High Temperature Melt Flow Index Tester With Electronic Loading For Plastic Material Flow Rate Measurement
|
... high polymer under high temperature according to test methods of GB/T3682, ISO1133, ASTM D 1238-2010. It is used to determine the melt flow rate of high polymer such as PE, PP, POM, ABS, PC, nylon and Fluor plastics, etc. It is widely supplied to...
Beijing Jinshengxin Testing Machine Co., Ltd.
|
High Temperature Resistant Hot Press Adhesive 150℃~260℃
|
...melt adhesive synthesised from a special resin, can be coated on PET, PVC or PEI, no initial adhesion at room temperature, high temperature pressure can be very good mutual adhesion of the hot melt adhesive, a wide range of applications, strong adhesion and other advantages. Application Specification Name KL-17 Hot Melt......
Shenzhen KangLiBang Technology Co., Ltd
|
High Precision Roots Flow Meter Gas Flowmeter for Industrial Gas Measurement Biogas LPG CNG/Industrial Rotary Lobe Flowmeter for Gas, Air, Biogas, LNG Measurement Stainless Steel Body
|
Product description The intelligent gas waist wheel (Roots) flow meter is a new generation of flow meter that integrates the detection functions of flow, temperature and pressure, and can automatically compensate for temperature and pressure. Gas is a ......
Xi'an Yunyi Instrument Co., Ltd
|
Inconel 713C UNS N07713 Bar for Gas Turbine Guide Vanes with High-Temperature Strength and Creep Resistance
|
... high-performance Inconel 713C (UNS N07713) bars specifically engineered for gas turbine guide vanes. These components operate in one of the harshest environments in modern industry—exposed to extreme temperatures, high-velocity gas flow, oxidation......
Changzhou DLX Alloy Co., Ltd.
|
High Precision Temperature Control Melt Flow Index Rate Tester Easy Operation
|
High Precision Temperature Control Melt Flow Index Rate Tester Easy Operation Specifications Melt Flow testing machine 1.Melt Flow Indexer is used to determine melt-mass flow rate . 2.High quality,melt indexer 3.Direct factory 1.Melt Flow testing for PP and PE 1.Melt index tester is used to determine melt-mass flow rate (MFR). 2.High quality,melt indexer Electronic MFR Plastic Melt Flow Index Testing Instrument 2.Principle: Thermoplastic melt...
Dongguan Liyi Environmental Technology Co., Ltd.
|
ISO 1133 ASTM D1238 MFI Testing Machine Melt Flow Indexer Electronic Loading Melt Flow Index Tester Price
|
...testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR/MVR value, it is suitable for high temperature of polycarbonate, aromatic sulfone,...
DONGGUAN LONROY EQUIPMENT CO LTD
|
XNR-400D Plastic Melt Flow Indexer / Plastic Melt Flow Rate MFI Tester
|
...melt flow rate properties of thermoplastic (such as PE, PP, POM, ABS, PC, nylon and Fluor plastics, etc) under high temperature, according to test methods of GB/T3682, ISO1133, ASTM D1238 test standard. It is widely supplied to the production factory and...
Wuhan Bonnin Technology Ltd.
|
MFR Melt Flow Index Machine , Electronic Plastic Testing Instrument
|
...Melt Flow Index Machine , Electronic Plastic Testing Instrument Brief introduction 1.Purpose: Melt flow rate tester (also known as melt index meter) was measured under certain conditions thermoplastic melt flow rate of the special equipment. With the determination of melt flow rate MFR, measured melt volume rate MVR, measured melt density ρ, measured melt flow rate ratio FRR and other functions, this machine high precision temperature...
Guangdong Haida Equipment Co., Ltd.
|
Plastic Melt Flow Index Tester, Digital Melt Flow Indexer Price
|
Melt Indexer Price,Melt Flow Index Tester Product Description Equipment Overview 1. The heating cylinder is made of Hastelloy to avoid oxidizing and rusting at the high temperature (up to 400-500 degrees) for a long time. 3.Dual sensor configuration, precise temperature control, better temperature......
Shanghai Glomro Industrial Co., Ltd.
|
GB / T3682 Digital Plastic MFI Melt Flow Index Test Equipment for ABS Resin , Nylon
|
... the melt flow rate of thermoplastics (MFR; units: g/10min) instrument. For polyethylene, polypropylene, polyoxymethylene, ABS resin, polycarbonate, nylon, plastics and other polymers fluoride melt flow rate at high temperature determination. How it works:...
Dongguan Zhongli Instrument Technology Co., Ltd.
|
Submit your “high temperature melt flow indexer” inquiry in a minute :