2 Holes 3.3L/Min 17r/Min Splash Water Test Chamber
|
JIS D 0203 Rain Spray Equipment ► Description for JIS D 0203 Rain Spray Equipment JIS D 0203 sain spray equipment is manufactured in accordance with the test requirements of R1, R2, S1 and S2 in JIS D0203 test methods for humidity and water resistance of ......
Xi'An LIB Environmental Simulation Industry
|
ISO16750-4 Clause 4.2 Splash Water Test Chamber Simulating Thermal Shock Testing On Vehicle Caused By Ice Water
|
... shock testing caused by ice water. The purpose is to simulate the splashing of ice water into a heating system or component while driving on a wet road in winter. A failure mode is a temperature expansion coefficient that causes mechanical cracking or...
KingPo Technology Development Limited
|
0 To 4℃ Temperature Shock With Splash Water Test Chamber For Automotive Components
|
...n driving through puddles. The test serves to verify functioning of the component when subjected to shock-type cooling by means of water. This happens when driving on water roads during the winter. Failure modes are mechanical cracking of the materials or...
Sinuo Testing Equipment Co. , Limited
|
Stainless Steel Waterproof Test Equipment , Splash Water Test Chamber HH0808
|
Splash Water Test Apparatus HH0808 Standard:IEC60335-2-64:2002 safety of household and similar electrical appliances, particular requirements for commercial electric kitchen machines clause 15.1.1 and 15.1.2, IEC60335-2-36 safety of household and similar ......
shanghai kerang technology co ltd
|
Simulation Environmental Rain Spray Water-Proof Splash Water Test Chamber
|
Rain test chamber The rain test chamber is an environmental reliability testing equipment specifically designed to simulate the natural rainfall environment. By artificially recreating different intensities, angles, and rainfall volumes of rainfall ......
Shanghai Glomro Industrial Co., Ltd.
|
IEC60335-2-64 Clause 15.1.1 IEC Test Equipment Splash Water Test Device
|
...Test Equipment Splash Water Test Device Product information This splash water test device is according to the standard requirement of IEC60335-2-64 clause 15.1.1 and 15.1.2 to manufacture,In addition, IPX1, IPX2, IPX3 and IPX4 appliances are subjected for 5 min to the following splash test. The apparatus shown in Figure 101 is used. During the test, the water pressure is so regulated that the water splashes......
Guangzhou HongCe Equipment Co., Ltd.
|
VW 80000 Thermal Shock Test Chamber Splash Water Test Equipment MBN LV 124-2 K-12
|
MBN LV 124-2 K-12 Thermal Shock With Splash Water Test Equipment Complied Standards & Clauses MBN LV 124-2 2013-08 “Electric and Electronic Components in Passenger Cars up to 3.5t- General Requirements, Test Conditions and Tests-Part 2: Environmental ......
Sinuo Testing Equipment Co. , Limited
|
IEC60335 Splash Water Test Device 0.4Mpa Gauge With Stainless Steel Bowl
|
...Test Equipment Splash Water Test Device Product information This splash water test device is according to the standard requirement of IEC60335-2-64 clause 15.1.1 and 15.1.2 to manufacture,In addition, IPX1, IPX2, IPX3 and IPX4 appliances are subjected for 5 min to the following splash test. The apparatus shown in Figure 101 is used. During the test, the water pressure is so regulated that the water splashes......
Dongguan Kingpo Technology Limited
|
Environmental 100L/Min Rain Spray Test Chamber Iec 60529 2001
|
..., fountain lights, the display, etc. It can also provide references for product design and quality control. Standard Compliance IEC 60529-2001 Rain Test Chamber Parameters Model BE-LY-800 BE...
Guangdong Bell Experiment Equipment Co., Ltd
|
ISO16750-4 ICE Water Spray Test Chamber PLC Touch Screen For Testing Road Vehicle
|
...Water Spray Test Chamber with a Slot Jet for Testing Road Vehicle 1. Introdution The splash water test chamber meets the requirement of ISO16750-4 clause 5.4.2. It can be used for splash water or high temperature test alone, to simulate ice water splashing......
Pego Electronics (Yi Chun) Company Limited
|
