JISG3302 Cold Rolled Hot Dipped 1.5mm Galvanised Steel Sheet For Exterior Decoration Of Auto And Train
|
...Galvanised steel sheet For exterior decoration of auto and train Galvanised Corrugated steel sheet specifications : Technical Standard EN10147/EN10142/DIN 17162/JIS G3302/ASTM A653 Type Coil/Sheet/Plate/Strip Thickness 0.12-6.00mm,or customer's requirement Width 600mm-1500mm,according to customer's requirement Type of Coating Hot Dipped Galvanized Steel(HDG)/Zinc Coated Steel(Electro-Galvanised Steel......
Shanghai Huiyi International Co., Ltd.
|
DX51D Z250 5mm Galvanised Steel Sheet 1800mm Length Flange Plate SGCD PPGI
|
...Steel Sheet 1800mm Length Flange Plate SGCD PPGI Product Description: Galvanized steel is to prevent the steel plate surface from corrosion to extend its service life, in the steel plate surface coated with a layer of metal zinc, the zinc coated steel plate are called galvanized sheet. Galvanized sheet packing into cut into specified length of galvanized sheet and coil galvanized sheet packing two kinds.General sheet......
Jiangsu Lianzhong Metal Products (Group) Co., Ltd
|
Anti Corrosion 1.5mm Galvanised Steel Sheet 8x4 ASTM A36 Slit Edge
|
.... A sheet of steel is dipped into a molten zinc bath so that it adheres to a sheet of zinc on its surface. At present, the continuous galvanizing process is mainly used for production, that is, the steel plate into a roll of continuous immersion in the...
SHANDONG TONGMAO SPECIAL STEEL CO., LTD
|
SGS 4mm 5mm Galvanised Steel Sheet 2A06 LY6 Aluminium Flat Plate
|
2A06 (LY6) Aluminum sheet plate Aluminum Plate is a large category in aluminum alloy field. It is a general term. Project Introduction Aluminum Sheet / Plate Grade: 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000series Thickness: 0.20mm - 500mm Width: up......
Jiangsu Vespolari Steel Import & Export Co., Ltd.
|
Stock SGCC DX51D 1.5mm Galvanised Steel Coil For Roofing Sheet
|
... designed for roofing applications. The SGCC (Steel Grade Commercial) indicates the grade of the steel used, which offers good corrosion resistance. The DX51D denotes the coating type and thickness. The 1.5mm thickness provides durability and strength,...
Shandong Chasing Light Metal Co., Ltd.
|
5mm Galvanized Steel Sheet Ms Plates Coil Dx51d Z275
|
...5mm Galvanized Galvanised Steel Sheet Plate Ms Plates Galvanized steel sheet Zinc coated steel sheet is steel that has gone through a chemical process to keep it from corroding. The steel gets coated in layers of zinc oxide because this protective metal does not get rusty easily. The coating also gives the steel a more durable,hard to scratch. Product Description SPECIFICATION PARAMETER Commodity Galvanized Steel Sheet......
Jiangsu TISCO TPCO Metal Products Co.,Ltd.
|
EN10143 Galvanised Steel Sheet In Coils Unoiled Chromated 6+ Used For Floor Deck
|
...Galvanised Steel Sheet in Coils Unoiled Chromated 6+ used for floor deck Hot-dip galvanised steel coil (GI) is made by passing a fully hardened steel sheet, which has undergone a pickling and rolling process, through a zinc pot, thereby coating the surface with a zinc film. Due to the properties of zinc, it offers excellent corrosion resistance, paintability and workability. Typically, the process and specifications for hot-dip galvanised...
Shandong Decho Building Materials Technology Co., Ltd
|
Dx51d Gi Galvanised Steel Sheets Z275 Galvanised Iron Sheet
|
...surface. Galvanizing can increase the corrosion resistance of steel and prolong its service life. The cost of galvanized coatings is lower than other coatings, and the durability is more reliable; strong toughness, can withstand mechanical damage during...
PUMAO STEEL CO., LTD
|
UNS S44002 0.5mm Stainless Steel Sheet 440a Cold Rolled Steel Plate
|
UNS S44002 0.5mm Stainless Steel Sheet 440a Cold Rolled Steel Plate 440A stainless steel sheet ASTM A240 Product Name 0.5mm Stainless Steel Sheet 440a Standard JIS,ASTM,AISI,SUS,UNS,DIN,EN etc Thickness Cold rolled:0.15mm-10mm Hot rolled: 3.......
JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
|
2mm Metal Galvanized Steel Sheet AISI ASTM BS Standard Galvanised Steel Sheet
|
... extends the life of the final product and is ideal for manufacturers. The attractive surface finish also makes consumers satisfied. Hot dipped GI steel sheet & coil is made of carbon steel coated in zinc utilizing the hot-dip process. The end result of...
Qingdao Jero Steel Co., Ltd.
|
Submit your “5mm galvanised steel sheet” inquiry in a minute :