ASTM A249 TP304 Wound L Type Tube For Bolier Heat Exchanger
|
.... These tubes meet the standards outlined by ASTM A249, which specifies the requirements for welded austenitic stainless steel tubing for high-temperature and general corrosive service. Key Features Material: TP304 (Type 304 stainless steel), an...
YUHONG HOLDING GROUP CO., LTD
|
ASTM A249 TP304 Wound L Type Tube For Bolier Heat Exchanger
|
ASTM A249 TP304 Wound L Type Tube For Bolier Heat Exchanger ASTM A249 TP304 has excellent corrosion resistance in ordinary atmospheric conditions, making it suitable for a wide range of ......
YUHONG HOLDING GROUP CO., LTD
|
ASTM A179 Carbon Steel Wound L Type Fin Tube With Aluminum Fins For Oil Fire Furnace
|
...Wound L Type Fin Tube With Aluminum Fins For Oil Fire Furnace ASTM A179 Carbon Steel L Type Fin Tube is a fin tube made of aluminum fin strip wounded into an L-shaped spiral under tension and wrapped tightly around the outer surface of the base tube. The tension in fin strips of the L Type Fin Tube wraps around the tube, causing the fin feet to press forcefully against the base tube, holding the fins firmly in place. L Type...
Yuhong Group Co.,Ltd
|
ASTM A249 TP304 Austenitic Steel Wound L Type Fin Tube For Air Cooler
|
Wound L Type Fin Tube ASTM A249 TP304 For Heat Exchanger & Air Cooler Product Specifications Base Tube Material TP304 Base Tube Standard ASTM A249, ASME SA249 Type Wound, L type, LL Type, KL Type Application Air cooler, Cooling Tower, Heat Exchanger, Condenser Fin type L Type Fin Tube, LL Type Fin Tube, KLM Fin Tube......
YUHONG HOLDING GROUP CO., LTD
|
DELLOK Seamless Tension Wound KLM Type Structural Aluminum Tubing
|
... and copper) is folded into an L SHAPE and wound onto the base tube surface under tension. The feet of the fins are joined together and cover the finned surface.Both bare ends shall be Zinc or Aluminum metalized applied by an ......
Dellok Yonghui Radiating Pipe Manufacturing Co.,Ltd.
|
WPU IV Cannula Fixation Transparent Dressing/ Wound Dressing Types
|
...wound dressing types Product Description It is a new patch for external use, which based on the infusion patch (one of our products). when you are transfusing, you can use it to fix the needle tubing. [Special materials] Microporous polyester non-woven Fabric, Absorbent pad, Low allergy medical adhesive, release paper [Function] it can fix the needle tubing......
Wuhan Huawei Technology Co., Ltd.
|
Fin Cooler L Type Wound Finned 40mm Wt Heat Exchanger Tubes
|
Tube Fin Type Tube-Fin Cooler L-Type Wound Finned Tube L-type wound finned tube: aluminum fin or copper fin is folded into an L shape and continuously spirally wound on the outer surface of the base tube under the action of tension. High operating temperature: 150 °. Ll type wound finned tube: on the basis of L type, the fin root completely covers the outer surface of the base tube; To some extent, this fin type......
TORICH INTERNATIONAL LIMITED
|
A192 SMLS Carbon Steel H Fin Bolier Square Fin Tube of Waste Heat Recovery Unit
|
...Bolier Tubes of Waste Heat Recovery Unit Description: General H type Fin production capacity General specifications of H type fin tubes Production Facility: 6 finning machines; Daily capacity up to 20 tons; Tube OD: 73 mm max. Tube Length: 18 meters max. Fin Thickness: 1.5mm ~3.5mm Fin Pitch: 10mm Min. More Tubes Materials ASTM A179 / A179M : Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes...
JIANGSU RELIANCE THERMAL EQUIPMENT CO., LTD
|
Disposable Basic Dressing Set Wound Care Sterile Wound Dressing
|
...Wound Care Sterile Wound Dressing Product Introduction Structural composition: composed of polyvinyl chloride drainage tube and polyvinyl alcohol foam sponge; The material is divided into A type and B type, and A type is a built-in drainage tube, which is used with medical semi-permeable membrane, silicone joint, tee, and tube clamp; Type B is an external drainage tube used with medical semi-permeable membranes, tube...
Shandong Chuangkang Biotechnology Co., Ltd.
|
Carbon Fiber Epoxy Resin Filament Wound Products for Wheels Rims Mast Structures Shafts Ring Truss Furniture
|
..., Matte finish, or without surface treatment Shapes Round tubes, square tubes, rectangular tubes,hexagon tubes,octagonal tubes etc Max OD. 150mm+/-0.15mm Max Length 1,000mm+/-0.1mm Thickness Customized Tolerance of OD. and ID. +/-0.1mm Materials ......
Zhongshan Carbon Composite Material Products Co., Ltd.
|
Submit your “bolier wound l type tube” inquiry in a minute :