Gem 150W Fiber Optic Lights With 600mm Double Hard Tubes
|
...adjustable Yes and continuous adjustable Length of Tube 600mm Body case metal Voltage 150W Power supply 220V Description: The Optic Fiber light supply the cold light source for the Chelsea Filter, Spectroscpoe usually, as the one with the cold light so the...
Shenzhen Fable Jewellery Technology Co., Ltd.
|
150W Halogen Illumination Fiber Optic Light Source 3000K Color Temperature
|
150W Halogen Fiber Illumination black source for Stereo Microscope Power: 21V/150W, Philips Lamp (Lamp Model No.: 13629) Input Voltage: 176V-265V, 50Hz (110V optional) Color Temperature: 3000K Illuminance: Approximately 100000Lx Filter: Light Blue (Optional: Navy Blue, Red, Green) Optical Fiber Interface: Φ16mm Size: 230mm×101.6mm×150mm Gross Weight: 2.7 kgs (Optical Fiber not included) Net Weight: 2.1 kgs (Optical Fiber......
Chongqing Scope Instrument Co. Ltd
|
Handheld Fiber Optic Tools Optical Laser Source , Fiber Optic Light Source Tester
|
...Fiber Optic Tools Optical Laser Source , Fiber Optic Light Source Tester We can supply brand new of fiber optic power meter and also relation fiber optic test equipment such as fiber optical light source, Laser pen, ODTR, fiber optic fusion splicer machine, etc. We also can supply OEM, ODM servicer for fiber optical......
kocent optec limited
|
150W Fiber Optic Polishing Machine Square Pressurized Polisher For 18~40 Connectors
|
Fiber Optic Polishing Machine Square Pressurized Polisher for 18~40 Connectors at one time Description Fiber Optic Polishing Machines supplied by ANC International Co., Limited are used to polish the end faces of fiber optic products (cables, connectors, adapters, etc.) in order to minimize signal losses due to scattering. Polishing the connector is an important step for the whole fiber optic......
ANC International Co., Limited
|
11mm 12.7mm Head Fiber Optic Light Kavo High Speed Handpiece German Bearing
|
... ball bearing; 2. Triple spray, effective cooling 3. Push button type to change bur 4. Fiber optic light source 6. sterilized in 135℃ to avoid cross-infection. DR-165K Fiber optic handpiece Technical data: Drive air pressure 0.25-0.3Mpa Water pressure 0...
Henan Dorit Biotechnology Co., Ltd.
|
Handheld Fiber Optic Tools Optical Laser Source , Fiber Optic Light Source Tester
|
Handheld Fiber Optic Tools Optical Laser Source , Fiber Optic Light Source Tester Power Supply: This equipment uses disposable or rechargeable AA batteries. It is forbidden to mix them together. Avoid Condensation: Try to avoid the temperature suddenly ......
KOCENT OPTEC LIMITED
|
2.55mm Interface Fiber Optic Light Pen For ATM Fiber System
|
... and faults locator of SM or MM fiber, it is a helpful assistant to dead zone of OTDR, it is also a basic maintenance tool for fiber network, LAN, ATM fiber system and telecom network system. r optic visual fault locator adopts 650nm laser diode as a...
Shenzhen Huayixin Technology Co., Ltd.
|
Luxurious Popular Sky Star Fiber Optic Light Starry Sky Ceiling Light For Decoration
|
... core diameter (~1 mm) and high numerical aperture (NA 0.3 – 0.5). The following figure shows a comparison of a typical POF geometry compared to another well known optical fiber, the Multi Mode Glass Optical Fiber (MM-GOF). It is...
Shenzhen Hicorpwell Technology Co., Ltd
|
fiber optic tester laser fiber optic light pen optical identifier
|
...fiber optic tester laser fiber optic light pen optical identifier Model: HY-16 Length: 21.75cm Product Description: measure laser point fiber optic tester laser optical fiber light pen adopt 650nm laser diode as a light emitting device, the output power can be up to 1mw-30mw. It’s applied to single-mode or multi-mode fiber measurements.It is an ideal tool to test various types of optic fiber patch cords, , ribbon, bundle fiber...
Henan Huachuang Communication Equipment Co.Ltd.
|
23 VAC 50W Fiber Laser Source , Fiber Optic Light Source Air Cooling Pulse Working Mode
|
... q-switched fiber laser.The optimized optical path structure makes the performance of high reflectivity materials more stable.The new optical path scheme and welding process make the beam quality more excellent and meet the application requirements of...
Riselaser Technology Co., Ltd
|
