INVAR 36 4J36 Low Expansion Alloy NILO 36
|
... and the expansion rate is very low. And when the temperature goes above this point, it becomes non-magnetic and the expansion rate goes bigger. 4J36 particularly useful in applications where minimum thermal expansion and high dimensional stability is...
Suzhou Xunshi New Material Co., Ltd
|
Invar/ Vacodil36/ Feni36 Precision Alloy 4j36 Low Expansion Alloy Wire 4j29 4j50 Nickel Iron Alloy Kovar Tube
|
... control is required. Kovar Tube maintains a dimensional match with other components, reducing stress and mismatch issues due to thermal expansion, ensuring device accuracy and stable performance. Kovar Tube also offers good processability. It can be made...
Changzhou Victory Technology Co., Ltd
|
High Precision 4J33 Sealing Wire Controlled Expansion Alloy For Hermetic Packaging
|
...hermetic glass-to-metal sealing applications. With approximately 33% nickel and a small amount of cobalt, this alloy offers a thermal expansion coefficient closely matched to hard glass and ceramics. It is widely used in the manufacture of vacuum tubes,...
Huona (Shanghai) New Material Co., Ltd.
|
Invar 36 Foil (Invar) / K93603 / ASTM F1684 strip Controlled Expansion Alloy
|
... CL7UNS K93602/03 4J36 (China), Fe-Ni36 (France), 1.3912, Ni36 (Germany), X1NiCrMoCu, N 25-20-7 (UK) Invar 36, UNSK93600 thermostat alloy, UNSK93601 pressure vessel sheet (USA) Description Invar36 is an iron-nickel alloy containing 36% nickel. Below 204C,...
JINXING MATECH CO LTD
|
Alloy 27_ASTM F-256_UNS K92801_4J28 glass sealed and controlled expansion alloy
|
Alloy 27 ASTM F-256 UNS K92801, 4J28 glass sealed and controlled expansion alloy Note: Glass Sealing UNS K92801 is a glass-to-metal sealing and iron-chromium alloy. Nominally with 28% of Chromium, in forms of strip, bar, wire and rod. It is used primarily for sealing to glass in electronic applications. UNS K92801 should only be considered for use at service temperatures below 300°C. The alloy......
Suzhou Xunshi New Material Co., Ltd
|
FeNi29Co17 Controlled Expansion Alloys / Kovar Capillary Pipe OD 0.2mm-8mm
|
Kovar glass sealed and controlled expansion alloys Kovar capillary has been used for making hermetic seals with the harder Pyrex glasses and ceramic materials Kovar has found wide application in power ......
Ohmalloy Material Co.,Ltd
|
K94800 / Glass Seal 48 Special Alloys For Automotive Nickel Iron Controlled Expansion Alloy
|
Alloy 48 (K94800, W.Nr. 1.3922, Glass seal 48) bar, tube, strip, wire for automotive and industrial electric lamp bulb 1 PRODUCT Nickel iron alloy 48 semi-products for automotive and industrial electric lamp bulbs. Alloy 42 is available in following ......
China Machinery Metal Jiangsu Co., Ltd.
|
4J36 Expansion Alloy Nickel Corrosion Resistance Wire / Strip / Rod / Tube / Plate ASTM
|
...4J36 Corrosion Resistant Alloy Light Rod On Expansion Alloy Product Description and Application 4J36 is a 36% nickel-iron alloy with a thermal expansion rate of almost zero -- about one-tenth that of carbon steel in the temperature range -100°C to 200°C. High strength and toughness retention at low temperatures make it suitable for a variety of low temperature or low expansion applications. The alloy......
Danyang Kaixin Alloy Material Co., Ltd.
|
Low Expansion Alloy 4J36 Precision Alloy Invar36 / 36Н / FeNi36 Rod / Bar for Radio Industry
|
... a rather narrow range of temperature. It has a low coefficient of expansion from cryogenic temperatures to about 260℃. In the dry air at home temperature, invar 36 has good resistance to corrosion. But in moist air, it may go corrosion. ......
Shanghai Tankii Alloy Material Co.,Ltd
|
Aerospace Composite Tooling 4J36 Invar 36 Alloy Materials Plate
|
...36% nickel-iron alloy possessing a rate of thremal expansion approximately one -tenth that of carbon steel at temperatures up to 204℃. Invar is an austenitic alloy. It is strong, tough, ductile and possesses a useful degree of corrosion resistance. It is...
BLOOM(suzhou) Materials Co.,Ltd
|
Submit your “4j36 controlled expansion alloys” inquiry in a minute :