertical Flame Tester for Fire Hazard Testing Standard: UL94 Test for Flammability of Plastic Materials for Parts in Devices and Appliances; IEC 60695-11-2 Fire hazard testing - Part 1 1 -2: Test f1 ames - 1 kW nominal pre-mixed flame - Apparatus , confirmatory test arrangement and guidance; IEC 60695-11-3 Fire hazard testing – Part 11-3: Test flames – 500 W flames......
Guangzhou HongCe Equipment Co., Ltd.
|
ISO 1210 Horizontal/Vertical Flame Tester for Polymer Material IEC 60707
|
...Vertical Flame Test Machine Introduction UL94 flame test machine is designed according to plastic Materials flammability test method. It is used to test flammability, burning rate, flame spread, burning flame retardancy. This machine has high degree of automation, and its test data is accurate. Standards UL94 IEC 60695-11-10,IEC......
Advanced Instruments Co.,Limited
|
IEC 60332-3-10 2000 IEC 60332-3-21~25 2000 Fire Testing Equipment Bunched Wires Vertical Flame Tester BWV
|
IEC:IEC 60332-3-10:2000,IEC 60332-3-21~25:2000 Bunched Wires Vertical Flame Tester BWV Bunched Wire Vertical Flame Spread Tester is a series conforming to IEC 60332-3-10 (Category A~D) standards. The test measures the expansion of vertical flame to the electronically or optically vertical......
SKYLINE INSTRUMENTS CO.,LTD
|
IEC 60332 Single Cable Vertical Flame Tester , 45degree Flame Spread Test Machine
|
IEC 60332 Single Cable Vertical Flame Spread Tester Description: Single Cable Vertical Flame Spread Testing Machine is the most widely used and lower cost of cable fire performance test equipment; It meets the standards IEC 60332-1-1:2004 in the provisions of technical indicators and requirements. Single cable combustion Tester is used to test the flame......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
BVC Bunched Cable Vertical Flame Tester
|
...Vertical Flame Tester -- Model BVC Introduction: Bunched Cable Vertical Flame Spread Tester is a series conforming to IEC 60332-3-10 (Category A~D) standards. The test measures the expansion of vertical flame to the electronically or optically vertical cable or wire using the standard ignition source while supplying a certain amount of air to a chamber of a defined volume. Additionally, if bunched cable vertical flame spread testers...
Delta Technology (Chongqing) Co., Ltd.
|
IEC 60695 Needle Flame Flammability Testing Equipment Automatic 800VA
|
Needle Flame Tester Testing Machine Wire And Cable Burning Resistance Requirements: Faults in the product such as fault currents flowing through the leakage path, overheating of components or parts, poor contact, etc. may cause a flame, which may then be ......
DONGGUAN YUYANG INSTRUMENT CO.,LTD
|
0.5 M3 UL746A IEC 60695 Hot Wire Tester Machine
|
UL746A ZY6055 Wire Testing Equipment Hot Wire Tester Machine IEC 60695 Scope of application: The parts of an insulating material or other solid combustible materials that are easy to spread fire within the device may be ignited by a hot wire or a hot ......
Dongguan HOOHA Electrical Machinery Company Limited
|
IEC60695-11-4 50W Flammability Testing Horizontal and Vertical Flame Tester
|
IEC60695-11-4 50W Flammability Testing Horizontal and Vertical Flame Tester 1. Introduction The Horizontal and Vertical Flame Tester is designed according to the requirements of IEC60695-11-4, GB/T 5169.22, IEC60695-11-10, GB/T 5169.16, GB/T2408, Section ......
Pego Electronics (Yi Chun) Company Limited
|
GB/T5456-2009 Vertical Flame Tester Flammability Testing Machine For Fabric 26mm
|
...Vertical Flame Tester Flammability Testing Machine For Fabric 26mm Test standard GB / T5456-2009,ISO6941 : 2003 Technical parameters Technical Index HD-W821 Control method 7-inch color touch screen, can set and display ignition time and flame spread time Machine size 410mm(W) X 900mm(H) X 380mm(D) Ignition time 0 ~ 999.9s can be set Flame spread time 0 ~ 999.9s can be set Flame angle 30 º& 90° Flame......
Haida Equipment Co., Ltd
|
IEC 60332 Vertical Flame Propagation Test For Single Insulated Cable With PLC Control
|
... IEC60332-1-2, IEC60332-1-1, IEC60695-11-2, IEC60332-1-3 and customized requirements, and is used to test single wire and cable or optical cable products vertical burning test to determine the burning characteristics of its...
Sinuo Testing Equipment Co. , Limited
|
Submit your “iec 60695 vertical flame tester” inquiry in a minute :