pu mold release agent high dilution

Brand Name:Lubekote

Model Number:xxxxx

Place of Origin:China

... build up on the molds No rust on mold Excellent performance of produced parts Excellent release properties Application: The mold should be thoroughly cleaned. Mold cleaning and release agent application should be performed in a well ventilated area.

Brand Name:JOYWAY

Model Number:PU-7620

Place of Origin:China

...silicone resin. Mainly used for: polyurethane molding, FRP process molding, polydiamide, phenolic, polyester and epoxy resin. Process: It can be used in the Polyurethane and rubber field. It should be diluted into 20-25 time for the shoe sole production.

Brand Name:PLYFIT

Model Number:D0201

Place of Origin:China

Mold Release silicone spray 450ML Mold release agent/ silicone spray from factory directly Product Description 1.) It selected the modulation of high load, anti-extreme pressure, high wear-resistant compound raw materials, and selected premium non-toxic environmentally friendly products as the propellant; 2.) Good finishing of the product surface, not greasy, mold releasing for many times, cost savings. Mold release agent: Applicable to mold

Brand Name:Tekoro

Model Number:TE-8049

Place of Origin:China

... applications, where post mould painting is not required. This product has a light duty silicone content and is a rapid dry, anti-stick mould release agent suitable for cold and hot moulds. It prevents sticking, which increases the life of does and moulds,

Brand Name:EXCEEDCHEM

Model Number:Release agent for polyurethane elastomer

Place of Origin:China

PU Elastomer Moulding Release Agent 1. DESCRIPTION This product is a kind of modified silicone mainly use for PU products,high-grade parting agent. Which has several excellence character,smooth,isolation,high and low temperature resistance,no corrosivity...

Place of Origin:Guangdong, China

Brand Name:ShinEtsu

Model Number:ShinEtsu KF-96SP

Shin-Etsu Japan Kf-96sp Dimethyl Silicone Spray Mold Release Agent Product Simple Attributes Shin-Etsu KF-96SP is a high-performance dimethyl silicone oil spray, featuring excellent heat resistance, lubrication, and demolding properties. It is suitable...

Brand Name:Stoner

Model Number:8#

Place of Origin:The USA

...Mold Release Wax Agent For Composite FRP Demoulding # No. 8 V2.0-311g Basic information 1. Eco-Friendly 311g/can Dry Mould Release Agent/waxis a chemical used to prevent other materials from bonding to surfaces. 2. It can provide a solution in processes involving mold release, metal die-cast release, plastic release, adhesive release, and tire and PU foam release...

Brand Name:JT

Model Number:JT616

Place of Origin:HUBEI, CHINA

...Mold Mould Release Agent for Electrical Insulators TDS: Performance parameters: Aspect Unit Value colour and lustre — Transparent liquid Viscosity mPa.s 15 Flash point ℃ 65 Spread rate ㎡ 20-25 Density g/mm3 0.90-0.92 Product Description: JT 6101 Organic Silicon Mould Release agent Features: Good release effect high stability No reaction with the casting material Not corrode the mold...

Brand Name:LANSEN CHEM

Model Number:LSC-500

Place of Origin:CHINA

...Release Agent Effective Solution for Rubber Products Releasing Product Description: Advanced Water-Based Calcium Stearate Dispersion This innovative formulation is an aqueous suspension of calcium stearate manufactured using our exclusive processing technology. It serves as a highly effective multi-functional solution for: Anti-blocking applications Mold separation Surface release...

Brand Name:Cersol

Place of Origin:China

CBN-E10 is a lubricant, mold release agent, and mold release agent for various high-temperature operations. Such as glass industry, mold protection, metal welding industry, etc., This product can effectively lubricate and isolate the interface, making the ...

Brand Name:CLLZY

Model Number:pva-005

Place of Origin:JIANGSU, CHINA

PVA marble release film is a mold release agent used primarily in the production of artificial marble. Made from PVA (polyvinyl alcohol) and other components. This film forms a thin layer on the mold surface to prevent the artificial marble material from ...

Brand Name:Ciyu

Model Number:Ciyu10001

Place of Origin:China

... auxiliary materials like plasticizer, soften agent, surface acting agent and dispersing agent, then finally finished thorough specific film-forming technology process. Main Characteristics of PVA film products: 1. High barrier property. (Oxygen barrier;

Brand Name:AEROPAK

Model Number:APK-8601

Place of Origin:China

...Release Spray High Temperature Silicone Release Agent Product description of Aeropak Steel Mould Release Spray Aeropak steel Mould Release Spray is ideal for plastics and rubber use, metallic casting,and can be applied in temperature between60"c ~ 150"c, forming a release film that prevents body adhesion, and will not corrode the mould surface. Aeropak steel Mold Release Spray Prevents sticking in gluing, sealing and molding

Brand Name:Chang Feng

Model Number:CF-23

Place of Origin:An Ping China

PU Filter Skeleton Mould For Nissan Heavy-Duty Vehicles Air Filters Materialerial 1. Product introduction The process flow of PU skin molding is as follows: first spray release agent on the upper and lower molds of the skin molding mold, and then spray in mold paint on the surface of the lower mold, which can be sprayed with in mold paint of different colors. Then set the mold and pour two-component polyurethane raw materials, and start the mold

Brand Name:Hongshun

Model Number:HS-6544AFG

Place of Origin:Guangdong

...Molds High Precision Cleaning Vacuum Hydrocarbon Line Overview: This fully auto vacuum hydrocarbon line delivers high precision cleaning for dies and molds, crucial for maintaining production quality. Its sealed vacuum system uses specialized hydrocarbons to dissolve mold release agents, resin residues, and carbon deposits from intricate mold...

Brand Name:MC silicone

Model Number:MCPLA-L25A/B

Place of Origin:CHINA

...Molding Rubber For Food Molds MCPLA-L25A/B are platinum-cured (also known as addition-cure), room temperature-curing silicones that cure to flexible, high-strength rubbers. MCPLA-L25A/B molds offer excellent release properties and release agent is not necessary when casting most materials. Features High...

Brand Name:Tunsing

Model Number:DS1901

Place of Origin:China

Pu Hot Melt Tpu Polyurethane Adhesive Film For Silicone Products Product: DS1901 Description: This kind of hot melt adhesive film for liquid (solid) silica gel high temperature vulcanization molding process has a stable adhesion, and the rubber film and silica gel treatment agent is not toxic, no foaming, no stratification and other characteristics. Composition: Polyurethane Physical Characteristics: Color Transparent Release...

Brand Name:skymen

Model Number:JP-720G

Place of Origin:China Mainland

... cleaner work ? Cavitation, the collapse of millions of tiny bubbles created by ultrasonic vibrations, releases high energy and enormous cleaning power. This cleaning action gently and thoroughly removes dirt, oil, and contaminants from every surface in

Brand Name:UTrust Mould

Model Number:DS-01

Place of Origin:China

SMC Door Skin Mould The following is about SMC Door Skin Mould related Doorskin mould.I hope to help you better understand SMC Door Skin Mould. SMC is sheet mould compound SMC is a mixture of polymer resin, insert fillers, fiber reinforcement, catalyst, ...

Place of Origin:Fujian, China

Brand Name:OTI

Model Number:custom

Item medical silicone air release valve cross slit valve Material High quality silicone rubber material Size Standard size or customized size based on customer's requirement Color Refer to pantone card number Hardness 30-80 shore A Technology printing...