Load Wire Bending Tester 10°-180° Manually Adjustable ±1° JD-3001F
|
... and other related standards "General safety requirements for cord components and power cords". Applicable to the relevant manufacturers and quality inspection departments to bend the...
Dongguan jie dong test equipment co.,LTD
|
ISO 672 DIN 72551 Automobile Wiring Combustion Testing Machine JIS 3005 Wire Flammability Tester
|
...h as QC/T703-2005, SAE-J 1128-2005, DIN 72551, and ISO672 ISO 672 DIN 72551 Automobile Wiring Combustion Testing Machine JIS 3005 SAE J1128 Automotive Wires Flammability Tester Technical Specification Test chamber - Sealing: Sealed structure - Dimensions:...
DONGGUAN LONROY EQUIPMENT CO LTD
|
Wire Bending Test Machine/ Plug Lead Bending Tester/ Plug Bending Tester
|
Wire And Cable Lead Bending Tester This tester complies with UL817 and other relevant standards "General Safety Requirements for Flexible Cord Components and Power Cords". It is suitable for power cords and DC cords to conduct bending test by relevant manufacturers and quality inspection departments. This machine specializes in testing plug lead wire and cable bending......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
IEC 60884-1 Bending Test Apparatus bend tester without screw thread
|
...Bending Test Apparatus bend tester without screw thread Production introduction: According to the provisions of IEC 60884-1, GB2099.0-1996,12.3.12 provisions of the non threaded terminal bending testing machine. The test machine without screw thread is mainly used for the bending test and the pressure drop of the wire after the wire......
Guangzhou HongCe Equipment Co., Ltd.
|
Electric Drive Cable Bending Tester For Cable Bending / Swinging / Loading Test
|
... Weight 87kg Volume 91×55×99cm Test standard UL, IEC, VDC Equipment Description: The cable bending tester is used for testing bending resistance of outgoing line of power plug and wires. Fix the wires by fixture and add specific load. During test, the...
KingPo Technology Development Limited
|
UL817 Wire Bending Test Machine 6-Station Flexible Cord Durability Tester
|
...Wire Bending Test Machine 6-Station Flexible Cord Durability Tester Product Introduction: This tester complies with UL817 and other related standards concerning the general safety requirements for flexible cord components and power supply cords. It is applicable to manufacturers and quality inspection departments for conducting bending......
Sinuo Testing Equipment Co. , Limited
|
IEC 60851-3 FCB-I Flat Wire Circular Bending Tester With Two Hosts
|
...wire’s cross section 16mm or less than 16mm, such as enameled wires, paper-covered wires, fiber-glass covered wires, film-covered wires and the responding flat copper wires and aluminum wires. Bending Host NO.1 and NO.2 two hosts Diameter of Flange NO.1...
Dongguan Zhongli Instrument Technology Co., Ltd.
|
Bare Wire Bend And Reverse Bend Tester For Specimen Length Of 300mm
|
...tests of bare wires and metal wires, to detect their plastic deformation performance and failures in repeated bending. Test method: fix one end of the specimen, and the free end along with a predetermined radius of cylindrical surface to do bending test at...
Advanced Instruments Co.,Limited
|
Anti Corrosion Cable Flex Tester , 60c.P.M Cable Bending Tester
|
... Bending Fatigue Test Machine apply for bending endurance test for cable connected with plug.Fix the sample on jig and put the weight at the cable, then to swing the jig right and leftwith the setting ......
Dongguan Wirecan Technology Co.,Ltd.
|
ASTM ISO DIN GB Electronic Tensile Tester / Fiber Universal Material Tester
|
... to ASTM, ISO, DIN, GB etc standards.It is suitable for wide range of material for tension, compression, bending, shearing and low cycle test. With special grips, it can also do very special test as customer’s request.It is for metal, rubber, plastic,...
Hai Da Labtester
|