run through shaft stepper motor pm

Brand Name:VIC-TECH

Model Number:VSM25B-24S

Place of Origin:China

... type of shafts: run-through shaft, captive shaft and external drive. The step angle is 15°/step, and we also have 7.5°gear ratio for choice. The step length is 0.0254mm, and it means the lead screw travels 0.0254mm when the motor take one single step.

Brand Name:VIC-TECH

Model Number:VSM25B-24S

Place of Origin:China

... type of shafts: run-through shaft, captive shaft and external drive. The step angle is 15°/step, and we also have 7.5°gear ratio for choice. The step length is 0.0254mm, and it means the lead screw travels 0.0254mm when the motor take one single step.

Brand Name:Jkongmotor

Model Number:NEMA17 JK42HS

Place of Origin:Jiangsu, China (Mainland)

...Shaft Stepper Motor With Linear Actuation Like most linear motors, a linear stepper motor is essentially a variation of the rotary design, cut radially and laid out flat. Similar to their rotary counterparts in operation and performance, a linear stepper motor is typically run as open-loop systems and are capable of providing high resolution at high speeds and accelerations. The linear stepper motor

Brand Name:JIUQI

Model Number:25BY45-27

Place of Origin:Jiangsu, China (Mainland)

... customizable front plate available Special features– Lead Screw, gearbox, pinion gear, connectors, shaft modifications Low cost, high efficiency, precise step angle, and low noise JIUQI MOTOR has various Permanent Magnet Steppers(PM Stepper Motors)

Brand Name:XM-Motor

Model Number:1.8 ° 28HS Hybrid Stepper Motor

Place of Origin:CHINA

1.8 ° 28HS Hybrid Stepper Motor (Insulation Resistance 100 MΩ Min. ,500VDC Dielectric Strength 500VAC For 1minute Shaft Radial Play 0.02Max. (450g-Load) 1.8 ° 28HS Hybrid Stepper Motor Basic performance: (Item) (Specifications) (Step Angle 1.8° Temperature...

Brand Name:HPS

Model Number:PLE42-L1

Place of Origin:China

... is used to achieve the purpose of deceleration by meshing with the large gear on the output shaft through a gear with a small number of teeth on the input shaft of the reducer. The reducer will also have several pairs of gears with the same principle to

Brand Name:Jetacon

Model Number:42mm Stepper Motor Kit

Place of Origin:China Mainland

...resistance: 3.6Ω±10 Phase inductance: 3.5mH±20% Holding torque: 0.1 N.m min Starting speed: 500RPM Running speed: 700RPM Insulation resistance: 100mΩ minute Size and Weight: The NEMA 17 stepper motor measures 1.7 x 1.7 inches (42x42 millimeters) and is

Brand Name:HEJIE

Place of Origin:CHANGZHOU,CHINA

..., Monitoring Equipment, Robot, and so on. 2. Product Description: Winding type Delta Hall effect angle 120 degree electrical angle Shaft run out 0.05mm Radial play 0.02mm@450g End play 0.08mm@450g Max. radial force 220N @

Brand Name:SECORE

Model Number:DC42D

Place of Origin:China

... Optional components: planetary/spur/worm gearbox; magnetic/optical encoder; brake; connector Customized shaft dimensions and technical specs. are available upon requested. 42mm diameter PMDC motor, totoally enclosed, proper for those occasions which

Brand Name:Kapa

Model Number:KY-75HP

Place of Origin:China

55kw /75Hp 9.25m³／min Permanent Magnet Variable Frequency Screw Air Compressor 1900*1250*1600MM Description Air End More stable, no mechanical transmission failure:high-efficiency permanent magnet synchronous motor and screw male rotor adopt embedded-...