rustproof test equipment access probes

Brand Name:HJ

Model Number:HT-IPX1-4

Place of Origin:China

...: It is used to indicate the degrees of protection provided by an enclosure against access to hazardous parts, ingress of solid foreign objects. Parameter: It is concluded to the following test probes according to the degree of protection provided by an

Brand Name:YUYANG

Model Number:YY1102

Place of Origin:China

...Testing Equipment ASTM Accessibility Probes Description: Accessibility Probes is used to determine whether any part or component of a toy can be contacted by the probe. The probe simulates the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. Accessibility probes are designed for two age groups: 1. Probe...

Brand Name:SKYLINE

Model Number:SL-S13

Place of Origin:CHINA

...Accessibility Probes, Toys Safety Testing Equipment Product information To determine whether any part or component of a toy can be contacted by the probe. The probe simulates the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. Accessibility probes are designed for two age groups: Probe A for 0-36 months Probe...

Brand Name:HongCe

Model Number:HT-I02

Place of Origin:China

... 12.3 Acceptance conditions The protection is satisfactory if adequate clearance is kept between the access probe and hazardous parts. For the test of first characteristic numeral 1 , the access probe 50 mm diameter shall not completely pass through

Brand Name:DAXIAN

Model Number:DX7004

Place of Origin:China

...Probe Testing Equipment for Children Safety Toys Test Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Probe A: for the children under 3 years old. Probe B: for the children over 3 years old Standard Configuration: Accessibility Probes AB 1 set,Test

Brand Name:TMTeck

Place of Origin:China

REFT Probes for eddy current Flaw Detection Good probe design and proper probe structure can enhance the defect signal which is difficult to detect and make it easy to be detected. With many years of probe production experience, careful design and strict ...

Place of Origin:Beijing

Brand Name:HUATEC

Model Number:TG-3230

Ultrasonic Thickness Gage Ultrasonic Thickness Testing Equipment Ultrasonic Probe HIGH PRECISION ULTRASONIC THICKNESS GAUGE TG3230, ultrasonic thickness gauge, thickness tester TG-3230 is a simple to use, ...

Brand Name:YUYANG

Model Number:YYT008

Place of Origin:China

... the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. Standards: EN 71-1, 16 CFR 1500,

Brand Name:HTI

Model Number:TW-204A/B

Place of Origin:Guangdong,China(Mainland)

Accessibility Probes Toys Testing Instrument Fake Finger Touch Probe Testing Equipment Description: To determine whether any part or component of a toy can be contacted by the probe. The probe simulates the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. Applications: Accessibility probes are designed for two age groups: Probe...

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

...Test Probe EVSE Testing Equipment Equipment Overview This is a precision test finger made in accordance the requirements of IEC 61032 test probe, required by many standard such as IEC 61851-1 clause 8 and 12.4, IEC 60529 IP2, etc. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test...

Brand Name:PEGO GROUP

Model Number:PG-TPC/PG-TPD

Place of Origin:China

...Probes Test Probe C / Test Probe D Ship by Express 1. Introduction: IP code probe is a test probe to verify the degrees of protection specified in IEC60529. Test probe C (test rod) is intended to verify the protection of persons against access to hazardous parts, it is also used to verify protection against access with a tool. Test Prod D (test wire) is intended to verify the protection of persons against access...

Brand Name:kingpo

Place of Origin:china

... A blender container shall not break or crack during normal use. 30.4.4.2 A blender employing a thermoplastic container shall be subjected to the test outlined in 30.4.4.4– 30.4.4.7. 30.4.4.3 A blender employing a glass container shall be subjected to

Place of Origin:China

Brand Name:ALLIED TESTING

Model Number:TP02

... to verify the protection of person aganist access to to harzardous parts of an IP2 code.Also used to verify protection from access with the back of the hand for an IP suffix B code. Standard test finger probe is made of plastic and steel,very precision.

Brand Name:kerang

Model Number:HT-U01

Place of Origin:CHINA

... and UL60950 Fig NAF.1. Application:It is widely used in the enclosure protection test of the electrical equipment. Test sample:Easily accessible enclosure live parts or mechanical parts. Feature:Nylon handle + probe, it is manufactured according to the

Brand Name:SHC

Model Number:SC-IP1X

Place of Origin:China

... for anti-electric shock test when equipped with amphenol connector. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer) .The probe whose model number is with "T" is with

Place of Origin:China

Brand Name:Julixing

...openings to ensure that fingers and objects do not have access to hazardous parts in equipment and machinery. SPECIFICATIONS – Ball Probe 50mm Impact Ball with Handle IP1X: Meets IEC 60529 and is used for protection against access to hazardous parts. –

Brand Name:KingPo

Place of Origin:China

...Accessibility Probe To Hazardous Moving Parts UL1310 Fig.16.4 Accessibility Probe Testing Accessibility To Hazardous Moving Parts Product details: It conforms to standard requirement of UL1310 Fig 16.4(S3252). It is used for testing accessibility to hazardous moving parts such as access...

Brand Name:KEJIAN

Model Number:KJ-6034

Place of Origin:Dongguan,China

220V 50HZ 23KG High Accuracy Probe Method Of Initial Adhesion Test Equipment Standard ASTM D2979. Usage This machine is probe method of initial adhesion test tester, which with compact and exquisite structure, the use of imported sensors and motors, mainly...

Place of Origin:China

Brand Name:HUATEC

Model Number:HD Series

...Testing Equipment 0.2-30KV Porosity Holiday Detectors HD-103 Principle The detector generates a high DC voltage that is applied to the coating surface through a probe. The detector is connected to the substrate via the high voltage returned. When the probe is passed over a coating flaw, then the electrical circuit is completed and current flows from the probe...

Brand Name:Btutest

Model Number:BTU-RT

Place of Origin:Made in China

...power supply at the same time, and preheat the machine for 10-15 minutes. At this time, it is better to put the probe on the black standard plate. 2. Zero calibration: place the probe on the white standard plate, adjust the zero calibration knob on the