JWELL Nitriding Treatment 38CrMoAlA Extruder Screws And Barrels
|
...Extruder Screw And Barrels 1) 38CrMoAlA(JIS SACM645) 2) 42CrMo(JIS SCM440) 1) 38CrMoAlA(JIS SACM645) 2) 42CrMo(JIS SCM440) Heat-treatment Nitriding treatment Electroplated hard-chrome finish High frequency quenching Spray bimetallic coating Vacuum quenching 1) 38CrMoAlA(JIS SACM645) 2) 9Cr18MoV 1) 38CrMoAlA(JIS SACM645) 2) 9Cr18Mo Heat-treatment Nitriding treatment Spray bimetallic coating Quideline of technique Depth of nitration layer...
CHANGZHOU DYUN ENVIRONMENTAL TECHNOLOGY CO.,LTD
|
Nitriding/Bimetallic Treatment Extruder Screw and Barrel with 0.5-0.8mm Nitrided Layer Thickness and 0.015mm Screw Straightness
|
Product Description: The squeezer screw barrel is a specialized component designed for plastic film washing and drying lines. It is primarily utilized in the dewatering process following plastic recycling. Featuring a screw diameter ranging from 250mm to ......
Zhejiang Alven Intelligent Manufacturing Co., Ltd.
|
Energy Saving PVC Extruder Screws And Barrels 0.5 ~ 0.8mm Nitride Depth
|
Extruder screw barrel and Single Screw Barrel for Plastic Extruder Machine SPECIFICATIONS 15mm-300mm Length/Diameter Ratio:L/D=15-55 Screw can be selected from ordinary,gradual,mutationl,pinned,separating and exhausting types. The compression ratio of ......
Shanghai Bei Yang Plastic Machinery Limited company CO.,LTD.
|
Pp Pe Plastics Injection Molding Extruder Screws And Barrels Accessories
|
Product Description Description The screws and barrels made by our company are highly precise because we use good alloy material, and it processed by the latest technology and inspection equipment of European and US.So our production is endurabale and ......
Jwell Machinery (Changzhou) Co.,ltd.
|
Nitrided Bimetallic Screw And Barrel For Extruder Machine
|
...Nitrided Bimetallic Screw And Barrel For Extruder Machine 1 . Description Barrel Material high-quality alloy structural steel Quenched and tempered hardness HB260-280 Nitriding hardness HV950±50 degrees Nitride layer depth 0.4-0.6mm Brittleness ≤2 levels Screw......
BLOOM(suzhou) Materials Co.,Ltd
|
Single Screw Extruder Screw Barrel with 0.5-0.8mm Nitrided Layer Depth Φ20mm-300mm Barrel Inner Diameter and 800mm-8000mm Screw Length
|
Plastic Extrusion Screw and Barrel Assembly Nitriding Treatment for Increased Productivity Product Description: The Single Screw Extruder Screw Barrel is a high-quality product designed for plastic extrusion applications. This product features a screw ......
Zhoushan Jialong Screw Manufacture Co.,Ltd
|
Customized Φ 20-300 mm plastic extruder screw cylinder
|
...extruder screw cylinder Ordinary nitriding parts, bimetallic pieces: Material used Fushun quality 38CrMoAlA. Ordinary nitriding parts: Screw barrel by quenching and tempering, nitriding, hardness HV850 above, brittleness is not higher than two. Tensile strength: 100kg * n / mm2, yield limit: 85kg * n / mm2 Double metal parts: screw slotted spray alloy, high wear resistance. Screw......
Xi'an GX Mechano-Electronic Co., Ltd.
|
Customized Conical Twin Screw and Double Screw Screw Barrel Set for Electroplating Hard Chromium Layer Plastic Extruder
|
Conical Twin Screw and Barrel Double Screw and Barrel for Plastic Extruder Application Film blower, Cast film machine Screw barrel material 38CrMOALA, SACM645, Sprayed dual alloy, etc. Screw diameter Φ30-Φ150 Aspect ratio L/D=15-35 Overall hardness HRC58°-......
Guangzhou Kaixi Wisdom Valley Technology Co.,Ltd
|
XJD-150×16D Pin Barrel Cold Feed Extruder For Extruding Tire Tread And Rubber Sheet In Manufacturing Plant With Deep Screw
|
XJD-150×16D Pin Barrel Cold Feed Extruder For Extruding Tire Tread And Rubber Sheet Extruder Introduction: 1; Pin barrel: The outer barrel is made of high-quality carbon structural steel, with a 38CrMoAlA high-quality nitrided steel bushing embedded in ......
Qingdao Beishun Environmental Protection Technology Co.,Ltd
|
Single Screw Plastic Sheet Extruder Machine HDPE LDPE HIPS PVC Sheet Extrusion Machine
|
...Extruder Machine Mono-layer and multi-layer sheet extrusion system for up to 5 layers Processing capabilities: PE, PP materials Intruduce of HDPE LDPE PP Sheet Making Machine 1. Single/Two/Three layers is producible 2. Extruder screw adopts special design with efficient mixing function and high plasticizing capacity.The mater of barrel and screw is 38CrMoA1A, the hardness of nitride......
Qingdao Wings Plastic Technology Co.,Ltd
|
Submit your “2 nitrided layer brittleness extruder screw and barrel” inquiry in a minute :