r6mm telecom test probe

Brand Name:Sinuo

Model Number:SN2210-23

Place of Origin:China

...Telecom Test Probe Product information: The telecom test probe conforms to IEC60950 2013 clause 2.1.1.1, 6.2.1, figure 2C, IEC60065:2014 Annex B, IEC 62151 Figure 3 and UL 6500 figure B.1 and etc. It is used to check whether the bare parts of TNV circuits of information technology equipment have sufficient protection. There is a M6 thread on the end of the handle, through where the test probe...

Brand Name:HongCe

Model Number:HT-I23

Place of Origin:China

...Test Finger Probe Telecom Test Probe End radius with R6 Product presentation of Test Finger Probe: The Telecom Test Probe is a precision tool designed for electronic testing and measurement applications. With its robust and durable construction, the probe is suitable for use in a wide range of environments and conditions, providing accurate and reliable measurement results. Operating Procedures of Test Finger Probe...

Brand Name:kingpo

Place of Origin:china

Telecom Test Probe Usage: Check access to telecommunications voltages. The Telecom Access Probe is required in IEC 60950, IEC 60065, UL and CSA Standards. It is used to check limited access to telecommunications voltages (TNV), mainly telephone jacks and operator areas. Satisfies basic standard for telecom...

Brand Name:KingPo

Place of Origin:China

Product Details Telecom Test Probe Complies With IEC60950 Figure 2C Product information: Telecom test probe complies with IEC60950 figure 2C and UL6500 figure B.1 standards. It is used for the bare parts of TNV circuits of information technology equipment...

Place of Origin:China

Brand Name:Julixing

Model Number:LX-TD15

...Test Probe Telekom Sonde Purpose: Telecom-Test Probe meets IEC60950 Figure 2C and UL6500 Figure B.1 standards. is for the absolute share TNV circuits information technology to see if they provide sufficient protection. Contacts of terminals for TNV CIRCUITS which cannot be touched by the test probe...

Brand Name:HJ

Model Number:HT-I23

Place of Origin:China

IEC60950 / IEC60065 / IEC62151 Test Finger Probe Telecom Test Standard: IEC60950 Information technology equipment-Safety-Part 1-General requirements figure 2C. IEC60065 Audio, video and similar electronic apparatus - Safety requirements figure B1. IEC62151...

Brand Name:WINNER

Place of Origin:CHINA

...m many manufacturers with similar constraints. When selecting a test probe receptacle, the tip choice is the most critical consideration. Detailed illustration of test probe components and construction Various test probe tip types Customization Options At

Model Number:TP11

...test probe,rigid test probe,safety test probe,probe test Model TP11: 75N force test probe,rigid test probe,steel test probe rigid test probe is used to assess protection of persons against access to dangerous parts and to assess the mechanicalresistance of openings in the enclosure or inner separations. rigid test probe is made of high-grade steel in accordance with the standards and conforms the measures of the flexible finger probe

Brand Name:PEAKMETER

Model Number:T3002

Place of Origin:China

...Test Probes And Pen-Typing Lead Probe Wire Features Probe Length: 120mm/Probe Tip Ø2mm Probe Plug: Ø4mm Cross Plug, Right angle type Probe Wire: 22AWG, red/black Length: 800mm Safety Class: EN61010-031, 1000V CAT Ⅱ, MAX 10A DESCRIPTION 10A ULTRA SOFT PROBE TEST Lead Length Probe...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-11

IEC61032 Rigid test probe 11, IEC60529 Rigid test probe 11 Product Description IEC61032 Rigid test probe 11, IEC60529 Rigid test probe 11 Introduction: Bonad offers a wide range of probes to meet the most common standards including those from IEC, EN, UL, ...

Brand Name:Pego Tester

Model Number:PG-IP

Place of Origin:China

...probe C for IP3X testing: Φ2.5 rod-length 100 Test Probe D for IP4X testing: Φ1.0 wire-length 100 Test Probe 1: 500g steel sphere Test probe 2: 15g steel sphere Test Probe A Introduction: Designed according to IEC61032 fig.1, and meet the requirements of

Brand Name:Charter Leader

Model Number:CLP-RF11GSMPM

Place of Origin:China

...test connector adapter RF coaxial test probe The Current Monitoring probes may be used whenever RF current measurements are required. Current measurements are made by placing a current carrying conductor within the “sensing” window of the probe and measuring the probe’s output voltage with an RF detector. Calibration of the probe...

Brand Name:Sinuo

Model Number:SN2110A

Place of Origin:China

...Test Probe 20N Complied Standards & Clauses The test probe confirm to the IEC 62196-1:2022 clause 10.2, figure 9. Equipment Overview The test probe confirm to the IEC 62196-1:2022 clause 10.2, figure 9. Touching the specimen with the end of the probe and then respectively exert the force of 20N until the probe...

Brand Name:SHC

Model Number:SC-F913

Place of Origin:China

...15 0 -0.1 4 Ф25±0.2 5 4 6 Ф10 7 20 Standard Test Probe Kit: IEC61032 Figure 2 Test Probe B standard test finger IEC61032 Figure 16 Test probe 41​ Test Thorn Probe IEC61032 Figure9 Test probe13, short pin Information: This pin is intended to verify the

Brand Name:kerang

Model Number:HT-I20/21

Place of Origin:CHINA

... HT-I21 test probe with 1N force is for testing whether the live parts with the protection of socket can be touched. Test sample:Socket. Feature:Nylon handle + probe. Parameters: 1,Test probe with force of 20N HT-I20: The probe part: 3+0.03 0×1+0.015 0

Brand Name:BOGES

Model Number:BGS-MS156-137-SMA-L

Place of Origin:Dongguan, Guangdong, China

Test Application RF cable Assembly With SMA Male And Test Probe To Hirose MS156 Connector Detail Product Description Frequency: DC~3GHz S.W.R: 1.3 Max. Impedance:　50 ohm Cable: RF 1.37 Cable Connector: MS156 Connector, SMA Male Application: 1. Wireless industries 2. Communication equipment 3. Base stations 4. Telecom 5. Test...

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

...Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing or the internal baffle of the housing. Can be ordered with 10~50N thrust. Can be ordered with 10~75N thrust. Test Finger Usage 1. As shown in the figure, the finger portion of the thrust test

Brand Name:GE

Model Number:IC9-RS

...Probe ultrasonic testing probes repair crtstal 1. Frequency: 5.0-8.0Mhz 2. Compatible system: Voluson S10, Voluson P8 3. Application: OB/GYN & urology 4. original, in good working condition 5. With 90 days warranty Knowledge Point The IC9-RS Real-time 2D Endocavitary Probe...

Brand Name:Lonroy

Place of Origin:China

... inspection to prevent direct contact of handheld tools.It can be customized with a 3 ± 0.3N pushing force. Standards Compliant with the requirements of IEC61032 Figure 2 test fixture C,

Brand Name:YBADDVANCE

Model Number:4MM Test Probe

Place of Origin:China(mainland)

...Probe Clip Power Multimeter Piercing Probes 4MM Test Probes Extension Test Leads Description Heavy Duty Wire Piercing Probe Clip Power Multimeter Piercing Probes 4MM Test Probes Extension Test Leads Specification Product Name Heavy Duty Wire Piercing Probe Clip Power Multimeter Piercing Probes 4MM Test Probes Extension Test...