Magneto Single Stage 1X2 Latching Fiber Optical Switch
|
... fast response and ultra-high reliability.These Fiber Optic switches are designed to meet the most demanding optical switching applications. 1X2 Magneto-Optical Switch(Single mode 1550nm) is is applicable for optical fiber communication networks and...
Gezhi Photonics (Shenzhen) Technology Co., Ltd.
|
FC / APC Connector 1X32 MEMS Fiber Optical Switch 1310Nm High Switching Speed
|
...MEMS optical switch 1310 nm FC/APC connector High switching speedA 1x N MEMS Optical Switch.pptx Description: The MEMS Latch Series 1x8 Fiber optic switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a patent pending MEMS......
Shenzhen Jiangfan Communication Equipment Co., Ltd.
|
20ms 1x8 Mems Fiber Optical Switch Non Latching For OADM OXC
|
MEMS OSW is based on micro-electro-mechanical system (MEMS) technology, which achieved low insertion loss and highly repeatability by rotating the mirror of MEMS chip. MEMS OSW is mainly used in optical cross and connection (OXC) system, optical add/drop system, measure instrument system and optical signal monitoring system.The products are Telcordia GR-1073-CORE qualified, and RoHS compliant. Features: ● Compact size ● Fast switch......
Shenzhen Unifiber Technology Co.,Ltd
|
1x2 Mechanical OSW Fiber Optic Switch For System Monitoring
|
1x2 Mechanical OSW Fiber Optic Switch Introduction Olycom's 1x2 Mechanical Fiber Opitc switch is used to turn on and turn off optical signal. The 1x2 Mechanical Fiber Optic Switch is based on Advanced Optoelectronic Integrated Technology. With the development of optical communication, Optical Switch device is the key to a new generation of all-optical......
Shenzhen Olycom Technology Co., Ltd.
|
Smallest Fiber Optical Switch 1x2 Fiber Optical Switch For System Monitoring
|
...channels by redirecting an incoming optical signal into a selected output fiber. GEZHI Photonics’ 1x2 Mechanical Optical Switch support all wavelength at 1260nm~1650nm, it offers ultra-high reliability, low insertion loss, fast switching speed as well as...
Gezhi Photonics Co.,Ltd
|
1x2 Latching 1260-1650nm Fiber Optical Switch FTTx Solutions
|
...1x2 Fiber Optical Switch LP-OSW-1×2 Optical Switch, which is famous for its high performance, low insertion loss and compact dimension: (L)27.0×(W)12×(H)8.2mm. It is an ideal component for OADM,OXC,system monitoring and protection. With compact package, it can be easy to integrate into a high density optical......
Shenzhen linkopto Technology Co. Ltd
|
FSW-1X2-SM Fiber Optic Device 1x2 Non Latching High Stability 2 Years Warranty
|
...Optical Switch FSW-1X2-SM Fiber Optic Device 1x2 Non-latching Optical Switch Features Low Insertion loss Wide Wavelength Range Low Crosstalk High Stability, High Reliability Epoxy-free on Optical Path Latching and Non-latching Applications Optical Network Protection/Restoration Optical Singnal Routing Configurable Optical......
Shenzhen HiLink Technology Co.,Ltd.
|
1X2 Fiber Optic Switch Non-Latching Module Single Mode
|
1X2 Fiber Optic Switch Non-Latching Module Single Mode Features: 1. Low insertion loss 2. Wide wavelength range 3. Low crosstalk 4. High stability and reliability 5. Epoxy-free optical path 6. Latching and non-latching Application: 1.R&D in laboratory 2.System monitoring 3.Configurable OADM 4.Metropolitan area networks 5.Component testing 6.Fiber sensor Pins Definitions Pins Defining Optical......
HTD Fibercom Co., Limited
|
Fiber Optic Switch FSW Device 1x2 Mechanical Optical WDM 850 1310 1550 Test Wavelength
|
... route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its...
COMELINK CO.,LTD
|
Mechanical Fiber Optical Switch SM 1310nm 1550nm 1m 900um 1x1 1x2 2x2
|
...Optical Switch SM 1310/1550nm 1m 900um FC/APC Description 1xN mechanical fiber optic switch manufactured by ANC International Co., Limited connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. The mechanical operation offers ultra-high reliability and fast switching......
ANC International Co., Limited
|
Submit your “1x2 mems fiber optical switch” inquiry in a minute :