IEC60065 Clause 8.21 Mandrel Test Device 10° And 230° Rotate Angle
|
...following: Three test samples, each individual sample consisting of three or more layers of non-separable thin sheet material forming REINFORCED INSULATION , are used. One sample at a time is fixed to the mandrel of the test fixture (Figure 14) as shown in...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60065 230° Rotating Angle Corrosion-resistance Metal Mandrel Test Apparatus
|
...230° Rotating Angle Mandrel Test Apparatus Product Overview: This test apparatus conforms to IEC60065:2014 clause 8.21, figure 14~16, IEC60558-1 Fig6, IEC 60950 and etc. It is used for tensile and electrical strength verification for non-separable thin layer materials. This test apparatus has the mechanical limits in the position of 0o and 230o to make sure the accuracy of the testing angle......
Sinuo Testing Equipment Co. , Limited
|
Mandrel Electrical Safety Test Equipment 230 Degree Rotating Angle With 150N Load
|
IEC61558 Electrical Safety Test Equipment Mandrel Test Device equipped with 150N load 1. Introduction Mandrel tester device is designed and manufactured in accordance with the standard requirements of IEC61558 and IEC60065. It is used for the insulating......
Pego Electronics (Yi Chun) Company Limited
|
IEC 60950 Communication Test Equipment , Mandrel Test Equipment HX9804
|
...n layer material. Feature:The position of 10°and 230°are set with mechanical limit,not only to ensure the accuracy of the test angle, but also to achieve a simple operation method; weight with a hanging ring, in case of a point is damaged because of too...
shanghai kerang technology co ltd
|
SH8017B The fully automatic petroleum product vapor pressure tester has a rotation angle of 350 °
|
SH8017B Automatic petroleum product vapor pressure tester is designed and manufactured according to GB/T8017 "petroleum product vapor pressure measurement method (Reid method)". Suitable for measuring the vapor pressure of gasoline, volatile crude oil and ......
Shandong Shengtai instrument co.,ltd
|
SH8017B The fully automatic petroleum product vapor pressure tester has a rotation angle of 350 °
|
SH8017B Automatic petroleum product vapor pressure tester is designed and manufactured according to ASTM D323 and GB/T8017 "petroleum product vapor pressure measurement method (Reid method)". Suitable for measuring the vapor pressure of gasoline......
Shandong Shengtai instrument co.,ltd
|
Electric Strollers Testing Machine 100 Degree Rotation Experiment Station
|
...Testing Machine 100 Degree Rotation Experiment Station Testing purposes: the dynamic, the infant carrier or seat fixed on the frame of the device must not break down, loose or may not have any damage in the test or test. Parameters: Design standards EN1888 Control modes manual control Test surface material P-60 sandpaper Angle Modulation Motor Angle Display Digital Angle Accuracy Tolerance <1 degree Maximum weight 100KG Angle...
Dongguan Haida Equipment Co.,LTD
|
UL 2580 Electric Vehicle Battery Pack EESA Rotation Test Equipment
|
... Equipment Overview The battery pack rotation test device is to simulate the battery package/system installed on the electric vehicle. When the car is running at a high angle, such as uphill, downhill, rollover, overturning and other special circumstances,...
Sinuo Testing Equipment Co. , Limited
|
100 Degree Baby Carries Rotation Test Table / Stroller Test Machine
|
...Rotation Test Table Stroller test Testing purposes: the dynamic, the infant carrier or seat fixed on the frame of the device must not break down, loose or may not have any damage in the test or test. Parameter: Design standards EN1888 Control modes manual control Test surface material P-60 sandpaper Angle adjustment Manual Angle Display Digital, Angle Accuracy Tolerance <1 degree Maximum weight 100kg Angle 0 ° - 20 Test...
Hai Da Labtester
|
Multi Condition Horizontal Variable Angle Friction And Wear Testing Machine
|
...angle Friction and Wear Testing Equipment Product Introduction This structural product can achieve forward and reverse rotation, angular rotation and mixed motion. The periphery adopts a closed box, and the power is transmitted to the test ball bearing through a series of power transmission devices. Different motion modes are achieved by controlling different servo controllers. The device......
DONGGUAN LONROY EQUIPMENT CO LTD
|
Submit your “230 rotate angle mandrel test device” inquiry in a minute :