power cord bending test apparatus

Brand Name:Pego

Model Number:PG-FT01

Place of Origin:China

...Testing Equipment Power Cord Bending Test Apparatus with 16A Output Current 1. Introduction Power cord bending test apparatus designs to meet the test requirements of IEC60320-1 clause 22.3, for applying bending test to cord of connectors and plug connectors. The test apparatus is configure with 7 inch LCD touch screen, PLC and step motor. The flexing angle, flexing speed an test...

Brand Name:HongCe

Model Number:PCF-1

Place of Origin:China

...appliance. It conforms to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a supply cord that are moved while in operation shall be constructed so that the supply cord is adequately protected against excessive flexing where it

Brand Name:KINGPO

Place of Origin:China

...Adjustable Bend Angle Product information: This test apparatus checks the protection of the supply cord where it enters the appliance. It conforms to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a supply cord that are moved

Brand Name:HJ

Model Number:HJ0608A

Place of Origin:China

... 23.3 and 25.14, figure 8. Application: It is used to check the power cord flexing (bending) resistance performance of the small household appliances (such as Coffee pot / electric iron) and lamps, also applicable for power cord flexing endurance tester of

Brand Name:KINGPO

Place of Origin:DONGGUAN

Model Number:KP-8820

...Power Cord Flexing Test Apparatus Testing the Protection Capability of Cord Product information: This test apparatus checks the protection of the supply cord where it enters the appliance. It conforms to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a supply cord that are moved while in operation shall be constructed so that the supply cord...

Brand Name:Sinuo

Model Number:SN2121

Place of Origin:China

...Power Cord Flexing Test Apparatus For Flexible Cable Plugs Product Information For Power Cord Flexing Test Apparatus: The power cord flexing test apparatus meets the requirements of IEC 60884-1:2022 figure 21 clause 23.4, which is used to process the flexing test for the flexible cable of non-rewirable plugs and non-rewirable portable socket-outlets. Technical parameters For Power Cord Flexing Test Apparatus: Power...

Brand Name:Infinity Machine

Model Number:RS-8105

Place of Origin:Made in China

... cable forward to the center of the turnplate. Pull the cable vertically with load at rated bending speed, angle and times then to begin the bending test. When the tester stops automatically, check the jacket damage and the breakage rate of conductors.

Brand Name:ZL

Model Number:ZL-3424

Place of Origin:China

...Power Cord Bending Tester With Electric Driving and PLC Control Overview: The equipment is according to GB4706.15,IEC 60335-2-23:11.101 A specially designed and manufactured device for hair care fitted with a rotating connection Test the bending resistance of the appliance's power cord. Test principle: The appliance equipped with a rotary connection is placed so that the spindle is horizontal and the power cord...

Brand Name:Sinuo

Model Number:SN1112E

Place of Origin:China

... to the standard requirement of IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to ...

Brand Name:AI

Model Number:AIBXW-16

Place of Origin:CHINA

...bending test apparatus is applicable to the bending test of various enameled flat wires, paper wrapped flat wires, glass fiber wrapped flat wires, film wrapped wires and other electromagnetic wires with a wide edge of less than or equal to 16mm, as well as the corresponding copper and aluminum flat wires. Major Technical Parameters Bending...

Brand Name:SHC

Model Number:SC-RL03

Place of Origin:China

IEC60884 figure 20 cord retention test apparatus manual type Product details: This device conforms to the standard of IEC60884-1 table 18. It is used to test plugs, mobile sockets, fixed parts with wires and their couplings under the protection of the ...

Brand Name:JT

Model Number:custom

Place of Origin:Zhejiang, China (Mainland)

... Brazil Power Cords Or Brazil Power Cables Come In A Variety Of Wire Sizes, Lengths, Amps, Volts And Ends. The Brazil Plug Can Be Used In Brazil. Americord Offers The Finest In International Power Cords. Most Cords Are In Stock And Ready To Ship Within

Brand Name:DAXIAN

Model Number:DX8431

Place of Origin:China

...Power Cords Pulling Force And Torque Testing Machine Product Description: This instrument is based on the GB2099.1, GB4706 and IEC60320 standards, used to test the tensile and torsion tests of various types of electrical power cords, and to assess whether the power cord...

Brand Name:RECEN

Model Number:RC-TM-003

Place of Origin:China

Electro-Hydraulic Servo Microcomputer Control Universal Test Machine Compression Bending Product Profile The testing machine is mainly suitable for steel strand stretching and metal material stretching, compression, bending, shearing and other tests. ...

Brand Name:MIYU

Model Number:MY-XC-C6-R

Place of Origin:China

Wire/Cable Bending Tester (MY-XC-C6), Sheet metal material with white color Description This testing machine is customized according to the "General Safety Requirements for Communication Cord and Power Cord" and is written by advanced touch screen. PLC ...

Brand Name:Kinte

Model Number:WH-8801C

Place of Origin:Guangdong,China (Mainland)

... cord common safety requirements" requirement. Applicable to the manufacturer and the goods seized the electrical products on the power cord, DC line bending test. This test machine is divided into electrical testing and load testing two test methods. By

Brand Name:JIEDONG

Model Number:JD-3001C

Place of Origin:Guangdong, China

... with the requirements of UL-817 related standard "General safety requirements for cord components and power cords". Applicable to the relevant manufacturers and quality inspection departments to bend the power line and DC line. It is used to test the

Brand Name:YUYANG

Model Number:YY-5622

Place of Origin:China

...Bending Tester This tester complies with UL817 and other relevant standards "General Safety Requirements for Flexible Cord Components and Power Cords". It is suitable for power cords and DC cords to conduct bending test by relevant manufacturers and quality inspection departments. This machine specializes in testing plug lead wire and cable bending...