Home > Consumer Electronic > Smart Electronics > Smart Home >

Bs1363 1 Plug Socket Test Apparatus

1-10 Results for

bs1363 1 plug socket test apparatus

from 13 Products

IEC 60884-1 Fig 18 and Fig 19 Verification Force Plug Socket Test Apparatus

...Plug Socket Tester Apparatus Product details: This Tester is designed to meet the exacting requirements of major international standards such as IEC 60884-1 Fig 18 and Fig 19. It is used to test whether the maximum force of pulling the plug from the socket and the minimum force of pulling the single plug pin from the plug......

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

BS1363 Figure17a Plug Socket Tester For Temperature Rise

BS1363 Figure17a Test Apparatus For Temperature Rise Test Parameters: Standards BS1363 Figure 17a Function For temperature rise test Test cabinet Meterial 10mm nominal plywood Test cabinet Finish Two coats of matt paint. BS4800 colour no.08 C35. Dimensions......

Guangzhou Shice Equipment Co., Ltd.

Address: #1,chencongxi10xiang,chencongcun,qiaonanjiedao,panyu,Guangzhou

Manual 300N Compression Test Apparatus Plug Socket Test Equipment

....1, 24.5 and figure 8 Each specimen of plug or portable socket-outlet is then pressed between two flat surfaces with a force of 150 N for 5 min, as shown in figure 8. The specimen is checked 15 min after removal from the test apparatus, and shall not show...

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China

Test Pin with Diameter 1mm as Per BS1363-1 Figure 1 for Plug Socket Test

Test Pin with Diameter 1mm as Per BS1363-1 Figure 1 1. Introduction The test pin is designed according to BS1363-1 figure 1 & clause 12.6.1, BS1363-2 figure 1 & clauses 9.2.1, 12.8.1, 13.7.1, 20.1.4, and BS1363-3 figure 1 & clauses 9.2.1, 12.8.1, 13.7.1, 20.1.4, and BS1363-5 figure 1 7 clauses 12.5.1.5, 12.5.2.2.2, for checking the openings of the BS plugs and socket......

Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

IEC60598-1 Luminaries Test Equipment Direct Plug In Test Apparatus

... of the plug-in device with plug-in pin on the socket during normal use is within the specified range. Compliance: It is suitable for testing the torque exerted on the output socket by the device which is to be inserted into the fixed output socket and is...

SKYLINE INSTRUMENTS CO.,LTD

Address: No.1802 Room 6# Building Universal Commerce Center Nancheng District Dongguan Guangdong China

IEC 60884-1 Figure 21 Plug Socket Tester Apparatus For Flexing Test 10-60rpm

... requirement of IEC 60884-1 figure 21, which is used to process the bending test for the power cord of non rewirable plugs, appliances and similar electrical appliances (electric tools). The device can be preset test times (up to 999999), it can carry out...

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

Plug Gripping Test Apparatus For VDE Type Plugs Sockets IEC 60884-1 2022

... to IEC 60884-1: 2022 Annex C alternative gripping tests figure C.2, the reference plug as per C.1 also below shown: Technical Parameters For Plug Gripping Test Apparatus: Item Specifications A reference plug The reference plug should be made according to...

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

Connection Plug Torque Test Apparatus for Devices forming a part of the MAINS Plug

...testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with IEC 60065 clause15.4.1 and figure 11, IEC 60335-1 clause 22.3, IEC 60884-1 clause 14.23.2. The balancing arm of the test apparatus pivots about a horizontal axis through the center lines of the contact tubes of the socket-outlet at a distance of 8 mm behind the engagement face of the socket......

HK LEE HING INDUSTRY CO., LIMITED

Address: 7F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China

Factory Sell! Ball pressure test apparatus of BS1363 figure 24

.... Our main line covers Accessibility Probes, Test Chamber, Weight Sensor, Load Cell, Electrical Ruler, Glow Wire Tester, Spring Impact Hammer, Electrical Safety Tester Series, Environment Tester, Universal Testing Machine, Socket-outlet Gauges Series and...

HongKong Bonad Technology Limited

Phone: 86-755-66608016

Address: #301,Hong Du building,45 district ,Bao'an ,shenzhen,Guangdong,China

BS1363 Lithium Battery Testing Equipment Plug Socket Measuring Gauge

BS1363 Lithium Battery Testing Equipment Plug Socket Measuring Gauge BS1363 Plug Socket Measuring Gauge They are the necessary testing devices used in the laboratory and measurement test department. The specific measuring gauges are included as follows: GB1002-2008 measuring gauge: No. Name Standard figure quantity remarks 1 Measuring gauge for single phrase two-pole socket......

Dongguan Kingpo Technology Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

Submit your “bs1363 1 plug socket test apparatus” inquiry in a minute :

*From:	Your email address is incorrect!
To:	Dongguan Kingpo Technology Limited Products: BS1363 Lithium Battery Testing Equipment Plug Socket Measuring Gauge
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “bs1363 1 plug socket test apparatus” inquiry

*From:
Your email address is incorrect!
To: KingPo Technology Development Limited
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0