IEC62196-1 Clause 26.4 EV Plug And Vehicle Connector Cable Bending Test Apparatus For Flexing Test
|
... to IEC62196-1 clause 26.4 figure 20 and table 14, it is applied to do mechanical load flexing test of the non-rewirable accessories of ev plug and vehicle connector. Test method: The sample is fixed to the oscillating member of the apparatus so that at...
Pego Electronics (Yi Chun) Company Limited
|
IEC 60702-1 Clause 13.6 Electric Vehicle Cables Bending Test Apparatus
|
... to the standard requirement of IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to drive the...
Sinuo Testing Equipment Co. , Limited
|
IEC 60227-2 Cable Testing Equipment Bending Test Apparatus For Tinsel Cord 0-1A Output Current
|
...h 60 000 bending cycles, i.e. 120 000 single strokes, interruption of the current shall not occur. Cable Testing Equipment After the test, the sample shall withstand the voltage test carried out in accordance with 2.2 of IEC 60227-2, the voltage, however,...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60702-1 Clause 13.6 Bending Test Apparatus For Mineral Insulated Cables
|
...IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to drive the turntable to rotate. For 500V cables a...
Sinuo Testing Equipment Co. , Limited
|
IEC 60598-2-21 Figure 2 Cold Bend Test Apparatus To Measure Dynamic Bending Performance Of Wire And Cable
|
...Test Machine Overview Product description This Cold bend test apparatus is used to measure the dynamic bending performance of wire and cable under low temperature conditions, and is suitable for outer diameter less than or equal to 12.5mm round wire and cable or round insulated wire core is the wire and cable industry to test the bending......
KingPo Technology Development Limited
|
800W Cable Bending Test / Flexing Test Apparatus Six Station 800 Watt
|
Wire/Cable Bending Tester (MY-XC-C6), Sheet metal material with white color Description This testing machine is customized according to the "General Safety Requirements for Communication Cord and Power Cord" and is written by advanced touch screen. PLC ......
Shenzhen Mingyu Instrument And Equipment Co., Ltd.
|
IEC60851-3 Bending Test Apparatus For Flat Wires With Test Bars
|
...bending test apparatus is applicable to the bending test of various enameled flat wires, paper wrapped flat wires, glass fiber wrapped flat wires, film wrapped wires and other electromagnetic wires with a wide edge of less than or equal to 16mm, as well as the corresponding copper and aluminum flat wires. Major Technical Parameters Bending......
Advanced Instruments Co.,Limited
|
Cable Bending Cycle Testing Machine For Multi Wire Cable Bending Test
|
... cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable if conducting after some...
Infinity Machine International Inc.
|
6 Station Wire Testing Equipment For Robot Cable Bending Test Cria 0003.2
|
...Cable Bending Testing Equipment, 6 Station CRIA 0003.2 Wire Testing Equipment Application: The robot cable bending testing equipment conforms to TUV, VDE and UL. It can be used to test bending of the robot cable, flexible cable, bending flexible cable, drag chain cable, chain bend and high flexible cable. The machine is a six-station structure, which is mainly used for repeated bending test......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Figure 2.8 Plug Socket Tester Pin Bending Test Apparatus
|
...Bending Test AS / NZS 3112 Figure 2.1 dimensions of plugs Figure 2.2 apparatus for flexing test Figure 2.3 form of pin Figure 2.4 dimensions of insulation on insulated live pins Figure 2.5 pressure test apparatus for insulation on insulated plug pins at high temperature Figure 2.6 impact test apparatus for insulation on insulated plug pins at low temperature Figure 2.7 abrasion test apparatus......
Guangzhou Shice Equipment Co., Ltd.
|
Submit your “cables bend test apparatus” inquiry in a minute :