Sodium Sulphate Na2SO4 Sodium Sulfate Powder For Synthetic Detergents / Sodium Silicate
|
Na2SO4 Used as a raw material for the production of synthetic detergents and sodium silicate Product Introduction: Sodium sulfate, an inorganic compound, also known as sodium sulfate decahydrate or saltpeter, is a high-purity, fine-grained anhydrous ......
Sichuan Xinyun Jinhong Technology Co., LTD
|
Colorless Rhombic Crystal Or White Powder Magnesium Sulfate Anhydrous For Printing And Dyeing Industry
|
Factory 99% Purity Powder and Granular Magnesium Sulphate Anhydrous with ISO 9001 ISO 14001 FDA Reach Other Attributes Product Name Magnesium Sulfate Anhydrous CAS NO. 7487-88-9 Product Grade Agricultural Grade Appearance Colorless Rhombic Crystal Or White......
Shandong Aoxincheng Chemical Co., Ltd.
|
Low Thickening Precipitated Silicon Dioxide 99% Purity For Printing Inks
|
...Thickening Precipitated Silicon Dioxide As White Powder Used For Printing Inks Description Precipitated silica can be prepared by treating rice husk with Sodium sulphate to produce Sodium silicate, which is then dissolved in water and reacted with ......
Guangzhou Quanxu Technology Co.,Ltd.
|
Textile Printing Thickener CMC CarboxyMethyl Cellulose Sodium CMC
|
CMC Textile Printing CVH12 Sodium CarboxyMethyl Cellulose CMC For Dying Industry 1. Product description Natural cellulose is the most widely distributed and most abundant polysaccharide in nature, and its sources are very rich. The current modification ......
Dongying Linguang New Material Technology Co., Ltd.
|
Underground Pipelines Corrosion Cast Magnesium Anode With Backfilled , Cables 7.7 Kgs 17 lbs
|
... composition: Powered Hydrated Gypsum 75 % Granular Bentonite 20 % Anhydrous Sodium Sulphate 5 % The anode and backfill are contained in a permeable cotton cloth bag. · Environment-friendly · Bare Mg anodes are assembled with cable and the joints......
China Hunan High Broad New Material Co.Ltd
|
Magnesium Anode Rods Mg Alloy Sacrificial Anode Az63
|
... interface, and pack the anode in a cloth bag filled with an electrically conductive filling of 75% gypsum powder, 20% bentonite clay, and 5% anhydrous sodium sulphate. Technical Requirements and Standards ()Chemical composition (by mass) Type Alloy...
Huona (Shanghai) New Material Co., Ltd.
|
Submit your “dying printing sodium sulphate anhydrous” inquiry in a minute :