qsfp to sfp patch cable

Brand Name:Wuhan Etern Optoelectronics

Model Number:QSFP To SFP Optical Fiber Cord

Place of Origin:China

... of MPO terminal 4 channels array. Respectively connect optical port on SFP module via channel order, determine the fiber channel function at LC port in advance, and positioning with duplex chlips in order to the users can ...

Place of Origin:Shenzhen,China

Brand Name:Neuter, OEM

Model Number:CAB-Q-S-1M-A

...QSFP+ 40G SFP+ Twinax Copper Cable / qsfp to sfp breakout cable QSFP+ copper direct-attach cables are suitable for very short distances and offer a highly cost-effective way to establish a 40-Gigabit link between QSFP+ ports of QSFP+ switches within racks and across adjacent racks. These cables...

Place of Origin:CN

Brand Name:OEM

Model Number:YT-4QSFP-3M

...+ passive copper cables are compliant with SFF-8436, QSFP+ MSA and IEEE P802.3ba 40GBASE-CR4. It is offer a low power consumption,short reach interconnect applications. The cable each lane is capable of transmitting data at rates up to 10Gb/s, providing an

Brand Name:Gvdlink

Model Number:GVD-QSFP-4X10G-AC7M

Place of Origin:China

QSFP-4X10G-AC7M 40G Compatible QSFP+ to 4x10G SFP+ Active Direct Attach Copper Breakout Cable 5M​ Description QSFP+ (Quad Small Form-factor Pluggable Plus) copper direct-attach cables are suitable for very short distances and offer a highly cost-effective way to establish a 40-Gigabit link between QSFP+ ports of QSFP+ switches within racks and across adjacent racks. Features Hybrid cable...

Brand Name:SHKE

Model Number:QSFP28-4SFP28 AOC

Place of Origin:China

100G QSFP28 to 4x25G SFP28 Active Optical Cables Features: ● Support 4x25GBASE-SRapplication ● Compliant to QSFP28 MSA SFF-8636 and SFP28 MSA SFF-8431 andSFF-8472 ● Multi rate of up to 25.78125Gbps perlane ● Transmission distance up to 50m ● +3.3V single ...

Brand Name:Global Telecom

Model Number:Fiber optic patch cord

Place of Origin:China

...patch cords QSFP+ to SFP+ OS2 OM3 OM4 MPO MTP patch cord ①MPO/MTP Trunk Cable ②MPO/MTP Harnesses Cables ③MPO/MTP Fan out 0.9mm Patch Cords ④IP-Series MPO/MTP Assembly ⑤High Density Patch Cords ⑥MPO/MTP Loopback ⑦MT Patch Cords ⑧MPO/MTP Cassettes ⑨MPO/MTP Fiber Optic Patch Panel QSFP+ to SFP+ OS2 OM3 OM4 MPO MTP fiber optic fanout cable MTP Breakout cable...

Brand Name:Ruiara

Model Number:MPO/PC- OM4 fiber patch cord

Place of Origin:Shenzhen of China

...Patch Cord OM3 Multi-Mode 12Cores Aqua LSZH Fiber Optic Cable Type A/Type B/Type C Product Paramenters Fiber Optic Cable MTP/MPO Product description: MPO/MTP cable, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles. It is optimized for 40G QSFP+ SR4 to 10G SFP+ SR, 100G QSFP SR4 to 25G SFP...

Brand Name:Top-Trans

Model Number:QSFP-4SFP10G-CU3M

Place of Origin:China

QSFP-4SFP10G-CU3M compatible Cisco 40GBASE-CR4 QSFP to 4 10GBASE-CU SFP+ Direct Attach Breakout Cable 40G QSFP+ to 4xSFP+ Direct Attach Cable Passive Twinax 3m Cisco compatible QSFP to four SFP+ copper direct-attach breakout cables are suitable for very short distances and offer a very cost-effective way to connect within racks and across adjacent racks. These breakout cables connect to a 40G QSFP...

Brand Name:Takfly/OEM

Model Number:MPO Patch cord

Place of Origin:Shenzhen, China

...Patch-Cable Fiber Optic MPO/MTP Patch Cord Description: MPO Breakout cable, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles. It is optimized for 40G QSFP+ SR4 to 10G SFP+ SR, 100G QSFP SR4 to 25G SFP...

Brand Name:KCO, Kocent Optec Limited

Model Number:QSFP+ copper cable

Place of Origin:Guangdong, China

...QSFP+ to SFP+ Cable 40 GBPS Compatible CISCO H3C JUNIPER Quick detail: Name 5 meters QSFP+ 40G to 4 1SFP+ 10G cable assembly Model CAB-QSFP/4SFP-P5M Brand KCO Product type QSFP+ to SFP + Speed 40 GBPS Connect type 40G QSFP (1pc) to 10G SFP (4 pcs) Wire diameter 26 AWG Cable length 10 meters Warranty time 3 years QSFP+ to 4 SFP+ high-speed cable...

Brand Name:OMC or OEM

Model Number:MTP to 6 LC UPC Duplex MM Trunk Cable

Place of Origin:China

... harness Cables are terminated with MTP and LC/SC/FC/ST connector on both ends. The 12pcs(6pcs for LC uniboot;12 LC Simplex) fanout cables are optimized for 40G QSFP+ PLR4 to 10G SFP+ LR optics direct connection and high-density data center applications.

Brand Name:HILINK

Model Number:HL-QSFP-4SFP-5M

Place of Origin:China

QSFP-4SFP10G-5m Twinax Cable Assembly breakout General Description Hilink QSFP to 4x SFP+ Splitter Cable Juniper QFX-QSFP-DACBO-3M offers IT professionals a cost-effective interconnect solution for merging 40G QSFP and 10G SFP+ enabled host adapters, switches and servers. For typical applications, users can install this splitter cable between an available QSFP port on their 40 Gigabit/s rated switch and feed up to four upstream 10GbE-SFP...

Brand Name:OLKOPTO

Model Number:OLSQ84XA-CDM34S

Place of Origin:Shenzhen China

QSFP+ Breakout To SFP+ AOC Cable 3m 20pin Connector Cisco Supported Cisco 100% Supported QSFP+40Gb/S QSFP+ Breakout To 10Gb/S SFP+ Active Optical Cable 3m Product Features Fully RoHS Compliant Full channel operating up to 41.2Gb/s Hot plugable QSFP+ 38pin connector to Hot plugable SFP+ 20pin connector cable length up to 3m Low power consumption: QSFP+＜1.5W,SFP...

Brand Name:JIE TAI XIN

Model Number:JT-8009-DXLU-09

Place of Origin:China

...cable 50/125 LC to LC 80M Multimode duplex Describe: OM4 fiber is a laser-optimized, high bandwidth 50um multimode fiber. OM4 fiber supports Ethernet, Fibre Channel, and OIF applications, allowing extended reach upwards of 550 meters at 10 Gb/s for ultra long building backbones and medium length campus backbones OM4 Duplex Multimode Fiber Optic Patch Cables are ideal for connecting SFP+, QSFP...

Brand Name:New Light

Model Number:MPO / MTP - MPO / MTP

Place of Origin:Shenzhen,China

...transceivers or to connect MTP trunk cables to QSFP+ (QSFP28) transceivers. The MTP to MTP patch cables sold online here are for the first application. New Light also stock MTP patch cables for the second application but these are not offered online due to

Place of Origin:China

...SFP+ AOC Optical Cable QSFP/QSFP28 Direct Connection Cable 1 To 4 Compatible With Huawei H3C Cisco Product optional 10G SFP+ AOC Optical Cable 25G SFP28 AOC Optical Cable 40G QSFP+ AOC Optical Cable QSFP+ to 4*SFP AOC Optical Cable 100G QSFP28 AOC Optical Cable Length Optional 1~100m as per your needs Parameters Product Name 25G SFP28 AOC Optical Cable Rate 25Gb/s Port SFP28 to SFP28 Product Name 40G QSFP+ AOC Optical Cable...

Brand Name:Sourcelight or OEM

Model Number:QSFP-H40G-1M

Place of Origin:Shenzhen,China

40GBASE-CR4 QSFP Direct-attach Copper Cable Passive 1M / 3M / 5M​ Specifications Part Number Product Description AWG 40G QSFP+ Copper Direct-attached Cable CAB-QSFP-50CM 40GBASE-CR4 QSFP+ direct-attach copper cable, 0.5 meter passive 30 CAB-QSFP-1M 40GBASE...

Brand Name:UNIFIBER-OEM

Model Number:MPO/MTP

Place of Origin:CHINA

... termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles. With US Conec MTP connectors and Corning SMF-28 ultra optical fiber, it is optimized for 40G QSFP+ PLR4 to 10G SFP+ LR,

Brand Name:CFOFC

Model Number:CFOFC-40G QSFP DAC

Place of Origin:Shenzhen,China

... cost alternative for short reach 4X applications. They are designed to be fully compatible in form factor and optical/electrical connections according to the QSFP Multi-Source Agreement. QSFP+ connectors provide four channels of data in one

Brand Name:KCO, Kocent Optec Limited

Model Number:QSFP+ copper cable

Place of Origin:Guangdong, China

...QSFP+ to SFP+ Cable 40 GBPS Compatible CISCO H3C JUNIPER Quick detail: QSFP+ to 4 SFP+ high-speed cable component is a set of to implement low cost, high benefit of high-speed Internet solutions, for clients to achieve 40G and 10G equipment (NIC/HBA/CNA, switch device and a server) between the interconnection. In a typical application, the user can use this cable to realize existing 40 g QSFP...