pu mold release agent for elastomer

Brand Name:Lubekote

Model Number:xxxxx

Place of Origin:China

... Demolding for PU elastomer Product Description Mold Release Agent for PU Microporous Elastomer Advantages Strong demolding ability Easy to use Excellent surface finish Application Instructions Molds should be clean before using Apply a thin coat of our

Brand Name:JOYWAY

Model Number:PU-7620

Place of Origin:China

...silicone resin. Mainly used for: polyurethane molding, FRP process molding, polydiamide, phenolic, polyester and epoxy resin. Process: It can be used in the Polyurethane and rubber field. It should be diluted into 20-25 time for the shoe ...

Brand Name:EXCEEDCHEM

Model Number:PU Release Agent

Place of Origin:China

.pd-container { font-family: Arial, sans-serif; color: #333; line-height: 1.5; max-width: 100%; margin: 0 auto; padding: 15px; box-sizing: border-box; } .pd-heading { font-size: 18px !important; font-weight: 700; color: #222; margin: 20px 0 10px 0; padding...

Brand Name:Hensen

Model Number:I75L

Place of Origin:Qingdao, China

...Releasing Agent Release Graphite A Powder Mould Releasing Agent A release agent is an interface coating used on two surfaces that tend to stick to each other to make the surface easy to release, smooth and clean. Mold release agents are used in a wide variety of molding operations including metal die casting, polyurethane foams and elastomers, glass fiber reinforced plastics, injection molded

Brand Name:Stoner

Model Number:8#

Place of Origin:The USA

...Mold Release Wax Agent For Composite FRP Demoulding # No. 8 V2.0-311g Basic information 1. Eco-Friendly 311g/can Dry Mould Release Agent/waxis a chemical used to prevent other materials from bonding to surfaces. 2. It can provide a solution in processes involving mold release, metal die-cast release, plastic release, adhesive release, and tire and PU foam release...

Brand Name:Chang Feng

Model Number:CF-23

Place of Origin:An Ping China

PU Filter Skeleton Mould For Nissan Heavy-Duty Vehicles Air Filters Materialerial 1. Product introduction The process flow of PU skin molding is as follows: first spray release agent on the upper and lower molds of the skin molding mold, and then spray in mold paint on the surface of the lower mold, which can be sprayed with in mold paint of different colors. Then set the mold and pour two-component polyurethane raw materials, and start the mold

Brand Name:Tunsing

Model Number:DS1901

Place of Origin:China

Pu Hot Melt Tpu Polyurethane Adhesive Film For Silicone Products Product: DS1901 Description: This kind of hot melt adhesive film for liquid (solid) silica gel high temperature vulcanization molding process has a stable adhesion, and the rubber film and silica gel treatment agent is not toxic, no foaming, no stratification and other characteristics. Composition: Polyurethane Physical Characteristics: Color Transparent Release...