pu mold release agent water based

Brand Name:Lubekote

Model Number:xxxxx

Place of Origin:China

... is dry and non-sticky Minimal mould build-up, reduces need for mould cleaning Does not affect the post process Application: Molds should be clean before using. Apply a

Brand Name:JOYWAY

Model Number:PU-5074

Place of Origin:China

...Release agent PU-5074 Mould release agent water base for the shoe sole for the upper mould Characteristic: PU-5074 is a emulsion formed by mixing siloxane and silicone resin. Mainly used for polyurethane soles, self-crust, hard foam and other products, dry surface, light Natural, good alcohol solubility Physical property: Item Data Appearance White liquid Solid content 28% Density About 1.0 PH 7.0-8.0 Emulsifying agents nonionic Diluent Water

Brand Name:CLLZY

Model Number:pva-005

Place of Origin:JIANGSU, CHINA

PVA marble release film is a mold release agent used primarily in the production of artificial marble. Made from PVA (polyvinyl alcohol) and other components. This film forms a thin layer on the mold surface to prevent the artificial marble material from ...

Brand Name:LANSEN CHEM

Model Number:LSC-500

Place of Origin:CHINA

...proprietary manufacturing method. It functions as an efficient anti-adhesion agent, mold release agent, separator, and sticking inhibitor, making it ideal for rubber and plastic applications. The emulsion forms a uniform, slippery coating on the surface of

Brand Name:PLYFIT

Model Number:D0201

Place of Origin:Guangdong

... raw materials, and selected premium non-toxic environmentally friendly products as the propellant; 2.) Good finishing of the product surface, not greasy, mold releasing for many times, cost savings. Mold release agent: Applicable to

Brand Name:EXCEEDCHEM

Model Number:Water Based Release Agent

Place of Origin:China

... Chemical Composition: The water based release agent for shoe Sole is made by special silicone oil, wax liquid and surfactant by special process. 2. Properties Item Index Appearance Milky ...

Brand Name:WeiLi Resin®

Model Number:WQ-W40

Place of Origin:China

Water Resistane And Anti-Sticking Wax Dispersion For Water-Based Ink And OPV WQ-W40 Wax Dispersion Introduction WQ-W40 is a synthetic wax dispersion emulsion with 40% solid content. It is recommended to be used in water-based coatings to improve the slipperiness, anti-sticking and water resistance of products. It can be used as a lubricant and softener for yarns in the textile industry; water-resistant agent and mold release agent...

Brand Name:Stoner

Model Number:8#

Place of Origin:The USA

...Mold Release Wax Agent For Composite FRP Demoulding # No. 8 V2.0-311g Basic information 1. Eco-Friendly 311g/can Dry Mould Release Agent/waxis a chemical used to prevent other materials from bonding to surfaces. 2. It can provide a solution in processes involving mold release, metal die-cast release, plastic release, adhesive release, and tire and PU foam release...

Brand Name:Ciyu

Model Number:Ciyu10001

Place of Origin:China

Roll Water Soluble Film Packaging For Mold Release , 1000-2000mm Width PVA Film for Mold Releasing PVA film is an excellent option of mold releasing agent in unsaturated polyester epoxide resin or other thermosetting resin. Currently PVOH film has been ...

Brand Name:Qiantai Chemical

Place of Origin:Guangdong, China

Product Description: The Textile Finishing Agent is a cutting-edge product designed to enhance the performance of clothing finishing formulas through its unique composition and specialized properties. This innovative solution is formulated with a blend of ...

Place of Origin:China

Water based Flexible PU foam is an environmental protection type using water as blowing agent, with good performances of low density ( 8~10kg/m3 ), open cell, flame retardant( B3 grade) etc. During spray process in site, the breathing small open cell filled with air, without producing toxic gas to destroy the Ozone layer( traditional blowing agent...

Brand Name:WeiLi@

Model Number:WL-AD391

Place of Origin:China

... acrylic dispersion engineered for formulating premium two-component polyurethane (2K PU) coatings when crosslinked with water-based isocyanate curing agents. Designed for demanding topcoat/clearcoat applications across metal and wood substrates, it...

Model Number:SKY-1826

Place of Origin:China

Brand Name:SKYHIL

Zinc Stearate CAS No.: 557-05-1 As a Fine Powder Used For Gloss Imparting Agent In Paint Industry Product Description Zinc stearate CAS:557-05-1 Molecular Formula: C36H70O4Zn Molecular Weight: 632.33 EINECS:209-151-9 Appearance: white fine powder Zn ...

Brand Name:Tianyang Rotational Molding

Place of Origin:China

Model Number:ZJ-CS

...water tanks by rotational molding. In the process of manufacturing large water storage tanks, the specific steps involved in the operation of a roto-molding machine are typically as follows: 1. Mold preparation Clean the mold: Ensure that the interior and exterior of the mold are clean, avoiding any impurities that may affect the finished product. Apply release agent: Apply release agent...

Brand Name:Chang Feng

Model Number:CF-23

Place of Origin:An Ping China

PU Filter Skeleton Mould For Nissan Heavy-Duty Vehicles Air Filters Materialerial 1. Product introduction The process flow of PU skin molding is as follows: first spray release agent on the upper and lower molds of the skin molding mold, and then spray in mold paint on the surface of the lower mold, which can be sprayed with in mold paint of different colors. Then set the mold and pour two-component polyurethane raw materials, and start the mold

Brand Name:MC-Silicone

Model Number:MCSIL-2030

Place of Origin:CHINA

...Molds RTV-2 silicone rubber is a two component material, and it consist of Part A base silicone and Part B curing agent. When the two parts mix together and pour or brush on a object, the silicone base and curing agent can cure to be a silicone mold at room temperature; And 24 hours later, the silicone mold can be released from the object, and then the silicone mold

Place of Origin:Fujian, China

Brand Name:OTI

Model Number:custom

...release valve cross slit valve Material High quality silicone rubber material Size Standard size or customized size based on customer's requirement Color Refer to pantone card number Hardness 30-80 shore A Technology printing, embossed, debossed, laser etched, epoxy coating, PU coating, hand feel oil spray Feature durable and long-lasting,Water...

Brand Name:ARISTO

Model Number:AL7503

Place of Origin:CHINA

...Water Resistance And Heavy Load Bearing Capacity 400ml / 500ml Product Description: 1) Specifically formulated to provide superior all purpose lubrication and protection. 2) Prolongs life, prevents squeaks and lubricates. For all general and light duty mechanical lubrication purposes. 3) Use is as a moisture barrier for electrical contacts, a rubber and plastic lubricant, a mold release agent...

Brand Name:WOODSON

Model Number:JJ-002

Place of Origin:China

Premium leather foaming cleaner contains natural coconut oil derivative and mildew fat agent of water based products. It has the characteristics of low carbon, strong clean, does not destroy leather itself permeability and quality. It's necessary article...

Brand Name:Tunsing

Model Number:DS1901

Place of Origin:China

Pu Hot Melt Tpu Polyurethane Adhesive Film For Silicone Products Product: DS1901 Description: This kind of hot melt adhesive film for liquid (solid) silica gel high temperature vulcanization molding process has a stable adhesion, and the rubber film and silica gel treatment agent is not toxic, no foaming, no stratification and other characteristics. Composition: Polyurethane Physical Characteristics: Color Transparent Release...